CI: try fixing musl build

Release v2.13.2

.github/ISSUE_TEMPLATE/bug_report.md

@@ -7,19 +7,25 @@ assignees: ''
 
 ---
 
+Be sure to read [FAQ](https://github.com/fastfetch-cli/fastfetch?tab=readme-ov-file#faq) before submitting a new issue.
+
 <!-- We will try hard to solve the issue. However since platforms and hardwares vary greatly, it can be hard to find the root cause is. Providing following information may help us greatly. Thanks in advance -->
 
 # General description of bug:
 
 * What happened:
 * What should happen:
+* Fastfetch version used: <!-- please use the latest version, if possible -->
 * Did it work in an older version: <!-- if yes, which version -->
 * Where did you get the binary: <!-- Github Release / Github Actions / Installed with a package manager (What package manager) / Built from source yourself -->
 * Does this issue still occurs in [the latest dev build](https://github.com/fastfetch-cli/fastfetch/actions/)?
 
 # Often helpful information:
 
-The content of the configuration file you use (if any)
+Screenshot:
+<!-- Paste the screenshot here -->
+
+The content of the configuration file you use (if any):
 ```
 //paste here
 ```
@@ -38,24 +44,27 @@ Output of `fastfetch --list-features`:
 //paste here
 ```
 
-## If fastfatch crashed
+## If fastfatch crashed or freezed
 
 Paste the stacktrace here. You may get it with:
 
-```
-$ gdb /path/to/fastfetch
-$ run
-$ bt
+```shell
+# You may need Ctrl+C to stop the process if it freezes
+gdb -q -ex 'set confirm off' -ex run -ex 'bt full' -ex quit --args /path/to/fastfetch
 ```
 
 If you are able to identify which module crashed, the strace can be helpful too
 
-```
-$ strace /path/to/fastfetch --multithreading false --structure {MODULE} --pipe
+```shell
+strace /path/to/fastfetch --multithreading false -s {MODULE} --pipe
 ```
 
 If you cannot do the instructions above, please upload the core dump file:
 
+## If fastfetch is slow
+
+Use `time fastfetch --stat` to show time usage for each module.
+
 ## If my image logo didn't show / work
 
 <!-- Please make sure the terminal does support the image protocol you used. Note Gnome terminal doesn't support any image protocols -->
@@ -67,10 +76,5 @@ If you cannot do the instructions above, please upload the core dump file:
 
 ## If fastfetch behaves incorrectly on shell starting
 
-<!-- NOTE for zsh / p10k users:
-There are known incompatibility between fastfetch and p10k instant prompt.
-The p10k doc clearly states that you should NOT print anything to stdout after p10k-instant-prompt is initialized.
-You should either put `fastfetch` before initialization of p10k-instant-prompt (recommended), remove it or use `fastfetch --pipe false` -->
-
 * The bug is reproduceable with fresh / clean shell configuration (i.e. `fastfetch` is the single line of `.zshrc` or `~/.config/fish/config.fish`): 
 * Does `sleep 1` before running `fastfetch` work? 

.github/ISSUE_TEMPLATE/feature_request.md

@@ -7,10 +7,28 @@ assignees: ''
 
 ---
 
-<!-- Before requesting a new feature, please try `fastfetch -c all.jsonc` to see if it has been supported -->
+## Before requesting a new feature
 
-# Current state:
+* A lot of features are not enabled by default. Please try `fastfetch --list-modules` and `fastfetch -c all.jsonc` to see if it has been supported
+* Fastfetch supports `Command` module, which can be used to grab output from a custom shell script. Please check if it fits your needs
 
-# Wanted state:
+```jsonc
+// ~/.config/fastfetch/fastfetch.jsonc
+{
+    "modules": [
+        {
+            "type": "command",
+            "text": "/path/to/your/script",
+            "key": "Feature Title"
+        }
+    ]
+}
+```
 
-# Why the change is sensible:
+## Wanted features:
+
+<!-- Your features here -->
+
+## Motivation:
+
+<!-- Your motivation here -->

.github/ISSUE_TEMPLATE/logo_request.md

@@ -7,9 +7,11 @@ assignees: ''
 
 ---
 
+Tip: A logo can be displayed by fastfetch without getting into fastfetch's official repo. For highly customized logo for personal use, it's recommended to keep it locally. Please refer to https://github.com/fastfetch-cli/fastfetch/wiki/Migrate-Neofetch-Logo-To-Fastfetch
+
 # OS
 ```
-Paste content of /etc/os-release here. If this file doesn't exist, describe a way to identify the distro.
+Paste content of /etc/os-release and /etc/lsb-release here. If none of these files exist, describe a way to identify the distro
 ```
 
 # Ascii

.github/workflows/ci.yml

@@ -10,34 +10,23 @@ jobs:
 
     steps:
       - name: checkout repository
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Install codespell
         shell: bash
-        run: sudo apt update && sudo apt install -y codespell
+        run: |
+          sudo apt-get update || true
+          sudo apt-get install -y codespell
 
       - name: Run Spellchecker
         run: codespell
 
-  linux-buildtest:
-    name: Linux build test
+  no-features-test:
+    name: No-features-test
+    runs-on: ubuntu-latest
     permissions:
+      security-events: write
       contents: read
-    strategy:
-      fail-fast: false
-      matrix:
-        os: [ubuntu-22.04, ubuntu-20.04]
-        compiler: [
-          { cc: gcc, cxx: "g++" },
-          { cc: clang, cxx: "clang++" },
-          { cc: "musl-gcc", cxx: "musl-g++" }
-        ]
-        enableFeatures: [ON, OFF]
-        exclude:
-          # The feature libraries are all build against glibc, so they can't be used with musl
-          - compiler: { cc: "musl-gcc", cxx: "musl-g++" }
-            enableFeatures: ON
-    runs-on: ${{ matrix.os }}
     steps:
       - name: checkout repository
         uses: actions/checkout@v4
@@ -45,22 +34,13 @@ jobs:
       - name: uname -a
         run: uname -a
 
-      - name: install required packages
-        run: sudo apt-get update && sudo apt-get install -y musl-dev musl-tools linux-headers-generic libpci-dev libvulkan-dev libwayland-dev libxrandr-dev libxcb-randr0-dev libdconf-dev libdbus-1-dev libmagickcore-dev libxfconf-0-dev libsqlite3-dev librpm-dev libegl-dev libglx-dev libosmesa6-dev ocl-icd-opencl-dev libnm-dev libpulse-dev directx-headers-dev libdrm-dev
-
       - name: configure project
-        env:
-          CC: ${{ matrix.compiler.cc }}
-          CXX: ${{ matrix.compiler.cxx }}
-        run: cmake -DCMAKE_BUILD_TYPE=RelWithDebInfo -DENABLE_LIBPCI=${{ matrix.enableFeatures }} -DENABLE_VULKAN=${{ matrix.enableFeatures }} -DENABLE_WAYLAND=${{ matrix.enableFeatures }} -DENABLE_XCB_RANDR=${{ matrix.enableFeatures }} -DENABLE_XCB=${{ matrix.enableFeatures }} -DENABLE_XRANDR=${{ matrix.enableFeatures }} -DENABLE_X11=${{ matrix.enableFeatures }} -DENABLE_GIO=${{ matrix.enableFeatures }} -DENABLE_DCONF=${{ matrix.enableFeatures }} -DENABLE_DBUS=${{ matrix.enableFeatures }} -DENABLE_XFCONF=${{ matrix.enableFeatures }} -DENABLE_SQLITE3=${{ matrix.enableFeatures }} -DENABLE_RPM=${{ matrix.enableFeatures }} -DENABLE_IMAGEMAGICK7=${{ matrix.enableFeatures }} -DENABLE_IMAGEMAGICK6=${{ matrix.enableFeatures }} -DENABLE_CHAFA=${{ matrix.enableFeatures }} -DENABLE_ZLIB=${{ matrix.enableFeatures }} -DENABLE_EGL=${{ matrix.enableFeatures }} -DENABLE_GLX=${{ matrix.enableFeatures }} -DENABLE_OSMESA=${{ matrix.enableFeatures }} -DENABLE_OPENCL=${{ matrix.enableFeatures }} -DENABLE_LIBNM=${{ matrix.enableFeatures }} -DENABLE_PULSE=${{ matrix.enableFeatures }} -DENABLE_DIRECTX_HEADERS=${{ matrix.enableFeatures }} -DENABLE_DRM=${{ matrix.enableFeatures }} .
+        run: cmake -DSET_TWEAK=Off -DBUILD_TESTS=On -DCMAKE_INSTALL_PREFIX=/usr . -DENABLE_VULKAN=OFF -DENABLE_WAYLAND=OFF -DENABLE_XCB_RANDR=OFF -DENABLE_XCB=OFF -DENABLE_XRANDR=OFF -DENABLE_X11=OFF -DENABLE_DRM=OFF -DENABLE_GIO=OFF -DENABLE_DCONF=OFF -DENABLE_DBUS=OFF -DENABLE_XFCONF=OFF -DENABLE_SQLITE3=OFF -DENABLE_RPM=OFF -DENABLE_IMAGEMAGICK7=OFF -DENABLE_IMAGEMAGICK6=OFF -DENABLE_CHAFA=OFF -DENABLE_ZLIB=OFF -DENABLE_EGL=OFF -DENABLE_GLX=OFF -DENABLE_OSMESA=OFF -DENABLE_OPENCL=OFF -DENABLE_LIBNM=OFF -DENABLE_FREETYPE=OFF -DENABLE_PULSE=OFF -DENABLE_DDCUTIL=OFF -DENABLE_DIRECTX_HEADERS=OFF -DENABLE_THREADS=OFF
 
       - name: build project
-        run: cmake --build .
+        run: cmake --build . --target package --verbose -j4
 
-      - name: run tests
-        run: ctest
-
-      - name: run fastfetch --list-features
+      - name: list features
         run: ./fastfetch --list-features
 
       - name: run fastfetch
@@ -72,9 +52,15 @@ jobs:
       - name: run flashfetch
         run: time ./flashfetch
 
-  linux:
-    name: Linux
-    runs-on: ubuntu-20.04 # 22.04 ships a newer version of glibc than debian stable, allow those people to use the debian package
+      - name: print dependencies
+        run: ldd fastfetch
+
+      - name: run tests
+        run: ctest
+
+  linux-amd64:
+    name: Linux-amd64
+    runs-on: ubuntu-20.04
     permissions:
       security-events: write
       contents: read
@@ -88,15 +74,15 @@ jobs:
         run: uname -a
 
       - name: install required packages
-        run: sudo apt-get update && sudo apt-get install -y libpci-dev libvulkan-dev libwayland-dev libxrandr-dev libxcb-randr0-dev libdconf-dev libdbus-1-dev libmagickcore-dev libxfconf-0-dev libsqlite3-dev librpm-dev libegl-dev libglx-dev libosmesa6-dev ocl-icd-opencl-dev libnm-dev libpulse-dev libdrm-dev directx-headers-dev
+        run: sudo apt-get update && sudo apt-get install -y libvulkan-dev libwayland-dev libxrandr-dev libxcb-randr0-dev libdconf-dev libdbus-1-dev libmagickcore-dev libxfconf-0-dev libsqlite3-dev librpm-dev libegl-dev libglx-dev libosmesa6-dev ocl-icd-opencl-dev libnm-dev libpulse-dev libdrm-dev directx-headers-dev
 
       - name: install linuxbrew packages
         run: |
           /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
-          /home/linuxbrew/.linuxbrew/bin/brew install imagemagick ddcutil --ignore-dependencies
+          /home/linuxbrew/.linuxbrew/bin/brew install imagemagick chafa ddcutil --ignore-dependencies
 
       - name: Initialize CodeQL
-        uses: github/codeql-action/init@v2
+        uses: github/codeql-action/init@v3
         with:
           languages: c
 
@@ -104,10 +90,10 @@ jobs:
         run: PKG_CONFIG_PATH=/home/linuxbrew/.linuxbrew/lib/pkgconfig:$PKG_CONFIG_PATH cmake -DSET_TWEAK=Off -DBUILD_TESTS=On -DCMAKE_INSTALL_PREFIX=/usr .
 
       - name: build project
-        run: cmake --build . --target package --verbose
+        run: cmake --build . --target package --verbose -j4
 
       - name: perform CodeQL analysis
-        uses: github/codeql-action/analyze@v2
+        uses: github/codeql-action/analyze@v3
 
       - name: list features
         run: ./fastfetch --list-features
@@ -134,12 +120,167 @@ jobs:
       - name: upload artifacts
         uses: actions/upload-artifact@v4
         with:
-          name: fastfetch-linux
+          name: fastfetch-linux-amd64
           path: ./fastfetch-*.*
 
-  macos:
-    name: MacOS
-    runs-on: macos-latest
+  linux-aarch64:
+    name: Linux-aarch64
+    runs-on: ubuntu-22.04
+    permissions:
+      security-events: write
+      contents: read
+    steps:
+      - name: checkout repository
+        uses: actions/checkout@v4
+
+      - name: run VM
+        uses: uraimo/run-on-arch-action@v2
+        id: runcmd
+        with:
+          arch: aarch64
+          distro: ubuntu22.04
+          githubToken: ${{ github.token }}
+          run: |
+            uname -a
+            apt-get update && apt-get install -y cmake make g++ libvulkan-dev libwayland-dev libxrandr-dev libxcb-randr0-dev libdconf-dev libdbus-1-dev libmagickcore-dev libxfconf-0-dev libsqlite3-dev librpm-dev libegl-dev libglx-dev libosmesa6-dev ocl-icd-opencl-dev libnm-dev libpulse-dev libdrm-dev libddcutil-dev libchafa-dev directx-headers-dev rpm
+            cmake -DSET_TWEAK=Off -DBUILD_TESTS=On -DCMAKE_INSTALL_PREFIX=/usr .
+            cmake --build . --target package --verbose -j4
+            ./fastfetch --list-features
+            time ./fastfetch -c presets/ci.jsonc
+            time ./fastfetch -c presets/ci.jsonc --format json
+            time ./flashfetch
+            ldd fastfetch
+            ctest
+
+      - name: upload artifacts
+        uses: actions/upload-artifact@v4
+        with:
+          name: fastfetch-linux-aarch64
+          path: ./fastfetch-*.*
+
+  linux-armv7:
+    name: Linux-armv7
+    runs-on: ubuntu-22.04
+    permissions:
+      security-events: write
+      contents: read
+    steps:
+      - name: checkout repository
+        uses: actions/checkout@v4
+
+      - name: run VM
+        uses: uraimo/run-on-arch-action@v2
+        id: runcmd
+        with:
+          arch: armv7
+          distro: ubuntu20.04
+          githubToken: ${{ github.token }}
+          run: |
+            uname -a
+            apt-get update && apt-get install -y wget
+            # CMake installed by apt has bug `list sub-command REMOVE_ITEM requires two or more arguments`
+            wget --no-check-certificate https://apt.kitware.com/ubuntu/pool/main/c/cmake/{cmake_3.29.2-0kitware1ubuntu20.04.1_armhf.deb,cmake-data_3.29.2-0kitware1ubuntu20.04.1_all.deb}
+            dpkg -i *.deb
+            apt-get install -y make g++ libvulkan-dev libwayland-dev libxrandr-dev libxcb-randr0-dev libdconf-dev libdbus-1-dev libmagickcore-dev libxfconf-0-dev libsqlite3-dev librpm-dev libegl-dev libglx-dev libosmesa6-dev ocl-icd-opencl-dev libnm-dev libpulse-dev libdrm-dev directx-headers-dev rpm
+            cmake -DSET_TWEAK=Off -DBUILD_TESTS=On -DCMAKE_INSTALL_PREFIX=/usr .
+            cmake --build . --target package --verbose -j4
+            ./fastfetch --list-features
+            time ./fastfetch -c presets/ci.jsonc
+            time ./fastfetch -c presets/ci.jsonc --format json
+            time ./flashfetch
+            ldd fastfetch
+            ctest
+
+      - name: upload artifacts
+        uses: actions/upload-artifact@v4
+        with:
+          name: fastfetch-linux-armv7
+          path: ./fastfetch-*.*
+
+  musl-amd64:
+    name: Musl-amd64
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: setup alpine linux
+        uses: jirutka/setup-alpine@master
+        with:
+          branch: v3.19
+
+      - name: install dependencies
+        run: |
+          cat /etc/alpine-release
+          uname -a
+          apk add cmake samurai vulkan-loader-dev libxcb-dev wayland-dev libdrm-dev dconf-dev imagemagick-dev chafa-dev zlib-dev dbus-dev mesa-dev opencl-dev xfconf-dev sqlite-dev networkmanager-dev pulseaudio-dev ddcutil-dev gcc g++
+        shell: alpine.sh --root {0}
+
+      - name: build
+        run: |
+            cmake -DSET_TWEAK=Off -DBUILD_TESTS=On -DCMAKE_INSTALL_PREFIX=/usr -DIS_MUSL=ON -GNinja .
+            cmake --build . --target package --verbose -j4
+        shell: alpine.sh {0}
+
+      - name: run
+        run: |
+            ./fastfetch --list-features
+            time ./fastfetch -c presets/ci.jsonc
+            time ./fastfetch -c presets/ci.jsonc --format json
+            time ./flashfetch
+            ldd fastfetch
+            ctest
+        shell: alpine.sh {0}
+
+      - name: upload artifacts
+        uses: actions/upload-artifact@v4
+        with:
+          name: fastfetch-musl-amd64
+          path: ./fastfetch-*.*
+
+  musl-aarch64:
+    name: Musl-aarch64
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: setup alpine linux
+        uses: jirutka/setup-alpine@master
+        with:
+          branch: v3.19
+          arch: aarch64
+
+      - name: install dependencies
+        run: |
+          cat /etc/alpine-release
+          uname -a
+          apk add cmake samurai vulkan-loader-dev libxcb-dev wayland-dev libdrm-dev dconf-dev imagemagick-dev chafa-dev zlib-dev dbus-dev mesa-dev opencl-dev xfconf-dev sqlite-dev networkmanager-dev pulseaudio-dev ddcutil-dev gcc g++
+        shell: alpine.sh --root {0}
+
+      - name: build
+        run: |
+            cmake -DSET_TWEAK=Off -DBUILD_TESTS=On -DCMAKE_INSTALL_PREFIX=/usr -DIS_MUSL=ON -GNinja .
+            cmake --build . --target package --verbose -j4
+        shell: alpine.sh {0}
+
+      - name: run
+        run: |
+            ./fastfetch --list-features
+            time ./fastfetch -c presets/ci.jsonc
+            time ./fastfetch -c presets/ci.jsonc --format json
+            time ./flashfetch
+            ldd fastfetch
+            ctest
+        shell: alpine.sh {0}
+
+      - name: upload artifacts
+        uses: actions/upload-artifact@v4
+        with:
+          name: fastfetch-musl-aarch64
+          path: ./fastfetch-*.*
+
+  macos-universal:
+    name: macOS-universal
+    runs-on: macos-12
     permissions:
       security-events: write
       contents: read
@@ -152,11 +293,10 @@ jobs:
 
       - name: install required packages
         run: |
-          brew update
-          HOMEBREW_NO_INSTALLED_DEPENDENTS_CHECK=1 brew install vulkan-loader vulkan-headers molten-vk imagemagick chafa
+          HOMEBREW_NO_INSTALLED_DEPENDENTS_CHECK=1 brew install --overwrite vulkan-loader vulkan-headers molten-vk imagemagick chafa
 
       - name: Initialize CodeQL
-        uses: github/codeql-action/init@v2
+        uses: github/codeql-action/init@v3
         with:
           languages: c
 
@@ -164,10 +304,10 @@ jobs:
         run: cmake -DSET_TWEAK=Off -DBUILD_TESTS=On -DCMAKE_OSX_ARCHITECTURES='arm64;x86_64' .
 
       - name: build project
-        run: cmake --build . --target package --verbose
+        run: cmake --build . --target package --verbose -j4
 
       - name: perform CodeQL analysis
-        uses: github/codeql-action/analyze@v2
+        uses: github/codeql-action/analyze@v3
 
       - name: list features
         run: ./fastfetch --list-features
@@ -190,12 +330,12 @@ jobs:
       - name: upload artifacts
         uses: actions/upload-artifact@v4
         with:
-          name: fastfetch-macos
+          name: fastfetch-macos-universal
           path: ./fastfetch-*.*
 
-  freebsd:
-    name: FreeBSD
-    runs-on: macos-12
+  freebsd-amd64:
+    name: FreeBSD-amd64
+    runs-on: ubuntu-latest
     permissions:
       security-events: write
       contents: read
@@ -207,13 +347,16 @@ jobs:
         uses: cross-platform-actions/action@master
         with:
           operating_system: freebsd
+          architecture: x86-64
+          cpu_count: 3
+          shell: bash
           version: '13.2'
           run: |
             uname -a
             sudo pkg update
-            sudo pkg install -y cmake git pkgconf binutils pciutils wayland vulkan-headers vulkan-loader libxcb libXrandr libX11 libdrm glib dconf dbus sqlite3-tcl xfce4-conf ImageMagick6 ImageMagick7 chafa egl libosmesa opencl ocl-icd pulseaudio
+            sudo pkg install -y cmake git pkgconf binutils wayland vulkan-headers vulkan-loader libxcb libXrandr libX11 libdrm glib dconf dbus sqlite3-tcl xfce4-conf ImageMagick6 ImageMagick7 chafa egl libosmesa opencl ocl-icd v4l_compat
             cmake -DSET_TWEAK=Off -DBUILD_TESTS=On .
-            cmake --build . --target package --verbose
+            cmake --build . --target package --verbose -j4
             ./fastfetch --list-features
             time ./fastfetch
             time ./fastfetch --format json
@@ -224,11 +367,48 @@ jobs:
       - name: upload artifacts
         uses: actions/upload-artifact@v4
         with:
-          name: fastfetch-freebsd
+          name: fastfetch-freebsd-amd64
           path: ./fastfetch-*.*
 
-  win64:
-    name: Win64
+  freebsd-aarch64:
+    name: FreeBSD-aarch64
+    runs-on: ubuntu-latest
+    permissions:
+      security-events: write
+      contents: read
+    steps:
+      - name: checkout repository
+        uses: actions/checkout@v4
+
+      - name: run VM
+        uses: cross-platform-actions/action@master
+        with:
+          operating_system: freebsd
+          architecture: arm64
+          cpu_count: 3
+          shell: bash
+          version: '13.2'
+          run: |
+            uname -a
+            sudo pkg update
+            sudo pkg install -y cmake git pkgconf binutils wayland vulkan-headers vulkan-loader libxcb libXrandr libX11 libdrm glib dconf dbus sqlite3-tcl xfce4-conf ImageMagick6 ImageMagick7 chafa egl libosmesa opencl ocl-icd v4l_compat
+            cmake -DSET_TWEAK=Off -DBUILD_TESTS=On .
+            cmake --build . --target package --verbose -j4
+            ./fastfetch --list-features
+            time ./fastfetch
+            time ./fastfetch --format json
+            time ./flashfetch
+            ldd fastfetch
+            ctest
+
+      - name: upload artifacts
+        uses: actions/upload-artifact@v4
+        with:
+          name: fastfetch-freebsd-aarch64
+          path: ./fastfetch-*.*
+
+  windows-amd64:
+    name: Windows-amd64
     runs-on: windows-latest
     permissions:
       security-events: write
@@ -245,7 +425,7 @@ jobs:
         with:
           msystem: CLANG64
           update: true
-          install: git mingw-w64-clang-x86_64-7zip mingw-w64-clang-x86_64-cmake mingw-w64-clang-x86_64-clang mingw-w64-clang-x86_64-vulkan-loader mingw-w64-clang-x86_64-opencl-icd
+          install: git mingw-w64-clang-x86_64-7zip mingw-w64-clang-x86_64-cmake mingw-w64-clang-x86_64-clang mingw-w64-clang-x86_64-vulkan-loader mingw-w64-clang-x86_64-vulkan-headers mingw-w64-clang-x86_64-opencl-icd
 
       - name: print msys version
         run: uname -a
@@ -254,7 +434,7 @@ jobs:
         run: env PKG_CONFIG_PATH=/clang64/lib/pkgconfig/:$PKG_CONFIG_PATH cmake -DSET_TWEAK=Off -DBUILD_TESTS=On .
 
       - name: build project
-        run: cmake --build . --verbose
+        run: cmake --build . --verbose -j4
 
       - name: copy necessary dlls
         run: cp /clang64/bin/{OpenCL,vulkan-1}.dll .
@@ -278,19 +458,19 @@ jobs:
         run: ctest
 
       - name: create zip archive
-        run: 7z a -tzip -mx9 -bd -y fastfetch-$(./fastfetch --version-raw)-Win64.zip *.dll fastfetch.exe flashfetch.exe presets
+        run: 7z a -tzip -mx9 -bd -y fastfetch-windows-amd64.zip *.dll fastfetch.exe flashfetch.exe presets
 
       - name: create 7z archive
-        run: 7z a -t7z -mx9 -bd -y fastfetch-$(./fastfetch --version-raw)-Win64.7z *.dll fastfetch.exe flashfetch.exe presets
+        run: 7z a -t7z -mx9 -bd -y fastfetch-windows-amd64.7z *.dll fastfetch.exe flashfetch.exe presets
 
       - name: upload artifacts
         uses: actions/upload-artifact@v4
         with:
-          name: fastfetch-win64
-          path: ./fastfetch-*-Win64.*
+          name: fastfetch-windows-amd64
+          path: ./fastfetch-windows-amd64.*
 
-  win32:
-    name: Win32
+  windows-i686:
+    name: Windows-i686
     runs-on: windows-latest
     permissions:
       security-events: write
@@ -307,13 +487,13 @@ jobs:
         with:
           msystem: CLANG32
           update: true
-          install: git mingw-w64-clang-i686-7zip mingw-w64-clang-i686-cmake mingw-w64-clang-i686-clang mingw-w64-clang-i686-vulkan-loader mingw-w64-clang-i686-opencl-icd
+          install: git p7zip mingw-w64-clang-i686-cmake mingw-w64-clang-i686-clang mingw-w64-clang-i686-vulkan-loader mingw-w64-clang-i686-vulkan-headers mingw-w64-clang-i686-opencl-icd
 
       - name: print msys version
         run: uname -a
 
       - name: Initialize CodeQL
-        uses: github/codeql-action/init@v2
+        uses: github/codeql-action/init@v3
         with:
           languages: c, cpp
 
@@ -321,10 +501,10 @@ jobs:
         run: env PKG_CONFIG_PATH=/clang32/lib/pkgconfig/:$PKG_CONFIG_PATH cmake -DSET_TWEAK=Off -DBUILD_TESTS=On .
 
       - name: build project
-        run: cmake --build . --verbose
+        run: cmake --build . --verbose -j4
 
       - name: perform CodeQL analysis
-        uses: github/codeql-action/analyze@v2
+        uses: github/codeql-action/analyze@v3
 
       - name: copy necessary dlls
         run: cp /clang32/bin/{OpenCL,vulkan-1}.dll .
@@ -345,27 +525,32 @@ jobs:
         run: ctest
 
       - name: create zip archive
-        run: 7z a -tzip -mx9 -bd -y fastfetch-$(./fastfetch --version-raw)-Win32.zip *.dll fastfetch.exe flashfetch.exe presets
+        run: 7z a -tzip -mx9 -bd -y fastfetch-windows-i686.zip *.dll fastfetch.exe flashfetch.exe presets
 
       - name: create 7z archive
-        run: 7z a -t7z -mx9 -bd -y fastfetch-$(./fastfetch --version-raw)-Win32.7z *.dll fastfetch.exe flashfetch.exe presets
+        run: 7z a -t7z -mx9 -bd -y fastfetch-windows-i686.7z *.dll fastfetch.exe flashfetch.exe presets
 
       - name: upload artifacts
         uses: actions/upload-artifact@v4
         with:
-          name: fastfetch-win32
-          path: ./fastfetch-*-Win32.*
+          name: fastfetch-windows-i686
+          path: ./fastfetch-windows-i686.*
 
   release:
     if: github.event_name == 'push' && github.ref == 'refs/heads/master' && github.repository == 'fastfetch-cli/fastfetch'
     name: Release
     runs-on: ubuntu-latest
     needs:
-      - linux
-      - macos
-      - freebsd
-      - win64
-      - win32
+      - linux-amd64
+      - linux-aarch64
+      - linux-armv7
+      - musl-amd64
+      - musl-aarch64
+      - macos-universal
+      - freebsd-amd64
+      - freebsd-aarch64
+      - windows-amd64
+      - windows-i686
     permissions:
       contents: write
     steps:
@@ -376,38 +561,41 @@ jobs:
           repository: ${{ github.repository }}
 
       - name: download artifacts
-        if: needs.linux.outputs.ffversion != steps.get_version_release.outputs.release
+        if: needs.linux-amd64.outputs.ffversion != steps.get_version_release.outputs.release
         uses: actions/download-artifact@v4
 
       - name: create release
-        if: needs.linux.outputs.ffversion != steps.get_version_release.outputs.release
+        if: needs.linux-amd64.outputs.ffversion != steps.get_version_release.outputs.release
         uses: ncipollo/release-action@v1
         with:
-          tag: ${{ needs.linux.outputs.ffversion }}
+          tag: ${{ needs.linux-amd64.outputs.ffversion }}
           commit: ${{ github.sha }}
           artifactErrorsFailBuild: true
           artifacts: fastfetch-*/fastfetch-*
-          body: "Please refer to [CHANGELOG.md](https://github.com/${{ github.repository }}/blob/${{ needs.linux.outputs.ffversion }}/CHANGELOG.md) for details."
+          body: "Please refer to [CHANGELOG.md](https://github.com/${{ github.repository }}/blob/${{ needs.linux-amd64.outputs.ffversion }}/CHANGELOG.md) for details."
 
       - name: download source tarballs
-        if: needs.linux.outputs.ffversion != steps.get_version_release.outputs.release
+        if: needs.linux-amd64.outputs.ffversion != steps.get_version_release.outputs.release
         run: |
-          for i in 1 2 3 4 5; do curl -L --remote-name-all --output-dir fastfetch-source --create-dirs https://github.com/${{ github.repository }}/archive/refs/tags/${{ needs.linux.outputs.ffversion }}.{tar.gz,zip} && break || sleep 5; done
+          for i in 1 2 3 4 5; do curl -L --remote-name-all --output-dir fastfetch-source --create-dirs https://github.com/${{ github.repository }}/archive/refs/tags/${{ needs.linux-amd64.outputs.ffversion }}.{tar.gz,zip} && break || sleep 5; done
           ls fastfetch-*/*
 
       - name: generate release notes
-        if: needs.linux.outputs.ffversion != steps.get_version_release.outputs.release
+        if: needs.linux-amd64.outputs.ffversion != steps.get_version_release.outputs.release
         run: |
-          echo "Please refer to [CHANGELOG.md](https://github.com/${{ github.repository }}/blob/${{ needs.linux.outputs.ffversion }}/CHANGELOG.md) for details." > fastfetch-release-notes.md
+          echo "Please refer to [CHANGELOG.md](https://github.com/${{ github.repository }}/blob/${{ needs.linux-amd64.outputs.ffversion }}/CHANGELOG.md) for details." > fastfetch-release-notes.md
           echo -e "\n---\n\n<details><summary>SHA256SUMs</summary><br>\n\n\`\`\`" >> fastfetch-release-notes.md
           sha256sum fastfetch-*/* >> fastfetch-release-notes.md
           echo -e "\`\`\`\n</details>" >> fastfetch-release-notes.md
+          echo -e "\n<details><summary>SHA512SUMs</summary><br>\n\n\`\`\`" >> fastfetch-release-notes.md
+          sha512sum fastfetch-*/* >> fastfetch-release-notes.md
+          echo -e "\`\`\`\n</details>" >> fastfetch-release-notes.md
 
       - name: update release body
-        if: needs.linux.outputs.ffversion != steps.get_version_release.outputs.release
+        if: needs.linux-amd64.outputs.ffversion != steps.get_version_release.outputs.release
         uses: ncipollo/release-action@v1
         with:
-          tag: ${{ needs.linux.outputs.ffversion }}
+          tag: ${{ needs.linux-amd64.outputs.ffversion }}
           commit: ${{ github.sha }}
           bodyFile: fastfetch-release-notes.md
           allowUpdates: true

.gitignore

@@ -1,9 +1,9 @@
-**/build/
-**/.vscode/
-**/.cache/
-**/.kdev4/
-**/.DS_Store
-/.vs
+build/
+.vs/
+.vscode/
+.cache/
+.kdev4/
+.DS_Store
 cscope.*
 tags
 fastfetch.kdev4

CHANGELOG.md

@@ -1,3 +1,434 @@
+# 2.13.2
+
+Another hotfix release :(
+
+Bugfixes:
+* Remove DRM driver version detection feature, which caused a performance regression for nouveau drivers (#956, Display, Linux)
+* Fix compatibility for old python versions. Regression of `2.13.0`
+* Don't use `*-unknown` as display name for Wayland protocol (Display, Linux)
+
+Features:
+* Add new module `Editor` which prints information of the default editor, i.e. $VISUAL or $EDITOR (#430, Editor)
+
+Logos:
+* Added CuerdOS
+* Remove special handling of Loc-OS
+
+# 2.13.1
+
+Fix a regression introduced in v2.13.0
+
+Bugfixes:
+* Fix CPU frequency not displayed if `bios_limit` is not available (CPU, Linux)
+
+Features:
+* Add `--cpu-show-pe-core-count` to detect and display core count for performance / efficiency cores (CPU, FreeBSD)
+
+# 2.13.0
+
+Changes:
+* Option `--gpu-force-vulkan <?bool>` has been changed to `--gpu-detection-method <enum>`
+    * Use `--gpu-detection-method vulkan` to get the old behavior
+    * See `fastfetch -h gpu-detection-method` for detail
+* In Linux, BIOS limited CPU frequency is printed by default to match the behavior of neofetch (CPU, Linux, #947)
+
+Features:
+* Add new module `Bootmgr` which prints information of stage 2 bootloader (grub, system-boot, etc)
+    * Requires root permission to work on Windows and FreeBSD
+    * Requires booting in UEFI mode
+* Add package manager lpkg and lpkg-build support (Packages, Linux)
+* Improve macOS 10.13 compatibility (macOS)
+* Detect core count for performance / efficiency cores (CPU)
+    * Test it with `fastfetch -s cpu --cpu-format '{9}'`
+* Support min / max frequency and physical core count detection in FreeBSD, if kernel supports it (CPU, FreeBSD)
+* Detect DRM driver version if DRM detection method is used (GPU, Linux)
+
+Bugfixes:
+* Don't detect `clifm` and `valgrind` as a terminal (Terminal, Linux)
+* Improve stability (PhysicalMemory, FreeBSD)
+* Fix bssid & status detection (Wifi, FreeBSD)
+* Ensure createTime is correctly initialized (Disk, FreeBSD / macOS)
+* Fix `--cpu-freq-ndigits` not working if `--cpu-format` is used
+* Fix `nix-user` package count detection (Packages, Linux)
+* Fix some memory leaks
+
+Logos:
+* Fix Manjaro logo not displayed
+* Add SpoinkOS
+* Add Loc-OS
+* Add Furreto Linux
+* Fix TorizonCore logo colors
+* Fix KDE neon logo not displayed
+
+# 2.12.0
+
+Changes:
+* The long deprecated flag based config files are removed.
+    * They can still be used with `xargs fastfetch < /path/to/config.conf`
+    * `--gen-config` can be used to migrate them to json based config files
+* The long deprecated options `--set` and `--set-keyless` are removed.
+* `Kernel` module now prints kernel name by default
+
+Features:
+* Support `st` terminal font detection for font configuration compiled in `st` binary (TerminalFont, Linux)
+* Add option `--color-output` to change output color of all modules except `Title`, `Separator`
+    * `display.color.output` in JSONC config file
+* Add option `--<module>-output-color` to change output color of one specified module, which overrides the global option `--color-output`
+* Add option `--publicip-ipv6` to print IPv6 address (PublicIP)
+* Add new module `Loadavg` to print load averages (Loadavg)
+* Add new module `PhysicalMemory` to print information of physical memory devices (PhysicalMemory)
+    * Requires root permission to work on Linux and FreeBSD
+* Support specifying `--logo-width` only for `--kitty-direct` and `--iterm` (Logo)
+* Add option `--localip-show-all-ips` to show all IPs assigned to the same interface (LocalIP)
+    * Default to `false`
+* Improve compatibility with `(*term)` (#909, Terminal, macOS)
+* Support GPU core count and frequency detection for Asahi Linux (GPU, Linux)
+
+Bugfixes:
+* Rename option `--temperature-unit` to `--temp-unit` as documented in help messages
+* Fix alternate logo doesn't work with `{ "type": "builtin" }` (#914, Logo)
+
+Logos:
+* Fix DahliaOS detection
+* Add openSUSE Slowroll
+* Add macOS3
+* Add Quirinux
+
+# 2.11.5
+
+Bugfix:
+* Fix logo printing for OpenMandriva (#896)
+* Remove `--os-file` in help messages
+
+# 2.11.4
+
+Changes:
+* Fastfetch will print a colorless ascii logo in `--pipe` mode for better `lolcat` compatibility. `fastfetch | lolcat` should work and no `--pipe false` needed.
+    * Previously the logo would be disabled in `--pipe` mode.
+    * Use `--pipe -l none` to get the old beheavior
+* `--os-file` was removed and CMake option `-DCUSTOM_OS_RELEASE_PATH=/path/to/os-release` was introduced for configuring at compile time by package managers if needed. This option should not used in most cases.
+
+Bugfixes:
+* Fix possible out-of-bound memory access (#868)
+* Fix Apple Terminal detection (#878, macOS, Terminal)
+* Fix deprecation warning for macOS 14.0 hopefully (#860, macOS, Camera)
+* Fix memory leaks when passing informative options (#888)
+* Fix JSON config `size.ndigits` doesn't work 
+
+Features:
+* Enable `--pipe` mode if environment variable `$NO_COLOR` is set
+* Support Armbian and Proxmox distro detection (OS, Linux)
+
+Logo:
+* Add Armbian
+
+# 2.11.3
+
+Hotfix for nix (https://github.com/NixOS/nixpkgs/issues/308849#issuecomment-2093962376)
+
+Features:
+* Add cmake option `CUSTOM_AMDGPU_IDS_PATH` for specifying custom path of `amdgpu.ids`
+
+Bugfixes:
+* Fix hanging when detecting disconnected network drive (Disk, Windows)
+* Ensure line ending is printed when printing image logo errors (Logo)
+* Revert image logo limitation change in 2.11.2; allow image logo in SSH session and tmux again (#861, Logo)
+* Fix doubled output in custom formation (PhysicalDisk, Windows)
+
+# 2.11.2
+
+Hotfix for Debian 11
+
+Changes:
+* Error messages when trying to print image logo will only be printed with `--show-errors`
+* When generating JSON output, fastfetch will generate an empty array when no result is detected, instead of an error.
+
+Bugfixes:
+* Fix segfault in Debian 11 and some old kernels. Regression introduced in 2.11.0 (#845, GPU, Linux)
+* Don't try detecting version of raw `sh` shell (#849, Shell, Linux)
+* Trim `\r` on Windows
+
+Features:
+* Check xdg state home for nix user packages (#837, Packages, Linux)
+* Disable image logos in ssh and tmux sessions (#839)
+* Support MX Linux distro detection (#847, OS, Linux)
+
+Logo:
+* Add KernelOS
+* Fix name of DraugerOS
+* Add missing `FF_LOGO_LINE_TYPE_SMALL_BIT` flags
+* Add MX2
+
+# 2.11.1
+
+Hotfix for Android
+
+Bugfixes:
+* Fix uninitialized variables which can cause crashes (#760 #838, Battery, Android)
+* Don't detect hyfetch as shell when used as backend of [hyfetch](https://github.com/hykilpikonna/hyfetch)
+* Fix incorrect information in man page (#828)
+
+Features:
+* Support sorcery package manager detection (Packages, Linux)
+* Make `--custom-format` optional (Custom)
+* Make `/` an alias of `C:\` for `--disk-folders` (Disk, Windows)
+* Build for Linux armv7
+
+Logo:
+* Fix colors of Source Mage logo
+
+# 2.11.0
+
+Changes:
+* Default `hideCursor` to false. It doesn't make much difference but makes user's terminal unusable if fastfetch is not exited correctly.
+* Linux amd64 binaries are built with Ubuntu 20.04 again (#808)
+
+Bugfixes:
+* Fix swap usage detection in x86-32 build (Windows, Swap)
+* Fix minimum cmake version support (#810)
+* Fix wifi detection on platforms that don't use NetworkManager (#811, Wifi, Linux)
+* Fix NixOS wrapped process name (#814, Terminal, Linux)
+* Fix GPU type detection for AMD cards (#816, GPU, Linux)
+* Silence system deprecation warnings (#822, Camera, macOS)
+
+Features:
+* Add basic support DE detection support for UKUI (DE, Linux)
+* Support printing total number of nix / flatpak / brew packages (Packages)
+    * See `fastfetch -h packages-format` for detail
+* Better max CPU frequency detection support with `CPUID / 16H` instruction (CPU, Windows)
+    * This requires Intel Core I Gen 6 or newer, and with `Virtual Machine Platform` Windows feature disabled. X86 only.
+* Improve performance of nix packages detection (Packages, Linux)
+* Make config specified in JSONC overridable by command line flags
+    * Note this change only make global config overridable; module configs are still not
+* Suggest increasing `--processing-timeout` when child process timeouts
+* Only detect folders that specified by `--disk-folders`
+    * Previously `--disk-folders` only omits unmatched disks from output
+    * This option can be used to improve detection performance by ignoring slow network drives
+
+# 2.10.2
+
+Bugfixes:
+* Fix a regression that detect x11 as wayland (#805, WM, Linux)
+
+# 2.10.1
+
+Bugfixes:
+* Fix build with `-DENABLE_DBUS=OFF` (Linux)
+
+# 2.10.0
+
+Changes:
+* We now always detect max frequency of GPUs for consistent, instead of current frequency
+
+Features:
+* Improve display detection for wlroots based WMs. Fastfetch now correctly reports fractional scale factors in hyprland (Display, Linux)
+* Improve GPU detection on Linux (GPU, Linux)
+    * Support GPU memory usage detection for AMD GPUs
+    * Support GPU frequency detection for Intel GPUs
+* Improve performance of Gnome version detection (DE, Linux)
+* Improve performance of kitty version detection (Terminal, Linux)
+* Detect refresh rate when using `--ds-force-drm sysfs-only` (Display, Linux)
+* Add option `--ts-version` to disable terminal and shell version detection. Mainly for benchmarking purposes
+* Improve performance of detecting WSL version (Host, Linux)
+
+Bugfixes:
+* Correctly detect `/bin/sh` as current shell if it's used as default shell (#798, Shell, Linux)
+* Work around an issue which CPU module reports incorrect CPU frequency that is too high (#800, CPU, Linux)
+* Don't print ANSI escape codes in `--pipe` mode
+
+# 2.9.2
+
+Changes:
+* To make use of the newly introduced `yyjson` flag `YYJSON_WRITE_NEWLINE_AT_END`, fastfetch now requires `yyjson` 0.9.0 or later
+
+Features:
+* Always add a final new-line when generating JSON output
+* Detect partition create time, which can be used as OS installation time (Disk)
+* Print time string when generating JSON result instead of UNIX epoch time number, which is more human-readable
+
+Bugfixes:
+* Fix a memory leak
+* Better portable mode detection of Windows Terminal (TerminalFont, Windows)
+* Fix parsing of option `--packages-disabled` (Packages)
+* Don't use command `time` as a shell (Shell)
+
+Logos:
+* Add openSUSE MicroOS
+* Fix color of AOSC OS
+
+# 2.9.1
+
+Features:
+* Support weston-terminal (missed commit in v2.9.0) (TerminalFont, Linux)
+* Support hyprcursor detection (#776, Cursor, Linux)
+
+Bugfixes:
+* Fix `fastfetch --gen-config` raises SIGSEGV when `~/.config/fastfetch` doesn't exist. Regression of `2.9.0` (#778)
+
+# 2.9.0
+
+Features:
+* Support Lxterminal version detection (Terminal, Linux)
+* Support weston-terminal version detection (Terminal, Linux)
+* Support `am` package manager detection (#771, Packages, Linux)
+* Support network prefix length detection for IPv6 (LocalIP)
+* Display all IPs when multiple IPs are assigned to the same interface (LocalIP)
+* Add option `--localip-show-prefix-len` to show network prefix length for both IPv4 and IPv6. Defaults to `true` (LocalIP)
+
+Bugfixes:
+* Fix network prefix length detection when the value is greater than 24 (#773, LocalIP, Linux)
+* For xfce4-terminal, use system mono font if no config file is found (TerminalFont, Linux)
+
+# 2.8.10
+
+Bugfixes:
+* Don't display 0.00 GHz (CPU, FreeBSD)
+* Don't detect manufactor of Qualcomm as ARM (CPU, Android)
+* Ignore `chezmoi` (Terminal, Linux)
+* Trim trailing possible whitespaces (PublicIP)
+* Fix detection compatibility for KDE 6 (Font, Linux)
+* Always use Metal API to detect vmem size (GPU, macOS)
+
+Features:
+* Improve stability; print more useful error message; avoid misuse (PublicIP / Weather)
+* Use MS-DOS device name as mountFrom result, instead of useless GUID volume name (Windows, Disk)
+* Some adjustments to Terminal detection (Terminal, Windows)
+    * Don't pretty print CMD
+    * Print conhost as Windows Console
+    * Don't detect `wininit` as Terminal
+
+Logo:
+* Fix color of Arco Linux
+
+# 2.8.9
+
+Bugfixes:
+* Don't detect `SessionLeader` as terminal, actually (Terminal, Linux)
+* Fix blurry chafa result when specifying both width and height (#757, Logo)
+
+Features:
+* Support new MacBook Air (Host, macOS)
+* Distinguish min frequency and base frequency (CPU)
+
+Logo:
+* Fix proxmox
+
+# 2.8.8
+
+Bugfixes:
+* Fix old fish version compatibility (#744)
+* Fix truncated texts in `--help format` (#745)
+* Fix old vulkan-header and libdrm library compatibility (#748, Linux)
+* Fix possible segfaults in `--help *-format` (#749)
+* Fix invalid resolution detection when using libdrm (Linux, Display)
+* Fix segfault when `/sys/devices/system/cpu/cpufreq/` doesn't exist (#750, CPU, Linux)
+* Don't detect `SessionLeader` as terminal (Terminal, Linux)
+* Fix detection of client IP (Users, Linux)
+
+# 2.8.7
+
+Bugfixes:
+* Fix max CPU frequency detection for some cases (CPU, Linux)
+* Fix some memory leaks
+* Fix ddcutil 2.1 compatibility (Brightness, Linux)
+* Workaround `permission denied` error when reading `/proc/uptime` (Uptime, Android)
+
+Features:
+* Support zellij version detection (Linux, Terminal)
+
+Logo:
+* Fix PostMarketOS
+
+# 2.8.6
+
+Changes:
+* Due to newly introduced configs, JSONC option `{ "temperatureUnit": "C" }` has been changed to `{ "temp": { "unit": "C" } }`
+
+Bugfixes:
+* Fix incorrect GPU name detection for Intel iGPU on Linux (#736, GPU, Linux)
+
+Features:
+* Support additional temperature formatting options (#737)
+    * `{ "temp": { "ndigits": 1 } }`
+    * `{ "temp": { "color": { "green": "green", "yellow": "yellow", "red": "red" } } }`
+* Support specifying custom `pci.ids` path for Linux (GPU, Linux)
+* Support warp-linux terminal version & terminal font detection (Terminal, Linux)
+
+# 2.8.5
+
+Bugfixes:
+* Fix uninitialized variables
+
+# 2.8.4
+
+Bugfixes:
+* Fix segfault if we fail to find `Vendor ID` in `lscpu` (#718, CPU, Linux)
+* Fix multi-device bcachefs filesystem compatibility (#731, Disk, Linux)
+
+Features:
+* Support portable Windows Terminal settings (#720, Terminal, Windows)
+* Support `--color-block-width` and `--color-block-range` (#721, Colors)
+* Support `--diskio-detect-total` to show total bytes read/written (DiskIO)
+* Support `--netio-detect-total` to show total bytes received/sent (NetIO)
+* Support `--packages-disabled` to disable specified package manager (#729, Packages)
+* Support `--display-order` to sort multiple displays in a specific order (Display)
+* Support `--display-compact-type original-with-refresh-rate` to show refresh rates in compact (oneline) mode (Display)
+
+# 2.8.3
+
+Bugfixes:
+* Fix GPU name detection for AMD graphic cards (GPU, Linux / FreeBSD)
+
+# 2.8.2
+
+Changes:
+* The linux binaries are now built with glibc 2.35, which means they no longer support Debian 11 and Ubuntu 20.04. Users using these distros may download the artifacts `fastfetch-linux-old` from GitHub Actions.
+
+Features:
+* Rewrite GPU module, drop libpci dependency (GPU, Linux)
+* Detect marketing name of Apple Silicon CPUs for asahi linux (CPU, Linux)
+* Add new module `Camera`, which prints the name and resolution of connected cameras
+
+Bugfixes:
+* Fix compatibility with packages installed by flatpak (Terminal, Linux)
+* Don't show an empty battery if no battery is detected (macOS, Battery)
+* Don't show `not connected` if no power adapter is found (macOS / Linux, PowerAdapter)
+* Make format of battery status be consistent with other platforms (Linux, Battery)
+
+Logo:
+* Print Asahi logo in asahi linux (Logo, Linux)
+* Add Asahi2, z/OS, Tatra, PikaOS
+
+# 2.7.1
+
+Features:
+* Config presets in app folder now work with symlinks
+
+Bugfixes:
+* Fix a possible segfault when detecting terminal (Terminal, Linux)
+
+# 2.7.0
+
+Features:
+* Add new module `TerminalTheme`, which prints the foreground and background color of the current terminal window. Currently doesn't work on Windows.
+* Allow command substitution when expanding paths. For example, now it's possible to use `"source": "$(ls ~/path/to/images/*.png | shuf -n 1)"` in JSONC config file to randomly choose an image to display. (#698)
+* Use native methods instead of pciutils to detect GPUs in FreeBSD. (GPU, FreeBSD)
+
+Bugfixes:
+* Fix text formatting (Wifi, Linux)
+* Fix terminal detection in some cases (Terminal)
+* Remove trailing `\0` in JSON results (FreeBSD)
+* Fix uninitialized variables (GPU, Linux)
+* Fix a possible segfault (OpenCL)
+
+Logo:
+* Add ASCII logos for fedora immutable variants (#700)
+
+# 2.6.3
+
+Bugfixes:
+* Fix module not working (Bluetooth)
+
 # 2.6.2
 
 Bugfixes:

CMakeLists.txt

@@ -1,7 +1,7 @@
 cmake_minimum_required(VERSION 3.12.0) # target_link_libraries with OBJECT libs & project homepage url
 
 project(fastfetch
-    VERSION 2.6.2
+    VERSION 2.13.2
     LANGUAGES C
     DESCRIPTION "Fast neofetch-like system information tool"
     HOMEPAGE_URL "https://github.com/fastfetch-cli/fastfetch"
@@ -42,7 +42,6 @@ include(CheckIncludeFile)
 
 include(CMakeDependentOption)
 
-cmake_dependent_option(ENABLE_LIBPCI "Enable libpci" ON "LINUX OR BSD" OFF)
 cmake_dependent_option(ENABLE_VULKAN "Enable vulkan" ON "LINUX OR APPLE OR BSD OR WIN32 OR ANDROID" OFF)
 cmake_dependent_option(ENABLE_WAYLAND "Enable wayland-client" ON "LINUX OR BSD" OFF)
 cmake_dependent_option(ENABLE_XCB_RANDR "Enable xcb-randr" ON "LINUX OR BSD" OFF)
@@ -70,13 +69,19 @@ cmake_dependent_option(ENABLE_PULSE "Enable pulse" ON "LINUX" OFF)
 cmake_dependent_option(ENABLE_DDCUTIL "Enable ddcutil" ON "LINUX" OFF)
 cmake_dependent_option(ENABLE_DIRECTX_HEADERS "Enable DirectX headers for WSL" ON "LINUX" OFF)
 cmake_dependent_option(ENABLE_THREADS "Enable multithreading" ON "Threads_FOUND" OFF)
-cmake_dependent_option(ENABLE_PCI_MEMORY "Enable detecting GPU memory size with libpci" OFF "LINUX OR BSD" OFF)
 
 option(ENABLE_SYSTEM_YYJSON "Use system provided (instead of fastfetch embedded) yyjson library" OFF)
 option(ENABLE_ASAN "Build fastfetch with ASAN (address sanitizer)" OFF)
 option(ENABLE_PROPRIETARY_GPU_DRIVER_API "Enable proprietary GPU driver API (NVML, IGCL and AGS)" ON)
 option(BUILD_TESTS "Build tests" OFF) # Also create test executables
 option(SET_TWEAK "Add tweak to project version" ON) # This is set to off by github actions for release builds
+option(IS_MUSL "Build with musl libc" OFF) # Used by Github Actions
+
+if (LINUX)
+    set(CUSTOM_PCI_IDS_PATH "" CACHE STRING "Custom path to file pci.ids, defaults to `/usr/share/hwdata/pci.ids`")
+    set(CUSTOM_AMDGPU_IDS_PATH "" CACHE STRING "Custom path to file amdgpu.ids, defaults to `/usr/share/libdrm/amdgpu.ids`")
+    set(CUSTOM_OS_RELEASE_PATH "" CACHE STRING "Custom path to file os-release, defaults to `/etc/os-release`")
+endif()
 
 ####################
 # Compiler options #
@@ -110,7 +115,7 @@ endif()
 
 if(WIN32)
     set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,--tsaware -Wl,--build-id -Wl,--subsystem,console:6.1,--major-os-version,6,--minor-os-version,1")
-elseif(APPLE)
+elseif(APPLE AND CMAKE_C_COMPILER_ID MATCHES "Clang")
     set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fobjc-arc")
 endif()
 
@@ -120,7 +125,7 @@ if(ENABLE_ASAN)
     set(FASTFETCH_FLAGS_DEBUG "${FASTFETCH_FLAGS_DEBUG} -fsanitize=address")
 endif()
 set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} ${FASTFETCH_FLAGS_DEBUG}")
-set(CMAKE_EXE_LINKER_FLAGS_DEBUG "${CMAKE_EXE_LINKER_FLAGS_DEBUG} ${FASTFETCH_FLAGS_DEBUG}")
+set(CMAKE_EXE_LINKER_FLAGS_DEBUG "${CMAKE_EXE_LINKER_FLAGS_DEBUG} ${FASTFETCH_FLAGS_DEBUG} -fstack-protector-all -fno-delete-null-pointer-checks")
 if(NOT WIN32)
     set(CMAKE_EXE_LINKER_FLAGS_DEBUG "${CMAKE_EXE_LINKER_FLAGS_DEBUG} -rdynamic")
 endif()
@@ -231,10 +236,9 @@ endif()
 
 fastfetch_encode_c_string("${DATATEXT_JSON_HELP}" DATATEXT_JSON_HELP)
 fastfetch_load_text(src/data/structure.txt DATATEXT_STRUCTURE)
-fastfetch_load_text(src/data/help.txt DATATEXT_HELP)
+fastfetch_load_text(src/data/help_footer.txt DATATEXT_HELP_FOOTER)
 fastfetch_load_text(src/data/help_color.txt DATATEXT_HELP_COLOR)
 fastfetch_load_text(src/data/help_format.txt DATATEXT_HELP_FORMAT)
-fastfetch_load_text(src/data/help_config.txt DATATEXT_HELP_CONFIG)
 
 configure_file(src/fastfetch_config.h.in fastfetch_config.h @ONLY)
 configure_file(src/fastfetch_datatext.h.in fastfetch_datatext.h @ONLY)
@@ -253,7 +257,7 @@ file(GLOB LOGO_FILES "src/logo/ascii/*.txt")
 set(LOGO_BUILTIN_H "#pragma once\n#pragma GCC diagnostic ignored \"-Wtrigraphs\"\n\n")
 foreach(file ${LOGO_FILES})
     fastfetch_load_text("${file}" content)
-    get_filename_component(file "${file}" NAME_WLE)
+    get_filename_component(file "${file}" NAME_WE)
     string(TOUPPER "${file}" file)
     string(REGEX REPLACE "\\$\\{c([0-9]+)\\}" "$\\1" content "${content}")
     set(LOGO_BUILTIN_H "${LOGO_BUILTIN_H}#define FASTFETCH_DATATEXT_LOGO_${file} ${content}\n")
@@ -279,12 +283,15 @@ set(LIBFASTFETCH_SRC
     src/common/printing.c
     src/common/properties.c
     src/common/settings.c
+    src/common/temps.c
+    src/detection/bootmgr/bootmgr.c
     src/detection/chassis/chassis.c
     src/detection/cpu/cpu.c
     src/detection/cpuusage/cpuusage.c
     src/detection/disk/disk.c
     src/detection/diskio/diskio.c
     src/detection/displayserver/displayserver.c
+    src/detection/editor/editor.c
     src/detection/font/font.c
     src/detection/gpu/gpu.c
     src/detection/media/media.c
@@ -292,7 +299,9 @@ set(LIBFASTFETCH_SRC
     src/detection/opencl/opencl.c
     src/detection/os/os.c
     src/detection/packages/packages.c
+    src/detection/physicalmemory/physicalmemory.c
     src/detection/publicip/publicip.c
+    src/detection/terminaltheme/terminaltheme.c
     src/detection/terminalfont/terminalfont.c
     src/detection/terminalshell/terminalshell.c
     src/detection/version/version.c
@@ -307,8 +316,10 @@ set(LIBFASTFETCH_SRC
     src/modules/bios/bios.c
     src/modules/bluetooth/bluetooth.c
     src/modules/board/board.c
+    src/modules/bootmgr/bootmgr.c
     src/modules/brightness/brightness.c
     src/modules/break/break.c
+    src/modules/camera/camera.c
     src/modules/chassis/chassis.c
     src/modules/colors/colors.c
     src/modules/cpu/cpu.c
@@ -320,6 +331,7 @@ set(LIBFASTFETCH_SRC
     src/modules/de/de.c
     src/modules/disk/disk.c
     src/modules/diskio/diskio.c
+    src/modules/editor/editor.c
     src/modules/font/font.c
     src/modules/gpu/gpu.c
     src/modules/host/host.c
@@ -327,6 +339,7 @@ set(LIBFASTFETCH_SRC
     src/modules/gamepad/gamepad.c
     src/modules/kernel/kernel.c
     src/modules/lm/lm.c
+    src/modules/loadavg/loadavg.c
     src/modules/locale/locale.c
     src/modules/localip/localip.c
     src/modules/memory/memory.c
@@ -337,6 +350,7 @@ set(LIBFASTFETCH_SRC
     src/modules/os/os.c
     src/modules/packages/packages.c
     src/modules/physicaldisk/physicaldisk.c
+    src/modules/physicalmemory/physicalmemory.c
     src/modules/processes/processes.c
     src/modules/player/player.c
     src/modules/poweradapter/poweradapter.c
@@ -348,6 +362,7 @@ set(LIBFASTFETCH_SRC
     src/modules/swap/swap.c
     src/modules/media/media.c
     src/modules/terminal/terminal.c
+    src/modules/terminaltheme/terminaltheme.c
     src/modules/terminalfont/terminalfont.c
     src/modules/terminalsize/terminalsize.c
     src/modules/theme/theme.c
@@ -383,6 +398,7 @@ if(LINUX)
         src/detection/battery/battery_linux.c
         src/detection/bios/bios_linux.c
         src/detection/board/board_linux.c
+        src/detection/bootmgr/bootmgr_linux.c
         src/detection/brightness/brightness_linux.c
         src/detection/chassis/chassis_linux.c
         src/detection/cpu/cpu_linux.c
@@ -391,20 +407,26 @@ if(LINUX)
         src/detection/bluetooth/bluetooth_linux.c
         src/detection/disk/disk_linux.c
         src/detection/physicaldisk/physicaldisk_linux.c
+        src/detection/physicalmemory/physicalmemory_linux.c
         src/detection/diskio/diskio_linux.c
         src/detection/displayserver/linux/displayserver_linux.c
         src/detection/displayserver/linux/drm.c
-        src/detection/displayserver/linux/wayland.c
+        src/detection/displayserver/linux/wayland/wayland.c
+        src/detection/displayserver/linux/wayland/global-output.c
+        src/detection/displayserver/linux/wayland/zwlr-output.c
+        src/detection/displayserver/linux/wayland/wlr-output-management-unstable-v1-protocol.c
         src/detection/displayserver/linux/wmde.c
         src/detection/displayserver/linux/xcb.c
         src/detection/displayserver/linux/xlib.c
         src/detection/font/font_linux.c
         src/detection/gpu/gpu_linux.c
+        src/detection/gpu/gpu_pci.c
         src/detection/gtk_qt/gtk.c
         src/detection/host/host_linux.c
         src/detection/icons/icons_linux.c
         src/detection/libc/libc_linux.c
         src/detection/lm/lm_linux.c
+        src/detection/loadavg/loadavg_linux.c
         src/detection/locale/locale_linux.c
         src/detection/localip/localip_linux.c
         src/detection/gamepad/gamepad_linux.c
@@ -432,6 +454,7 @@ if(LINUX)
         src/detection/wm/wm_nosupport.c
         src/detection/de/de_linux.c
         src/detection/wmtheme/wmtheme_linux.c
+        src/detection/camera/camera_linux.c
         src/util/platform/FFPlatform_unix.c
     )
 elseif(ANDROID)
@@ -444,6 +467,7 @@ elseif(ANDROID)
         src/detection/bios/bios_android.c
         src/detection/bluetooth/bluetooth_nosupport.c
         src/detection/board/board_android.c
+        src/detection/bootmgr/bootmgr_nosupport.c
         src/detection/brightness/brightness_nosupport.c
         src/detection/chassis/chassis_nosupport.c
         src/detection/cpu/cpu_linux.c
@@ -451,6 +475,7 @@ elseif(ANDROID)
         src/detection/cpuusage/cpuusage_linux.c
         src/detection/disk/disk_linux.c
         src/detection/physicaldisk/physicaldisk_linux.c
+        src/detection/physicalmemory/physicalmemory_nosupport.c
         src/detection/diskio/diskio_linux.c
         src/detection/displayserver/displayserver_android.c
         src/detection/font/font_nosupport.c
@@ -459,6 +484,7 @@ elseif(ANDROID)
         src/detection/icons/icons_nosupport.c
         src/detection/libc/libc_android.c
         src/detection/lm/lm_nosupport.c
+        src/detection/loadavg/loadavg_linux.c
         src/detection/locale/locale_linux.c
         src/detection/localip/localip_linux.c
         src/detection/gamepad/gamepad_nosupport.c
@@ -485,6 +511,7 @@ elseif(ANDROID)
         src/detection/wm/wm_nosupport.c
         src/detection/de/de_nosupport.c
         src/detection/wmtheme/wmtheme_nosupport.c
+        src/detection/camera/camera_android.c
         src/util/platform/FFPlatform_unix.c
     )
 elseif(BSD)
@@ -499,6 +526,7 @@ elseif(BSD)
         src/detection/bios/bios_bsd.c
         src/detection/bluetooth/bluetooth_linux.c
         src/detection/board/board_bsd.c
+        src/detection/bootmgr/bootmgr_bsd.c
         src/detection/brightness/brightness_bsd.c
         src/detection/chassis/chassis_bsd.c
         src/detection/cpu/cpu_bsd.c
@@ -506,20 +534,26 @@ elseif(BSD)
         src/detection/cursor/cursor_linux.c
         src/detection/disk/disk_bsd.c
         src/detection/physicaldisk/physicaldisk_bsd.c
+        src/detection/physicalmemory/physicalmemory_linux.c
         src/detection/diskio/diskio_bsd.c
         src/detection/displayserver/linux/displayserver_linux.c
         src/detection/displayserver/linux/drm.c
-        src/detection/displayserver/linux/wayland.c
+        src/detection/displayserver/linux/wayland/wayland.c
+        src/detection/displayserver/linux/wayland/global-output.c
+        src/detection/displayserver/linux/wayland/zwlr-output.c
+        src/detection/displayserver/linux/wayland/wlr-output-management-unstable-v1-protocol.c
         src/detection/displayserver/linux/wmde.c
         src/detection/displayserver/linux/xcb.c
         src/detection/displayserver/linux/xlib.c
         src/detection/font/font_linux.c
-        src/detection/gpu/gpu_linux.c
+        src/detection/gpu/gpu_bsd.c
+        src/detection/gpu/gpu_pci.c
         src/detection/gtk_qt/gtk.c
         src/detection/host/host_bsd.c
         src/detection/lm/lm_linux.c
         src/detection/icons/icons_linux.c
         src/detection/libc/libc_bsd.c
+        src/detection/loadavg/loadavg_bsd.c
         src/detection/locale/locale_linux.c
         src/detection/localip/localip_linux.c
         src/detection/gamepad/gamepad_bsd.c
@@ -547,6 +581,7 @@ elseif(BSD)
         src/detection/wm/wm_nosupport.c
         src/detection/de/de_linux.c
         src/detection/wmtheme/wmtheme_linux.c
+        src/detection/camera/camera_linux.c
         src/util/platform/FFPlatform_unix.c
     )
 elseif(APPLE)
@@ -560,6 +595,7 @@ elseif(APPLE)
         src/detection/bios/bios_apple.c
         src/detection/bluetooth/bluetooth_apple.m
         src/detection/board/board_apple.c
+        src/detection/bootmgr/bootmgr_apple.c
         src/detection/brightness/brightness_apple.c
         src/detection/chassis/chassis_nosupport.c
         src/detection/cpu/cpu_apple.c
@@ -567,14 +603,16 @@ elseif(APPLE)
         src/detection/cursor/cursor_apple.m
         src/detection/disk/disk_bsd.c
         src/detection/physicaldisk/physicaldisk_apple.c
+        src/detection/physicalmemory/physicalmemory_apple.m
         src/detection/diskio/diskio_apple.c
         src/detection/displayserver/displayserver_apple.c
         src/detection/font/font_apple.m
         src/detection/gpu/gpu_apple.c
         src/detection/gpu/gpu_apple.m
         src/detection/host/host_apple.c
-        src/detection/lm/lm_nosupport.c
         src/detection/icons/icons_nosupport.c
+        src/detection/lm/lm_nosupport.c
+        src/detection/loadavg/loadavg_bsd.c
         src/detection/libc/libc_apple.c
         src/detection/locale/locale_linux.c
         src/detection/localip/localip_linux.c
@@ -602,6 +640,7 @@ elseif(APPLE)
         src/detection/wm/wm_apple.c
         src/detection/de/de_nosupport.c
         src/detection/wmtheme/wmtheme_apple.m
+        src/detection/camera/camera_apple.m
         src/util/apple/cf_helpers.c
         src/util/apple/osascript.m
         src/util/platform/FFPlatform_unix.c
@@ -616,6 +655,7 @@ elseif(WIN32)
         src/detection/bios/bios_windows.c
         src/detection/bluetooth/bluetooth_windows.c
         src/detection/board/board_windows.c
+        src/detection/bootmgr/bootmgr_windows.c
         src/detection/brightness/brightness_windows.cpp
         src/detection/chassis/chassis_windows.c
         src/detection/cpu/cpu_windows.c
@@ -631,11 +671,13 @@ elseif(WIN32)
         src/detection/icons/icons_windows.c
         src/detection/libc/libc_windows.cpp
         src/detection/lm/lm_nosupport.c
+        src/detection/loadavg/loadavg_nosupport.c
         src/detection/locale/locale_windows.c
         src/detection/localip/localip_windows.c
         src/detection/gamepad/gamepad_windows.c
         src/detection/media/media_nosupport.c
         src/detection/memory/memory_windows.c
+        src/detection/physicalmemory/physicalmemory_linux.c
         src/detection/monitor/monitor_windows.c
         src/detection/netio/netio_windows.c
         src/detection/opengl/opengl_windows.c
@@ -657,6 +699,7 @@ elseif(WIN32)
         src/detection/wm/wm_windows.cpp
         src/detection/de/de_nosupport.c
         src/detection/wmtheme/wmtheme_windows.c
+        src/detection/camera/camera_windows.cpp
         src/util/windows/getline.c
         src/util/windows/com.cpp
         src/util/windows/registry.c
@@ -687,6 +730,9 @@ check_function_exists(wcwidth HAVE_WCWIDTH)
 if(NOT HAVE_WCWIDTH)
     list(APPEND LIBFASTFETCH_SRC src/3rdparty/mk_wcwidch/wcwidth.c)
 endif()
+if(LINUX)
+    check_function_exists(statx HAVE_STATX)
+endif()
 
 if(ENABLE_SYSTEM_YYJSON)
     find_package(yyjson)
@@ -716,8 +762,8 @@ if(yyjson_FOUND)
 else()
     # Used for dlopen finding dylibs installed by homebrew
     # `/opt/homebrew/lib` is not on in dlopen search path by default
-    if(APPLE AND DEFINED ENV{HOMEBREW_PREFIX})
-        set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,-rpath,$ENV{HOMEBREW_PREFIX}/lib")
+    if(APPLE)
+        set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,-rpath,/opt/homebrew/lib -Wl,-rpath,/usr/local/lib")
     endif()
 endif()
 
@@ -743,17 +789,34 @@ if(BSD AND EXISTS "/usr/local/bin/objdump")
     endif()
 endif()
 
-target_compile_definitions(libfastfetch PUBLIC _GNU_SOURCE _XOPEN_SOURCE __STDC_WANT_LIB_EXT1__=1)
+target_compile_definitions(libfastfetch PUBLIC _GNU_SOURCE _XOPEN_SOURCE __STDC_WANT_LIB_EXT1__=1 _FILE_OFFSET_BITS=64)
 if(WIN32)
     target_compile_definitions(libfastfetch PUBLIC WIN32_LEAN_AND_MEAN=1)
 elseif(APPLE)
     target_compile_definitions(libfastfetch PUBLIC _DARWIN_C_SOURCE)
 endif()
 
+if(HAVE_STATX)
+    target_compile_definitions(libfastfetch PRIVATE FF_HAVE_STATX)
+endif()
+
 if(HAVE_WCWIDTH)
     target_compile_definitions(libfastfetch PRIVATE FF_HAVE_WCWIDTH)
 endif()
 
+if(NOT "${CUSTOM_PCI_IDS_PATH}" STREQUAL "")
+    message(STATUS "Custom file path of pci.ids: ${CUSTOM_PCI_IDS_PATH}")
+    target_compile_definitions(libfastfetch PRIVATE FF_CUSTOM_PCI_IDS_PATH=${CUSTOM_PCI_IDS_PATH})
+endif()
+if(NOT "${CUSTOM_AMDGPU_IDS_PATH}" STREQUAL "")
+    message(STATUS "Custom file path of amdgpu.ids: ${CUSTOM_AMDGPU_IDS_PATH}")
+    target_compile_definitions(libfastfetch PRIVATE FF_CUSTOM_AMDGPU_IDS_PATH=${CUSTOM_AMDGPU_IDS_PATH})
+endif()
+if(NOT "${CUSTOM_OS_RELEASE_PATH}" STREQUAL "")
+    message(STATUS "Custom file path of os_release: ${CUSTOM_OS_RELEASE_PATH}")
+    target_compile_definitions(libfastfetch PRIVATE FF_CUSTOM_OS_RELEASE_PATH=${CUSTOM_OS_RELEASE_PATH})
+endif()
+
 function(ff_lib_enable VARNAME PKGCONFIG_NAMES CMAKE_NAME)
     if(NOT ENABLE_${VARNAME})
         return()
@@ -790,10 +853,6 @@ function(ff_lib_enable VARNAME PKGCONFIG_NAMES CMAKE_NAME)
     endforeach()
 endfunction()
 
-ff_lib_enable(LIBPCI
-    "libpci"
-    "Pci"
-)
 ff_lib_enable(VULKAN
     "vulkan"
     "Vulkan"
@@ -906,19 +965,17 @@ if(ENABLE_THREADS)
     endif()
 endif()
 
-if(ENABLE_PCI_MEMORY)
-    target_compile_definitions(libfastfetch PRIVATE FF_USE_PCI_MEMORY)
-endif()
-
 if(LINUX)
     target_link_libraries(libfastfetch
         PRIVATE "m"
     )
 elseif(APPLE)
     target_link_libraries(libfastfetch
+        PRIVATE "-framework AVFoundation"
         PRIVATE "-framework Cocoa"
         PRIVATE "-framework CoreFoundation"
         PRIVATE "-framework CoreAudio"
+        PRIVATE "-framework CoreMedia"
         PRIVATE "-framework CoreVideo"
         PRIVATE "-framework CoreWLAN"
         PRIVATE "-framework IOBluetooth"
@@ -1103,15 +1160,43 @@ install(
 ##################
 
 set(CPACK_GENERATOR "TGZ;ZIP")
+if(APPLE)
+    string(TOLOWER "${CMAKE_PROJECT_NAME}-macos-universal" CPACK_PACKAGE_FILE_NAME)
+else() # We don't use this in Windows
+    if(CMAKE_SYSTEM_PROCESSOR STREQUAL "x86_64")
+        set(CMAKE_SYSTEM_PROCESSOR "amd64")
+    endif()
+    if(IS_MUSL)
+        string(TOLOWER "${CMAKE_PROJECT_NAME}-musl-${CMAKE_SYSTEM_PROCESSOR}" CPACK_PACKAGE_FILE_NAME)
+    else()
+        string(TOLOWER "${CMAKE_PROJECT_NAME}-${CMAKE_SYSTEM_NAME}-${CMAKE_SYSTEM_PROCESSOR}" CPACK_PACKAGE_FILE_NAME)
+    endif()
+endif()
 
 if(LINUX)
-    set(CPACK_GENERATOR "${CPACK_GENERATOR};DEB;RPM")
+    find_program(HAVE_DPKG "dpkg")
+    if(HAVE_DPKG)
+        set(CPACK_GENERATOR "${CPACK_GENERATOR};DEB")
 
-    set(CPACK_DEBIAN_PACKAGE_SECTION, "utils")
-    set(CPACK_DEBIAN_PACKAGE_PRIORITY "optional")
-    set(CPACK_DEBIAN_PACKAGE_DEPENDS "libc6")
+        set(CPACK_DEBIAN_PACKAGE_SECTION, "utils")
+        set(CPACK_DEBIAN_PACKAGE_PRIORITY "optional")
 
-    set(CPACK_RPM_PACKAGE_LICENSE "MIT")
+        if(NOT IS_MUSL)
+            EXECUTE_PROCESS (
+                COMMAND getconf GNU_LIBC_VERSION
+                OUTPUT_VARIABLE GLIBC_VERSION
+                OUTPUT_STRIP_TRAILING_WHITESPACE)
+            STRING (REPLACE "glibc " "" GLIBC_VERSION ${GLIBC_VERSION})
+            set(CPACK_DEBIAN_PACKAGE_DEPENDS "libc6 (>= ${GLIBC_VERSION})")
+        endif()
+    endif()
+
+    find_program(HAVE_RPMBUILD "rpmbuild")
+    if(HAVE_RPMBUILD)
+        set(CPACK_GENERATOR "${CPACK_GENERATOR};RPM")
+
+        set(CPACK_RPM_PACKAGE_LICENSE "MIT")
+    endif()
 endif()
 
 set(CPACK_SET_DESTDIR ON)
@@ -1119,7 +1204,7 @@ set(CPACK_SET_DESTDIR ON)
 set(CPACK_PACKAGE_CONTACT "Linus Dierheimer <Linus@Dierheimer.de>")
 set(CPACK_PACKAGE_DESCRIPTION "\
 fastfetch is a neofetch-like tool for fetching system information and displaying them in a pretty way. \
-It is written in c to achieve much better performance.\
+It is written mostly in C to achieve much better performance.\
 ")
 
 include(CPack)

CODE_OF_CONDUCT.md

@@ -0,0 +1,133 @@
+
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+We as members, contributors, and leaders pledge to make participation in our
+community a harassment-free experience for everyone, regardless of age, body
+size, visible or invisible disability, ethnicity, sex characteristics, gender
+identity and expression, level of experience, education, socio-economic status,
+nationality, personal appearance, race, caste, color, religion, or sexual
+identity and orientation.
+
+We pledge to act and interact in ways that contribute to an open, welcoming,
+diverse, inclusive, and healthy community.
+
+## Our Standards
+
+Examples of behavior that contributes to a positive environment for our
+community include:
+
+* Demonstrating empathy and kindness toward other people
+* Being respectful of differing opinions, viewpoints, and experiences
+* Giving and gracefully accepting constructive feedback
+* Accepting responsibility and apologizing to those affected by our mistakes,
+  and learning from the experience
+* Focusing on what is best not just for us as individuals, but for the overall
+  community
+
+Examples of unacceptable behavior include:
+
+* The use of sexualized language or imagery, and sexual attention or advances of
+  any kind
+* Trolling, insulting or derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or email address,
+  without their explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+## Enforcement Responsibilities
+
+Community leaders are responsible for clarifying and enforcing our standards of
+acceptable behavior and will take appropriate and fair corrective action in
+response to any behavior that they deem inappropriate, threatening, offensive,
+or harmful.
+
+Community leaders have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, and will communicate reasons for moderation
+decisions when appropriate.
+
+## Scope
+
+This Code of Conduct applies within all community spaces, and also applies when
+an individual is officially representing the community in public spaces.
+Examples of representing our community include using an official email address,
+posting via an official social media account, or acting as an appointed
+representative at an online or offline event.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported to the community leaders responsible for enforcement at
+[INSERT CONTACT METHOD].
+All complaints will be reviewed and investigated promptly and fairly.
+
+All community leaders are obligated to respect the privacy and security of the
+reporter of any incident.
+
+## Enforcement Guidelines
+
+Community leaders will follow these Community Impact Guidelines in determining
+the consequences for any action they deem in violation of this Code of Conduct:
+
+### 1. Correction
+
+**Community Impact**: Use of inappropriate language or other behavior deemed
+unprofessional or unwelcome in the community.
+
+**Consequence**: A private, written warning from community leaders, providing
+clarity around the nature of the violation and an explanation of why the
+behavior was inappropriate. A public apology may be requested.
+
+### 2. Warning
+
+**Community Impact**: A violation through a single incident or series of
+actions.
+
+**Consequence**: A warning with consequences for continued behavior. No
+interaction with the people involved, including unsolicited interaction with
+those enforcing the Code of Conduct, for a specified period of time. This
+includes avoiding interactions in community spaces as well as external channels
+like social media. Violating these terms may lead to a temporary or permanent
+ban.
+
+### 3. Temporary Ban
+
+**Community Impact**: A serious violation of community standards, including
+sustained inappropriate behavior.
+
+**Consequence**: A temporary ban from any sort of interaction or public
+communication with the community for a specified period of time. No public or
+private interaction with the people involved, including unsolicited interaction
+with those enforcing the Code of Conduct, is allowed during this period.
+Violating these terms may lead to a permanent ban.
+
+### 4. Permanent Ban
+
+**Community Impact**: Demonstrating a pattern of violation of community
+standards, including sustained inappropriate behavior, harassment of an
+individual, or aggression toward or disparagement of classes of individuals.
+
+**Consequence**: A permanent ban from any sort of public interaction within the
+community.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage],
+version 2.1, available at
+[https://www.contributor-covenant.org/version/2/1/code_of_conduct.html][v2.1].
+
+Community Impact Guidelines were inspired by
+[Mozilla's code of conduct enforcement ladder][Mozilla CoC].
+
+For answers to common questions about this code of conduct, see the FAQ at
+[https://www.contributor-covenant.org/faq][FAQ]. Translations are available at
+[https://www.contributor-covenant.org/translations][translations].
+
+[homepage]: https://www.contributor-covenant.org
+[v2.1]: https://www.contributor-covenant.org/version/2/1/code_of_conduct.html
+[Mozilla CoC]: https://github.com/mozilla/diversity
+[FAQ]: https://www.contributor-covenant.org/faq
+[translations]: https://www.contributor-covenant.org/translations

DEVELOPMENT.md

@@ -1,34 +0,0 @@
-# Development help
-
-This file is not an official documentation!
-Here i just add things that are easy to forget.
-
-## Features i am planning to implement
-
-### Specific
-
-- [ ] Split the project in different libs / executables, all linking static by default:
-  - `libffdetect`: contains all the detection stuff. To be used by anything that needs system information
-  - `libffprint`: contains the printing functions, logos, format etc
-  - `fastfetch` and `flashfetch`: Executables, that initialize the config of libffprint. Fist one at runtime, second one at compile time
-- [ ] Make LocalIP module more configurable
-- [ ] Automatic migrate old config files to newer versions
-- [ ] ZSH completions
-- [ ] Fish completions
-- [ ] Make CPU usage detection much faster and more accurate
-- [ ] Detect CPU usage in a common detection method and expose it both to the cpuUsage module and the cpu format string
-- [ ] Per session caching
-
-### General
-- More presets
-- More logos
-- More package managers
-- More DE detections
-- More WM theme detections
-- More terminal font detections
-- Performance optimizations
-- More module specific options
-- Better error handling, especially the messages shown when using --show-errors
-- Using package managers libraries for package count detection instead own. E.g. using libalpm instead of counting files in /var/lib/pacman/local
-- Better documentation (especially default config file and the various --help options. Colored output?)
-- General feature parity with neofetch, to demonstrate supremity of c

README.md

@@ -27,21 +27,34 @@ There are [screenshots on different platforms](https://github.com/fastfetch-cli/
 
 ### Linux
 
-* Debian / Ubuntu: Download `fastfetch-<version>-Linux.deb` from [Github release page](https://github.com/fastfetch-cli/fastfetch/releases/latest) and `dpkg -i fastfetch-<version>-Linux.deb`
+Some distros packaged an outdated fastfetch version. Older version is not supported, please always ensure that the latest version is used.
+
+* Ubuntu: [`ppa:zhangsongcui3371/fastfetch`](https://launchpad.net/~zhangsongcui3371/+archive/ubuntu/fastfetch) (for Ubuntu 22.04 or newer)
+* Debian / Ubuntu: Download `fastfetch-linux-<proper architecture>.deb` from [Github release page](https://github.com/fastfetch-cli/fastfetch/releases/latest) and double-click it (for Ubuntu 20.04 or newer and Debian 11 or newer).
 * Arch Linux: `sudo pacman -S fastfetch`
 * Fedora: `sudo dnf install fastfetch`
 * Gentoo: `sudo emerge --ask app-misc/fastfetch`
-* NixOS: `sudo nix-shell -p fastfetch`
+* Alpine: `apk add --upgrade fastfetch`
+* NixOS: `nix-shell -p fastfetch`
 * openSUSE: `sudo zypper install fastfetch`
+* ALT Linux: `sudo apt-get install fastfetch`
 
 Replace sudo with doas depending on what you use.
 
-[See also if fastfetch has been packaged for your favorite Linux distro](#Packaging)
+[See also if fastfetch has been packaged for your favorite Linux distro](#Packaging).
+
+If fastfetch is not packaged for your distro or an outdated version is packaged, [linuxbrew](https://brew.sh/) is a good alternate: `brew install fastfetch`
 
 ### macOS
 
+...via [HomeBrew](https://brew.sh):
+
 `brew install fastfetch`
 
+...via [MacPorts](https://www.macports.org):
+
+`sudo port install fastfetch`
+
 ### Windows
 
 `scoop install fastfetch`
@@ -88,11 +101,90 @@ Logos can be heavily customized too; see the [logo documentation](https://github
 
 ## FAQ
 
-Q: Why do you need a very performant version of neofetch?
-> I like putting neofetch in my ~/.bashrc to have a system overview whenever I use the terminal, but the slow speed annoyed me, so I created this. Also neofetch didn't output everything correctly (e.g Font is displayed as "[Plasma], Noto Sans, 10 [GTK2/3]") and writing my own tool gave me the possibility to fine tune it to run perfectly on at least my configuration.
+### Q: Neofetch is good enough. Why do I need fastfetch?
 
-Q: It does not display [*] correctly for me, what can I do?
-> This is most likely because your system is not implemented (yet). At the moment I am focusing more on making the core app better, than adding more configurations. Feel free to open a pull request if you want to add support for your configuration
+1. Fastfetch is actively maintained.
+2. Fastfetch is faster. As the name suggests.
+3. Fastfetch is more feature-rich. By default fastfetch only has a few modules enabled. Use `fastfetch -c all` to find what you want.
+4. Fastfetch is more configurable. You can find more information in the Wiki: <https://github.com/fastfetch-cli/fastfetch/wiki/Configuration>
+5. Fastfetch is more polished. For example, neofetch prints `555MiB` in `Memory` module and `23G` in `Disk` module (notibily the difference of `MiB` and `G`), while fastfetch prints `555.00 MiB` and `22.97 GiB` respectively.
+6. Fastfetch is more accurate. For example, [neofetch never actually supports Wayland protocol](https://github.com/dylanaraps/neofetch/pull/2395).
+
+### Q: Fastfetch shows my local IP address. It leaks my privacy!
+
+A local IP (10.x.x.x, 172.x.x.x, 192.168.x.x) has nothing to do with privacy. It only makes sense if you are on the same network, for example, if you connect to the same Wi-Fi network.
+
+Actually the `Local IP` module is the most useful module for me personally. I (@CarterLi) have several VMs installed to test fastfetch and often need to SSH into them. I have fastfetch running on shell startup and I never need to type `ip addr` manually.
+
+If you really don't like it, you can disable the `Local IP` module in `config.jsonc`.
+
+### Q: Where is the config file? I can't find it.
+
+`Fastfetch` don't generate config file automatically. You can use `fastfetch --gen-config` to generate one. The config file will be saved in `~/.config/fastfetch/config.jsonc` by default. See [Wiki for detail](https://github.com/fastfetch-cli/fastfetch/wiki/Configuration).
+
+### Q: The configuration is so complex. Where is the documentation?
+
+Fastfetch uses JSON (with comments) for configuration. I suggest you use an IDE with JSON schema support (like VSCode) to edit it.
+
+Alternatively, you can refer to the presets in [`presets` directory](https://github.com/fastfetch-cli/fastfetch/tree/dev/presets).
+
+### Q: I WANT THE DOCUMENTATION!
+
+[Here is the documentation](https://github.com/fastfetch-cli/fastfetch/wiki/Json-Schema). It is generated from [JSON schema](https://github.com/fastfetch-cli/fastfetch/blob/dev/doc/json_schema.json) but you won't like it.
+
+### Q: How can I customize the module output?
+
+Fastfetch uses `format` to generate output. For example to make `GPU` module show GPU name only and ignore other information, you can use
+
+```jsonc
+{
+    "modules": [
+        {
+            "type": "gpu",
+            "format": "{2}" // See `fastfetch -h gpu-format` for detail
+        }
+    ]
+}
+```
+
+which is equivalent to `fastfetch -s gpu --gpu-format '{2}'`
+
+See `fastfetch -h format` for basic usage. For module specific formattion, see `fastfetch -h <module>-format`
+
+### Q: I have my own ascii-art / image file. How can I show it with fastfetch?
+
+Try `fastfetch -l /path/to/logo`. See [logo documentation](https://github.com/fastfetch-cli/fastfetch/wiki/Logo-options) for detail.
+
+### Q: Fastfetch runs in white and black on shell startup. Why?
+
+This issue usually happens when using fastfetch with `p10k`. There are known incompatibility between fastfetch and p10k instant prompt.
+The p10k doc clearly states that you should NOT print anything to stdout after `p10k-instant-prompt` is initialized. You should either put `fastfetch` before initialization of `p10k-instant-prompt` (recommended)
+
+You can always use `fastfetch --pipe false` to force fastfetch running in colorful mode.
+
+### Q: I want feature A / B / C. Will fastfetch support it?
+
+Fastfetch is a system information tool. We only accept hardware or system level software feature requests. For most personal uses, I recommend using `Command` module to detect it yourself, which can be used to grab output from a custom shell script:
+
+```jsonc
+// This module shows the default editor
+{
+    "modules": [
+        {
+            "type": "command",
+            "text": "$EDITOR --version | head -1",
+            "key": "Editor"
+        }
+    ]
+}
+```
+
+Otherwise, open a feature request in [GitHub Issues](https://github.com/fastfetch-cli/fastfetch/issues).
+
+### Q: I have questions. Where can I get help?
+
+* For usage questions, please start a discussion in [GitHub Discussions](https://github.com/fastfetch-cli/fastfetch/discussions).
+* For possible bugs, please open an issue in [GitHub Issues](https://github.com/fastfetch-cli/fastfetch/issues). Be sure to fill the bug-report template carefully for developers to investigate.
 
 ## Star History
 

completions/bash

@@ -191,14 +191,13 @@ __fastfetch_completion()
         "--escape-bedrock"
         "--pipe"
         "--title-fqdn"
-        "--escape-bedrock"
         "--disk-folders"
         "--disk-show-external"
         "--disk-show-hidden"
         "--disk-show-subvolumes"
         "--gpu-hide-integrated"
         "--gpu-hide-discrete"
-        "--gpu-force-vulkan"
+        "--gpu-force-method"
         "--disk-show-unknown"
         "--bluetooth-show-disconnected"
     )
@@ -227,8 +226,6 @@ __fastfetch_completion()
         "--separator"
         "-s"
         "--structure"
-        "--set"
-        "--set-keyless"
         "--player-name"
         "--percent-type"
         "--publicip-url"
@@ -360,7 +357,6 @@ __fastfetch_completion()
     local FF_OPTIONS_PATH=(
         "-c"
         "--config"
-        "--os-file"
         "--lib-pci"
         "--lib-vulkan"
         "--lib-wayland"

completions/fish

@@ -1,7 +1,7 @@
 #!/usr/bin/env fish
 
 if not type -q fastfetch
-    return
+    exit
 end
 
 complete -c fastfetch -f
@@ -85,7 +85,7 @@ string match -r -a -g "^###> ?(.*)" < (status -f) | string collect | python3 | s
 ###>                 elif type == 'config':
 ###>                     print(f'{command_prefix} -x -a "(__fastfetch_complete_config)"')
 ###>                 elif type == 'enum':
-###>                     temp: str = ' '.join(map(lambda x: f"{x[0]}\\t{x[1]}", flag["arg"]["enum"].items()))
+###>                     temp: str = ' '.join(flag["arg"]["enum"])
 ###>                     print(f'{command_prefix} -x -a "{temp}"')
 ###>                 elif type == 'logo':
 ###>                     print(f'{command_prefix} -x -a "(__fastfetch_complete_logo)"')

debian/changelog

@@ -0,0 +1,60 @@
+fastfetch (2.9.2) jammy; urgency=medium
+
+  * Update to 2.9.2
+
+ -- Carter Li <zhangsongcui@live.cn>  Tue, 16 Apr 2024 16:32:40 +0800
+
+fastfetch (2.9.1) jammy; urgency=medium
+
+  * Update to 2.9.1
+
+ -- Carter Li <zhangsongcui@live.cn>  Mon, 08 Apr 2024 09:34:30 +0800
+
+fastfetch (2.8.10) jammy; urgency=medium
+
+  * Update to 2.8.10
+
+ -- Carter Li <zhangsongcui@live.cn>  Mon, 25 Mar 2024 15:01:53 +0800
+
+fastfetch (2.8.9) jammy; urgency=medium
+
+  * Update to 2.8.9
+
+ -- Carter Li <zhangsongcui@live.cn>  Fri, 15 Mar 2024 10:49:42 +0800
+
+fastfetch (2.8.8) jammy; urgency=medium
+
+  * Update to 2.8.8
+
+ -- Carter Li <zhangsongcui@live.cn>  Fri, 08 Mar 2024 09:59:41 +0800
+
+fastfetch (2.8.6) jammy; urgency=medium
+
+  * Update to 2.8.6
+
+ -- Carter Li <zhangsongcui@live.cn>  Wed, 28 Feb 2024 10:01:40 +0800
+
+fastfetch (2.8.4) jammy; urgency=medium
+
+  * Update to 2.8.4
+
+ -- Carter Li <zhangsongcui@live.cn>  Fri, 23 Feb 2024 16:14:57 +0800
+
+fastfetch (2.7.1ubuntu2) jammy; urgency=medium
+
+  * Ignore .git
+
+ -- Carter Li <zhangsongcui@live.cn>  Wed, 07 Feb 2024 14:23:23 +0800
+
+fastfetch (2.7.1ubuntu1) jammy; urgency=medium
+
+  * Update build scripts
+
+ -- Carter Li <zhangsongcui@live.cn>  Wed, 07 Feb 2024 13:53:37 +0800
+
+fastfetch (2.7.1) jammy; urgency=medium
+
+  * Initial release.
+
+ -- Carter Li <zhangsongcui@live.cn>  Tue, 06 Feb 2024 15:01:11 +0800
+

debian/compat

@@ -0,0 +1 @@
+12

debian/control

@@ -0,0 +1,13 @@
+Source: fastfetch
+Section: universe/utils
+Priority: optional
+Maintainer: Carter Li <zhangsongcui@live.cn>
+Build-Depends: libvulkan-dev, libwayland-dev, libxrandr-dev, libxcb-randr0-dev, libdconf-dev, libdbus-1-dev, libmagickcore-dev, libxfconf-0-dev, libsqlite3-dev, librpm-dev, libegl-dev, libglx-dev, libosmesa6-dev, ocl-icd-opencl-dev, libnm-dev, libpulse-dev, libdrm-dev, libddcutil-dev, libchafa-dev, directx-headers-dev, pkgconf, cmake (>= 3.12), debhelper (>= 11.2), dh-cmake, dh-cmake-compat (= 1), dh-sequence-cmake, dh-sequence-ctest, ninja-build
+Standards-Version: 4.0.0
+Homepage: https://github.com/fastfetch-cli/fastfetch
+
+Package: fastfetch
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Fastfetch is a neofetch-like tool for fetching system information and displaying them in a pretty way.
+ It is written mainly in C, with performance and customizability in mind.

debian/copyright

@@ -0,0 +1,11 @@
+Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: fastfetch
+Source: https://github.com/fastfetch-cli/fastfetch
+
+Files: *
+Copyright: 2024 fastfetch-cli
+License: Expat
+
+Files: src/3rdparty/yyjson/*
+Copyright: 2020 YaoYuan
+License: Expat

debian/files

@@ -0,0 +1 @@
+fastfetch_2.9.2_source.buildinfo universe/utils optional

debian/publish.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env bash
+
+debuild -S -i -I
+dput ppa:zhangsongcui3371/fastfetch ~/fastfetch_*.changes

debian/rules

@@ -0,0 +1,7 @@
+#!/usr/bin/make -f
+
+%:
+	dh $@ --buildsystem=cmake+ninja
+
+override_dh_ctest_configure:
+	dh_ctest_configure -- -DSET_TWEAK=OFF -DBUILD_TESTS=ON -DCMAKE_BUILD_TYPE=RelWithDebInfo

debian/watch

@@ -0,0 +1,4 @@
+version=4
+opts="filenamemangle=s%.*/@ANY_VERSION@%@PACKAGE@-$1.tar.gz%,searchmode=plain" \
+https://api.github.com/repos/fastfetch-cli/fastfetch/releases?per_page=100 \
+https://api.github.com/repos/fastfetch-cli/fastfetch/tarball/@ANY_VERSION@

doc/fastfetch.1.in

@@ -107,12 +107,12 @@ To list all available modules, use \fB \-\-list\-modules \fR
 
 .SS "Config Files"
 
-fastfetch supports two types of config files. The legacy
-configuration files and a JSONC based format.
+Fastfetch uses JSONC based format for configuration. Fastfetch doesn't generate
+config file automatically; it should be generated manually by \fB \-\-gen\-config\fR.
+The config file will be saved in \fB~/.config/fastfetch/config.jsonc\fR by default.
 
 A JSONC config file is a JSON file that also supports comments with (//). Those
-files must have the extension '.jsonc'. You can migrate a legacy config
-file to the JSONC format by using \fB\-\-gen\-config\fR.
+files must have the extension '.jsonc'.
 
 The specified configuration/preset files are searched in the following order:
 
@@ -122,10 +122,7 @@ The specified configuration/preset files are searched in the following order:
 
 3. relative to /usr/share/fastfetch/presets/
 
-When both a '.jsonc' and a '.conf' file with the same name is found,
-the '.jsonc' file is preferred.
-
-Fastfetch provides some default presets. List them with \fB \-\-print\-available\-presets\fR.
+Fastfetch provides some default presets. List them with \fB\-\-list\-presets\fR.
 
 .SH "SEE ALSO"
 .BR neofetch (1)

presets/all.jsonc

@@ -6,13 +6,16 @@
         "os",
         "host",
         "bios",
+        "bootmgr",
         "board",
         "chassis",
         "kernel",
         "uptime",
+        "loadavg",
         "processes",
         "packages",
         "shell",
+        "editor",
         "display",
         "brightness",
         "monitor",
@@ -28,10 +31,15 @@
         "terminal",
         "terminalfont",
         "terminalsize",
-        "cpu",
+        "terminaltheme",
+        {
+            "type": "cpu",
+            "showPeCoreCount": true
+        },
         "cpuusage",
         "gpu",
         "memory",
+        "physicalmemory",
         "swap",
         "disk",
         "battery",
@@ -39,7 +47,11 @@
         "player",
         "media",
         "publicip",
-        "localip",
+        {
+            "type": "localip",
+            "showIpV6": true,
+            "showMac": true
+        },
         "wifi",
         "datetime",
         "locale",
@@ -49,6 +61,7 @@
         "users",
         "bluetooth",
         "sound",
+        "camera",
         "gamepad",
         "weather",
         "netio",

presets/archey.jsonc

@@ -0,0 +1,84 @@
+{
+    "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
+    "modules": [
+        {
+            "type": "title",
+            "key": "User",
+            "format": "{1}"
+        },
+        {
+            "type": "title",
+            "key": "Hostname",
+            "format": "{2}"
+        },
+        {
+            "type": "host",
+            "key": "Model"
+        },
+        {
+            "type": "os",
+            "format": "{3} {9} {12}"
+        },
+        "kernel",
+        "uptime",
+        {
+            "type": "loadavg",
+            "key": "Load Average"
+        },
+        "processes",
+        {
+            "type": "wm",
+            "key": "Window Manager"
+        },
+        {
+            "type": "de",
+            "key": "Desktop Environment"
+        },
+        {
+            "type": "shell",
+            "format": "{7}"
+        },
+        {
+            "type": "terminal",
+            "format": "{5} {6} \u001b[37m█\u001b[97m█ \u001b[36m█\u001b[96m█ \u001b[35m█\u001b[95m█ \u001b[34m█\u001b[94m█ \u001b[33m█\u001b[93m█ \u001b[32m█\u001b[92m█ \u001b[31m█\u001b[91m█ \u001b[30m█\u001b[90m█"
+        },
+        {
+            "type": "packages",
+            "format": "{1}"
+        },
+        {
+            "type": "cpu",
+            "key": "Temperature",
+            "temp": true,
+            "format": "{8}"
+        },
+        {
+            "type": "cpu",
+            "key": "CPU",
+            "format": "{4} x {1}"
+        },
+        {
+            "type": "gpu",
+            "format": "{2}"
+        },
+        {
+            "type": "memory",
+            "key": "RAM"
+        },
+        {
+            "type": "disk",
+            "key": "Disk",
+            "folders": "/"
+        },
+        {
+            "type": "localip",
+            "key": "LAN IP",
+            "showIpv6": true,
+            "showPrefixLen": false
+        },
+        {
+            "type": "publicip",
+            "key": "WAN IP"
+        }
+    ]
+}

presets/ci.jsonc

@@ -6,19 +6,23 @@
     "showErrors": true,
     "noBuffer": true
   },
+  "logo": null,
   "modules": [
     "title",
     "separator",
     "os",
     "host",
     "bios",
+    "bootmgr",
     "board",
     "chassis",
     "kernel",
     "uptime",
+    "loadavg",
     "processes",
     "packages",
     "shell",
+    "editor",
     "display",
     "brightness",
     "monitor",
@@ -34,10 +38,15 @@
     "terminal",
     "terminalfont",
     "terminalsize",
-    "cpu",
+    "terminaltheme",
+    {
+        "type": "cpu",
+        "showPeCoreCount": true
+    },
     "cpuusage",
     "gpu",
     "memory",
+    "physicalmemory",
     "swap",
     "disk",
     "battery",
@@ -45,7 +54,11 @@
     "player",
     "media",
     "publicip",
-    "localip",
+    {
+        "type": "localip",
+        "showIpV6": true,
+        "showMac": true
+    },
     "wifi",
     "datetime",
     "locale",
@@ -55,6 +68,7 @@
     "users",
     "bluetooth",
     "sound",
+    "camera",
     "gamepad",
     {
       "type": "weather",

presets/examples/10.jsonc

@@ -84,17 +84,17 @@
         },
         {
             "type": "host",
-            "key": " PC",
+            "key": "󰌢 PC",
             "keyColor": "green"
         },
         {
             "type": "cpu",
-            "key": "│ ├",
+            "key": "│ ├󰻠",
             "keyColor": "green"
         },
         {
             "type": "gpu",
-            "key": "│ ├﬙",
+            "key": "│ ├󰍛",
             "keyColor": "green"
         },
         {

presets/examples/11.jsonc

@@ -1,5 +1,5 @@
 {
-    "$schema": "file:///C:/msys64/home/zhang/fastfetch/doc/json_schema.json",
+    "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
     "logo": {
         "type": "small"
     },

presets/examples/12.jsonc

@@ -0,0 +1,104 @@
+{
+    "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
+    "logo": {
+        "type": "none"
+    },
+    "display": {
+        "separator": "->   "
+    },
+    "modules": [
+        {
+            "type": "title",
+            "format": "                                {6}{7}{8}"
+        },
+        "break",
+        {
+            "type": "custom",
+            "format": "┌───────────────────────────── \u001b[1mSystem Information\u001b[0m ─────────────────────────────┐" // `\u001b` is `\033`, or `\e`
+        },
+        "break",
+        {
+            "key": "     OS           ",
+            "keyColor": "red",
+            "type": "os"
+        },
+        {
+            "key": "    󰌢 Machine      ",
+            "keyColor": "green",
+            "type": "host"
+        },
+        {
+            "key": "     Kernel       ",
+            "keyColor": "magenta",
+            "type": "kernel"
+        },
+        {
+            "key": "    󰅐 Uptime       ",
+            "keyColor": "red",
+            "type": "uptime"
+        },
+        {
+            "key": "    󰍹 Resolution   ",
+            "keyColor": "yellow",
+            "type": "display",
+            "compactType": "original-with-refresh-rate"
+        },
+        {
+            "key": "     WM           ",
+            "keyColor": "blue",
+            "type": "wm"
+        },
+        {
+            "key": "     DE           ",
+            "keyColor": "green",
+            "type": "de"
+        },
+        {
+            "key": "     Shell        ",
+            "keyColor": "cyan",
+            "type": "shell"
+        },
+        {
+            "key": "     Terminal     ",
+            "keyColor": "red",
+            "type": "terminal"
+        },
+        {
+            "key": "    󰻠 CPU          ",
+            "keyColor": "yellow",
+            "type": "cpu"
+        },
+        {
+            "key": "    󰍛 GPU          ",
+            "keyColor": "blue",
+            "type": "gpu"
+        },
+        {
+            "key": "    󰑭 Memory       ",
+            "keyColor": "magenta",
+            "type": "memory"
+        },
+        {
+            "key": "    󰩟 Local IP     ",
+            "keyColor": "red",
+            "type": "localip",
+            "compact": true
+        },
+        {
+            "key": "    󰩠 Public IP    ",
+            "keyColor": "cyan",
+            "type": "publicip"
+        },
+        "break",
+        {
+            "type": "custom",
+            "format": "└──────────────────────────────────────────────────────────────────────────────┘" // `\u001b` is `\033`, or `\e`
+        },
+        "break",
+        {
+            "type": "colors",
+            "paddingLeft": 34,
+            "symbol": "circle"
+        }
+    ]
+}

presets/examples/13.jsonc

@@ -0,0 +1,85 @@
+{
+    "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
+    "logo": {
+        "type": "small",
+        "padding": {
+            "top": 1
+        }
+    },
+    "display": {
+        "separator": "",
+        "keyWidth": 15
+    },
+    "modules": [
+        {
+            "key": "╭───────────╮",
+            "type": "custom"
+        },
+        {
+            // draw borders first to make colors of left and right border consistant
+            "key": "│           │\u001b[11D\u001b[31m user",
+            "type": "title",
+            "format": "{1}"
+        },
+        {
+            "key": "│           │\u001b[11D\u001b[32m󰇅 hname",
+            "type": "title",
+            "format": "{2}"
+        },
+        {
+            "key": "│           │\u001b[11D\u001b[33m󰅐 uptime",
+            "type": "uptime"
+        },
+        {
+            "key": "│           │\u001b[11D\u001b[34m󰟾 distro",
+            "type": "os"
+        },
+        {
+            "key": "│           │\u001b[11D\u001b[35m kernel",
+            "type": "kernel"
+        },
+        {
+            "key": "│           │\u001b[11D\u001b[36m󰇄 desktop",
+            "type": "de"
+        },
+        {
+            "key": "│           │\u001b[11D\u001b[31m term",
+            "type": "terminal"
+        },
+        {
+            "key": "│           │\u001b[11D\u001b[32m shell",
+            "type": "shell"
+        },
+        {
+            "key": "│           │\u001b[11D\u001b[33m󰍛 cpu",
+            "type": "cpu"
+        },
+        {
+            "key": "│           │\u001b[11D\u001b[34m󰉉 disk",
+            "type": "disk",
+            "folders": "/"
+        },
+        {
+            "key": "│           │\u001b[11D\u001b[35m memory",
+            "type": "memory"
+        },
+        {
+            "key": "│           │\u001b[11D\u001b[36m󰩟 network",
+            "type": "localip",
+            "format": "{1} ({4})"
+        },
+        {
+            "key": "├───────────┤",
+            "type": "custom"
+        },
+        {
+            "key": "│           │\u001b[11D\u001b[m colors",
+            "type": "colors",
+            "symbol": "circle"
+        },
+        {
+            "key": "╰───────────╯",
+            "type": "custom"
+        }
+    ]
+}

presets/examples/2.jsonc

@@ -19,15 +19,15 @@
         },
         {
             "type": "host",
-            "key": "  "
+            "key": "  󰌢"
         },
         {
             "type": "cpu",
-            "key": "  "
+            "key": "  󰻠"
         },
         {
             "type": "gpu",
-            "key": "  ﬙"
+            "key": "  󰍛"
         },
         {
             "type": "disk",

presets/examples/5.jsonc

@@ -9,13 +9,11 @@
     "modules": [
         {
             "type": "theme",
-            "key": "T",
-            "format": "{7}"
+            "key": "T"
         },
         {
             "type": "icons",
-            "key": "I",
-            "format": "{5}"
+            "key": "I"
         },
         {
             "type": "font",

presets/examples/6.jsonc

@@ -15,17 +15,17 @@
     "modules": [
         {
             "type": "host",
-            "key": "╭─",
+            "key": "╭─󰌢",
             "keyColor": "green"
         },
         {
             "type": "cpu",
-            "key": "├─",
+            "key": "├─󰻠",
             "keyColor": "green"
         },
         {
             "type": "gpu",
-            "key": "├─﬙",
+            "key": "├─󰍛",
             "keyColor": "green"
         },
         {

presets/examples/7.jsonc

@@ -77,17 +77,17 @@
         "break",
         {
             "type": "host",
-            "key": " PC",
+            "key": "󰌢 PC",
             "keyColor": "green"
         },
         {
             "type": "cpu",
-            "key": "├",
+            "key": "├󰻠",
             "keyColor": "green"
         },
         {
             "type": "gpu",
-            "key": "├﬙",
+            "key": "├󰍛",
             "keyColor": "green"
         },
         {

presets/examples/8.jsonc

@@ -24,24 +24,24 @@
         },
         {
             "type": "os",
-            "key": "",
+            "key": "",
             "format": "{2} {8}"
         },
         {
             "type": "kernel",
-            "key": ""
+            "key": ""
         },
         {
             "type": "memory",
-            "key": ""
+            "key": ""
         },
         {
             "type": "packages",
-            "key": ""
+            "key": "󰏖"
         },
         {
             "type": "uptime",
-            "key": ""
+            "key": "󰅐"
         },
         {
             "type": "custom",

presets/hardware.jsonc

@@ -1,25 +1,37 @@
 {
     "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
-    "logo": {
-        "type": "builtin",
-        "source": "arch"
-    },
     "modules": [
-        "host",
-        "display",
+	    {
+		    "type": "host",
+			"format": "{?2}{2}{?}{?5} ({5}){?}"
+		},
+		"chassis",
+		{
+		    "type": "board",
+			"format": "{?1}{1}{?}{?2} ({2}){?}"
+		},
         "cpu",
-        "gpu",
         {
             "type": "memory",
             "format": "{?2}{2}{?}"
         },
-        {
-            "type": "disk",
-            "format": "{?2}{2}{?}"
-        },
+		"physicaldisk",
+		"gpu",
+	    "display",
+		"monitor",
+		{
+		    "type": "wifi",
+			"format": "{?1}{1}{?}{?6} - {6}{?}"
+		},
+	    {
+		    "type": "sound",
+			"format": "{?2}{2}{?}"
+		},
+		"camera",
         {
             "type": "battery",
-            "format": "{?1}{1} {?}{?2}{2} {?}{?3}({3}){?}"
-        }
+            "format": "{?1}{1}{?}{?2} {2}{?}{?3} ({3}){?}"
+        },
+		"poweradapter"
     ]
 }

presets/neofetch.jsonc

@@ -1,16 +1,16 @@
 {
     "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
+    "display": {
+        "size": {
+            "maxPrefix": "MB",
+            "ndigits": 0
+        }
+    },
     "modules": [
         "title",
         "separator",
-        {
-            "type": "os",
-            "format": "{3} {12}"
-        },
-        {
-            "type": "host",
-            "format": "{/2}{-}{/}{2}{?3} {3}{?}"
-        },
+        "os",
+        "host",
         "kernel",
         "uptime",
         "packages",
@@ -23,10 +23,7 @@
         "de",
         "wm",
         "wmtheme",
-        {
-            "type": "theme",
-            "format": "{?1}{1}{?3} {3}{?} [Plasma], {?}{7}"
-        },
+        "theme",
         "icons",
         "terminal",
         {

presets/paleofetch.jsonc

@@ -12,7 +12,7 @@
         "uptime",
         {
             "type": "battery",
-            "format": "{/4}{-}{/}{4}%{?5} [{5}]{?}"
+            "format": "{/4}{-}{/}{4}{?5} [{5}]{?}"
         },
         "break",
         "packages",

src/3rdparty/igcl/igcl_api.h

@@ -1229,6 +1229,18 @@ typedef struct _ctl_lda_args_t ctl_lda_args_t;
 /// @brief Forward-declare ctl_dce_args_t
 typedef struct _ctl_dce_args_t ctl_dce_args_t;
 
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Forward-declare ctl_wire_format_t
+typedef struct _ctl_wire_format_t ctl_wire_format_t;
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Forward-declare ctl_get_set_wire_format_config_t
+typedef struct _ctl_get_set_wire_format_config_t ctl_get_set_wire_format_config_t;
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Forward-declare ctl_display_settings_t
+typedef struct _ctl_display_settings_t ctl_display_settings_t;
+
 ///////////////////////////////////////////////////////////////////////////////
 /// @brief Forward-declare ctl_engine_properties_t
 typedef struct _ctl_engine_properties_t ctl_engine_properties_t;
@@ -2029,6 +2041,8 @@ typedef enum _ctl_std_display_feature_flag_t
     CTL_STD_DISPLAY_FEATURE_FLAG_VESA_COMPRESSION = CTL_BIT(4), ///< [out] Is display compression (VESA DSC) supported
     CTL_STD_DISPLAY_FEATURE_FLAG_HDR = CTL_BIT(5),  ///< [out] Is HDR supported
     CTL_STD_DISPLAY_FEATURE_FLAG_HDMI_QMS = CTL_BIT(6), ///< [out] Is HDMI QMS supported
+    CTL_STD_DISPLAY_FEATURE_FLAG_HDR10_PLUS_CERTIFIED = CTL_BIT(7), ///< [out] Is HDR10+ certified
+    CTL_STD_DISPLAY_FEATURE_FLAG_VESA_HDR_CERTIFIED = CTL_BIT(8),   ///< [out] Is VESA HDR certified - for future use
     CTL_STD_DISPLAY_FEATURE_FLAG_MAX = 0x80000000
 
 } ctl_std_display_feature_flag_t;
@@ -2042,6 +2056,7 @@ typedef enum _ctl_intel_display_feature_flag_t
     CTL_INTEL_DISPLAY_FEATURE_FLAG_DPST = CTL_BIT(0),   ///< [out] Is DPST supported
     CTL_INTEL_DISPLAY_FEATURE_FLAG_LACE = CTL_BIT(1),   ///< [out] Is LACE supported
     CTL_INTEL_DISPLAY_FEATURE_FLAG_DRRS = CTL_BIT(2),   ///< [out] Is DRRS supported
+    CTL_INTEL_DISPLAY_FEATURE_FLAG_ARC_ADAPTIVE_SYNC_CERTIFIED = CTL_BIT(3),///< [out] Is Intel Arc certified adaptive sync display
     CTL_INTEL_DISPLAY_FEATURE_FLAG_MAX = 0x80000000
 
 } ctl_intel_display_feature_flag_t;
@@ -4398,6 +4413,232 @@ ctlGetSetDynamicContrastEnhancement(
     ctl_dce_args_t* pDceArgs                        ///< [in,out] Dynamic Contrast Enhancement arguments
     );
 
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Color model
+typedef enum _ctl_wire_format_color_model_t
+{
+    CTL_WIRE_FORMAT_COLOR_MODEL_RGB = 0,            ///< Color model RGB
+    CTL_WIRE_FORMAT_COLOR_MODEL_YCBCR_420 = 1,      ///< Color model YCBCR 420
+    CTL_WIRE_FORMAT_COLOR_MODEL_YCBCR_422 = 2,      ///< Color model YCBCR 422
+    CTL_WIRE_FORMAT_COLOR_MODEL_YCBCR_444 = 3,      ///< Color model YCBCR 444
+    CTL_WIRE_FORMAT_COLOR_MODEL_MAX
+
+} ctl_wire_format_color_model_t;
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Operation type
+typedef enum _ctl_wire_format_operation_type_t
+{
+    CTL_WIRE_FORMAT_OPERATION_TYPE_GET = 0,         ///< Get request
+    CTL_WIRE_FORMAT_OPERATION_TYPE_SET = 1,         ///< Set request
+    CTL_WIRE_FORMAT_OPERATION_TYPE_RESTORE_DEFAULT = 2, ///< Restore to default values
+    CTL_WIRE_FORMAT_OPERATION_TYPE_MAX
+
+} ctl_wire_format_operation_type_t;
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Wire Format
+typedef struct _ctl_wire_format_t
+{
+    uint32_t Size;                                  ///< [in] size of this structure
+    uint8_t Version;                                ///< [in] version of this structure
+    ctl_wire_format_color_model_t ColorModel;       ///< [in,out] Color model
+    ctl_output_bpc_flags_t ColorDepth;              ///< [in,out] Color Depth
+
+} ctl_wire_format_t;
+
+///////////////////////////////////////////////////////////////////////////////
+#ifndef CTL_MAX_WIREFORMAT_COLOR_MODELS_SUPPORTED
+/// @brief Maximum Wire Formats Supported
+#define CTL_MAX_WIREFORMAT_COLOR_MODELS_SUPPORTED  4
+#endif // CTL_MAX_WIREFORMAT_COLOR_MODELS_SUPPORTED
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Get Set Wire Format
+typedef struct _ctl_get_set_wire_format_config_t
+{
+    uint32_t Size;                                  ///< [in] size of this structure
+    uint8_t Version;                                ///< [in] version of this structure
+    ctl_wire_format_operation_type_t Operation;     ///< [in] Get/Set Operation
+    ctl_wire_format_t SupportedWireFormat[CTL_MAX_WIREFORMAT_COLOR_MODELS_SUPPORTED];   ///< [out] Array of WireFormats supported
+    ctl_wire_format_t WireFormat;                   ///< [in,out]  Current/Requested WireFormat based on Operation. During SET
+                                                    ///< Operation, if multiple bpc is set, the MIN bpc will be applied
+
+} ctl_get_set_wire_format_config_t;
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Get/Set Color Format and Color Depth
+/// 
+/// @details
+///     - Get and Set the Color Format and Color Depth of a target
+/// 
+/// @returns
+///     - CTL_RESULT_SUCCESS
+///     - CTL_RESULT_ERROR_UNINITIALIZED
+///     - CTL_RESULT_ERROR_DEVICE_LOST
+///     - CTL_RESULT_ERROR_INVALID_NULL_HANDLE
+///         + `nullptr == hDisplayOutput`
+///     - CTL_RESULT_ERROR_INVALID_NULL_POINTER
+///         + `nullptr == pGetSetWireFormatSetting`
+///     - ::CTL_RESULT_ERROR_UNSUPPORTED_VERSION - "Unsupported version"
+///     - ::CTL_RESULT_ERROR_INVALID_ARGUMENT - "Invalid data passed as argument, WireFormat is not supported"
+///     - ::CTL_RESULT_ERROR_DISPLAY_NOT_ACTIVE - "Display not active"
+///     - ::CTL_RESULT_ERROR_INVALID_OPERATION_TYPE - "Invalid operation type"
+///     - ::CTL_RESULT_ERROR_NULL_OS_DISPLAY_OUTPUT_HANDLE - "Null OS display output handle"
+///     - ::CTL_RESULT_ERROR_NULL_OS_INTERFACE - "Null OS interface"
+///     - ::CTL_RESULT_ERROR_NULL_OS_ADAPATER_HANDLE - "Null OS adapter handle"
+CTL_APIEXPORT ctl_result_t CTL_APICALL
+ctlGetSetWireFormat(
+    ctl_display_output_handle_t hDisplayOutput,     ///< [in][release] Handle to display output
+    ctl_get_set_wire_format_config_t* pGetSetWireFormatSetting  ///< [in][release] Get/Set Wire Format settings to be fetched/applied
+    );
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Various display settings
+typedef uint32_t ctl_display_setting_flags_t;
+typedef enum _ctl_display_setting_flag_t
+{
+    CTL_DISPLAY_SETTING_FLAG_LOW_LATENCY = CTL_BIT(0),  ///< Low latency
+    CTL_DISPLAY_SETTING_FLAG_SOURCE_TM = CTL_BIT(1),///< Source tone mapping
+    CTL_DISPLAY_SETTING_FLAG_CONTENT_TYPE = CTL_BIT(2), ///< Content type
+    CTL_DISPLAY_SETTING_FLAG_QUANTIZATION_RANGE = CTL_BIT(3),   ///< Quantization range, full range or limited range
+    CTL_DISPLAY_SETTING_FLAG_PICTURE_AR = CTL_BIT(4),   ///< Picture aspect ratio
+    CTL_DISPLAY_SETTING_FLAG_AUDIO = CTL_BIT(5),    ///< Audio settings
+    CTL_DISPLAY_SETTING_FLAG_MAX = 0x80000000
+
+} ctl_display_setting_flag_t;
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Low latency setting
+typedef enum _ctl_display_setting_low_latency_t
+{
+    CTL_DISPLAY_SETTING_LOW_LATENCY_DEFAULT = 0,    ///< Default
+    CTL_DISPLAY_SETTING_LOW_LATENCY_DISABLED = 1,   ///< Disabled
+    CTL_DISPLAY_SETTING_LOW_LATENCY_ENABLED = 2,    ///< Enabled
+    CTL_DISPLAY_SETTING_LOW_LATENCY_MAX
+
+} ctl_display_setting_low_latency_t;
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Source tone mapping setting
+typedef enum _ctl_display_setting_sourcetm_t
+{
+    CTL_DISPLAY_SETTING_SOURCETM_DEFAULT = 0,       ///< Default
+    CTL_DISPLAY_SETTING_SOURCETM_DISABLED = 1,      ///< Disabled
+    CTL_DISPLAY_SETTING_SOURCETM_ENABLED = 2,       ///< Enabled
+    CTL_DISPLAY_SETTING_SOURCETM_MAX
+
+} ctl_display_setting_sourcetm_t;
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Content type settings
+typedef enum _ctl_display_setting_content_type_t
+{
+    CTL_DISPLAY_SETTING_CONTENT_TYPE_DEFAULT = 0,   ///< Default content type used by driver. Driver will use internal
+                                                    ///< techniques to determine content type and indicate to panel
+    CTL_DISPLAY_SETTING_CONTENT_TYPE_DISABLED = 1,  ///< Content type indication is disabled
+    CTL_DISPLAY_SETTING_CONTENT_TYPE_DESKTOP = 2,   ///< Typical desktop with a mix of text and graphics
+    CTL_DISPLAY_SETTING_CONTENT_TYPE_MEDIA = 3,     ///< Video or media content
+    CTL_DISPLAY_SETTING_CONTENT_TYPE_GAMING = 4,    ///< Gaming content
+    CTL_DISPLAY_SETTING_CONTENT_TYPE_MAX
+
+} ctl_display_setting_content_type_t;
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Quantization range
+typedef enum _ctl_display_setting_quantization_range_t
+{
+    CTL_DISPLAY_SETTING_QUANTIZATION_RANGE_DEFAULT = 0, ///< Default based on video format
+    CTL_DISPLAY_SETTING_QUANTIZATION_RANGE_LIMITED_RANGE = 1,   ///< Limited range
+    CTL_DISPLAY_SETTING_QUANTIZATION_RANGE_FULL_RANGE = 2,  ///< Full range
+    CTL_DISPLAY_SETTING_QUANTIZATION_RANGE_MAX
+
+} ctl_display_setting_quantization_range_t;
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Picture aspect ratio
+typedef uint32_t ctl_display_setting_picture_ar_flags_t;
+typedef enum _ctl_display_setting_picture_ar_flag_t
+{
+    CTL_DISPLAY_SETTING_PICTURE_AR_FLAG_DEFAULT = CTL_BIT(0),   ///< Default picture aspect ratio
+    CTL_DISPLAY_SETTING_PICTURE_AR_FLAG_DISABLED = CTL_BIT(1),  ///< Picture aspect ratio indication is explicitly disabled
+    CTL_DISPLAY_SETTING_PICTURE_AR_FLAG_AR_4_3 = CTL_BIT(2),///< Aspect ratio of 4:3
+    CTL_DISPLAY_SETTING_PICTURE_AR_FLAG_AR_16_9 = CTL_BIT(3),   ///< Aspect ratio of 16:9
+    CTL_DISPLAY_SETTING_PICTURE_AR_FLAG_AR_64_27 = CTL_BIT(4),  ///< Aspect ratio of 64:27 or 21:9 anamorphic
+    CTL_DISPLAY_SETTING_PICTURE_AR_FLAG_AR_256_135 = CTL_BIT(5),///< Aspect ratio of 256:135
+    CTL_DISPLAY_SETTING_PICTURE_AR_FLAG_MAX = 0x80000000
+
+} ctl_display_setting_picture_ar_flag_t;
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Audio settings
+typedef enum _ctl_display_setting_audio_t
+{
+    CTL_DISPLAY_SETTING_AUDIO_DEFAULT = 0,          ///< Default audio settings, always enumerated and enabled if display
+                                                    ///< supports it
+    CTL_DISPLAY_SETTING_AUDIO_DISABLED = 1,         ///< Forcefully disable display audio end point enumeration to OS
+    CTL_DISPLAY_SETTING_AUDIO_MAX
+
+} ctl_display_setting_audio_t;
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Get/Set end display settings
+typedef struct _ctl_display_settings_t
+{
+    uint32_t Size;                                  ///< [in] size of this structure
+    uint8_t Version;                                ///< [in] version of this structure
+    bool Set;                                       ///< [in] Flag to indicate Set or Get operation. Default option for all
+                                                    ///< features are reserved for Set=true calls, which will reset the setting
+                                                    ///< to driver defaults.
+    ctl_display_setting_flags_t SupportedFlags;     ///< [out] Display setting flags supported by the display.
+    ctl_display_setting_flags_t ControllableFlags;  ///< [out] Display setting flags which can be controlled by the caller.
+                                                    ///< Features which doesn't have this flag set cannot be changed by caller.
+    ctl_display_setting_flags_t ValidFlags;         ///< [in,out] Display setting flags which caller can use to indicate the
+                                                    ///< features it's interested in. This cannot have a bit set which is not
+                                                    ///< supported by SupportedFlags and ControllableFlags.
+    ctl_display_setting_low_latency_t LowLatency;   ///< [in,out] Low latency state of panel. For HDR10+ Gaming this need to be
+                                                    ///< in ENABLED state.
+    ctl_display_setting_sourcetm_t SourceTM;        ///< [in,out] Source tone mapping state known to panel. For HDR10+ Gaming
+                                                    ///< this need to be in ENABLED state.
+    ctl_display_setting_content_type_t ContentType; ///< [in,out] Source content type known to panel.
+    ctl_display_setting_quantization_range_t QuantizationRange; ///< [in,out] Quantization range
+    ctl_display_setting_picture_ar_flags_t SupportedPictureAR;  ///< [out] Supported Picture aspect ratios
+    ctl_display_setting_picture_ar_flag_t PictureAR;///< [in,out] Picture aspect ratio
+    ctl_display_setting_audio_t AudioSettings;      ///< [in,out] Audio settings
+    uint32_t Reserved[25];                          ///< [out] Reserved fields for future enumerations
+
+} ctl_display_settings_t;
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Get/Set Display settings
+/// 
+/// @details
+///     - To get/set end display settings like low latency, HDR10+ signaling
+///       etc. which are controlled via info-frames/secondary data packets
+/// 
+/// @returns
+///     - CTL_RESULT_SUCCESS
+///     - CTL_RESULT_ERROR_UNINITIALIZED
+///     - CTL_RESULT_ERROR_DEVICE_LOST
+///     - CTL_RESULT_ERROR_INVALID_NULL_HANDLE
+///         + `nullptr == hDisplayOutput`
+///     - CTL_RESULT_ERROR_INVALID_NULL_POINTER
+///         + `nullptr == pDisplaySettings`
+///     - ::CTL_RESULT_ERROR_UNSUPPORTED_VERSION - "Unsupported version"
+///     - ::CTL_RESULT_ERROR_NULL_OS_DISPLAY_OUTPUT_HANDLE - "Null OS display output handle"
+///     - ::CTL_RESULT_ERROR_NULL_OS_INTERFACE - "Null OS interface"
+///     - ::CTL_RESULT_ERROR_NULL_OS_ADAPATER_HANDLE - "Null OS adapter handle"
+///     - ::CTL_RESULT_ERROR_KMD_CALL - "Kernel mode driver call failure"
+///     - ::CTL_RESULT_ERROR_INVALID_NULL_HANDLE - "Invalid or Null handle passed"
+///     - ::CTL_RESULT_ERROR_INVALID_NULL_POINTER - "Invalid null pointer"
+///     - ::CTL_RESULT_ERROR_INVALID_OPERATION_TYPE - "Invalid operation type"
+///     - ::CTL_RESULT_ERROR_INVALID_ARGUMENT - "Invalid combination of parameters"
+CTL_APIEXPORT ctl_result_t CTL_APICALL
+ctlGetSetDisplaySettings(
+    ctl_display_output_handle_t hDisplayOutput,     ///< [in] Handle to display output
+    ctl_display_settings_t* pDisplaySettings        ///< [in,out] End display capabilities
+    );
+
 
 #if !defined(__GNUC__)
 #pragma endregion // display
@@ -7229,6 +7470,22 @@ typedef ctl_result_t (CTL_APICALL *ctl_pfnGetSetDynamicContrastEnhancement_t)(
     );
 
 
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Function-pointer for ctlGetSetWireFormat 
+typedef ctl_result_t (CTL_APICALL *ctl_pfnGetSetWireFormat_t)(
+    ctl_display_output_handle_t,
+    ctl_get_set_wire_format_config_t*
+    );
+
+
+///////////////////////////////////////////////////////////////////////////////
+/// @brief Function-pointer for ctlGetSetDisplaySettings 
+typedef ctl_result_t (CTL_APICALL *ctl_pfnGetSetDisplaySettings_t)(
+    ctl_display_output_handle_t,
+    ctl_display_settings_t*
+    );
+
+
 ///////////////////////////////////////////////////////////////////////////////
 /// @brief Function-pointer for ctlEnumEngineGroups 
 typedef ctl_result_t (CTL_APICALL *ctl_pfnEnumEngineGroups_t)(

src/3rdparty/igcl/repo.json

@@ -1,6 +1,6 @@
 {
     "home": "https://github.com/intel/drivers.gpu.control-library",
     "license": "./LICENSE",
-    "version": "e1776b7be2ceead1296204371447b27860d25a66",
+    "version": "v184",
     "author": "Intel Corporation"
 }

src/3rdparty/nvml/repo.json

@@ -1,6 +0,0 @@
-{
-    "home": "https://github.com/NVIDIA/nvidia-settings/blob/main/src/nvml.h",
-    "license": "Embed in source",
-    "version": "545.23.06",
-    "author": "NVIDIA Corporation"
-}

src/3rdparty/yyjson/repo.json

@@ -1,6 +1,6 @@
 {
     "home": "https://github.com/ibireme/yyjson",
     "license": "MIT ( embed in source )",
-    "version": "0.8.0",
+    "version": "0.9.0",
     "author": "ibireme"
 }

src/3rdparty/yyjson/yyjson.c

@@ -1407,6 +1407,7 @@ bool yyjson_mut_doc_set_val_pool_size(yyjson_mut_doc *doc, size_t count) {
 void yyjson_mut_doc_free(yyjson_mut_doc *doc) {
     if (doc) {
         yyjson_alc alc = doc->alc;
+        memset(&doc->alc, 0, sizeof(alc));
         unsafe_yyjson_str_pool_release(&doc->str_pool, &alc);
         unsafe_yyjson_val_pool_release(&doc->val_pool, &alc);
         alc.free(alc.ctx, doc);
@@ -8309,13 +8310,15 @@ static_inline u8 *yyjson_write_single(yyjson_val *val,
     bool cpy = (enc_table == enc_table_cpy);
     bool esc = has_write_flag(ESCAPE_UNICODE) != 0;
     bool inv = has_write_flag(ALLOW_INVALID_UNICODE) != 0;
+    bool newline = has_write_flag(NEWLINE_AT_END) != 0;
+    const usize end_len = 2; /* '\n' and '\0' */
     
     switch (unsafe_yyjson_get_type(val)) {
         case YYJSON_TYPE_RAW:
             str_len = unsafe_yyjson_get_len(val);
             str_ptr = (const u8 *)unsafe_yyjson_get_str(val);
             check_str_len(str_len);
-            incr_len(str_len + 1);
+            incr_len(str_len + end_len);
             cur = write_raw(cur, str_ptr, str_len);
             break;
             
@@ -8323,7 +8326,7 @@ static_inline u8 *yyjson_write_single(yyjson_val *val,
             str_len = unsafe_yyjson_get_len(val);
             str_ptr = (const u8 *)unsafe_yyjson_get_str(val);
             check_str_len(str_len);
-            incr_len(str_len * 6 + 4);
+            incr_len(str_len * 6 + 2 + end_len);
             if (likely(cpy) && unsafe_yyjson_get_subtype(val)) {
                 cur = write_string_noesc(cur, str_ptr, str_len);
             } else {
@@ -8333,7 +8336,7 @@ static_inline u8 *yyjson_write_single(yyjson_val *val,
             break;
             
         case YYJSON_TYPE_NUM:
-            incr_len(32);
+            incr_len(32 + end_len);
             cur = write_number(cur, val, flg);
             if (unlikely(!cur)) goto fail_num;
             break;
@@ -8349,13 +8352,13 @@ static_inline u8 *yyjson_write_single(yyjson_val *val,
             break;
             
         case YYJSON_TYPE_ARR:
-            incr_len(4);
+            incr_len(2 + end_len);
             byte_copy_2(cur, "[]");
             cur += 2;
             break;
             
         case YYJSON_TYPE_OBJ:
-            incr_len(4);
+            incr_len(2 + end_len);
             byte_copy_2(cur, "{}");
             cur += 2;
             break;
@@ -8364,6 +8367,7 @@ static_inline u8 *yyjson_write_single(yyjson_val *val,
             goto fail_type;
     }
     
+    if (newline) *cur++ = '\n';
     *cur = '\0';
     *dat_len = (usize)(cur - hdr);
     memset(err, 0, sizeof(yyjson_write_err));
@@ -8436,6 +8440,7 @@ static_inline u8 *yyjson_write_minify(const yyjson_val *root,
     bool cpy = (enc_table == enc_table_cpy);
     bool esc = has_write_flag(ESCAPE_UNICODE) != 0;
     bool inv = has_write_flag(ALLOW_INVALID_UNICODE) != 0;
+    bool newline = has_write_flag(NEWLINE_AT_END) != 0;
     
     alc_len = root->uni.ofs / sizeof(yyjson_val);
     alc_len = alc_len * YYJSON_WRITER_ESTIMATED_MINIFY_RATIO + 64;
@@ -8542,6 +8547,11 @@ ctn_end:
     }
     
 doc_end:
+    if (newline) {
+        incr_len(2);
+        *(cur - 1) = '\n';
+        cur++;
+    }
     *--cur = '\0';
     *dat_len = (usize)(cur - hdr);
     memset(err, 0, sizeof(yyjson_write_err));
@@ -8615,6 +8625,7 @@ static_inline u8 *yyjson_write_pretty(const yyjson_val *root,
     bool esc = has_write_flag(ESCAPE_UNICODE) != 0;
     bool inv = has_write_flag(ALLOW_INVALID_UNICODE) != 0;
     usize spaces = has_write_flag(PRETTY_TWO_SPACES) ? 2 : 4;
+    bool newline = has_write_flag(NEWLINE_AT_END) != 0;
     
     alc_len = root->uni.ofs / sizeof(yyjson_val);
     alc_len = alc_len * YYJSON_WRITER_ESTIMATED_PRETTY_RATIO + 64;
@@ -8745,6 +8756,10 @@ ctn_end:
     }
     
 doc_end:
+    if (newline) {
+        incr_len(2);
+        *cur++ = '\n';
+    }
     *cur = '\0';
     *dat_len = (usize)(cur - hdr);
     memset(err, 0, sizeof(yyjson_write_err));
@@ -8977,6 +8992,7 @@ static_inline u8 *yyjson_mut_write_minify(const yyjson_mut_val *root,
     bool cpy = (enc_table == enc_table_cpy);
     bool esc = has_write_flag(ESCAPE_UNICODE) != 0;
     bool inv = has_write_flag(ALLOW_INVALID_UNICODE) != 0;
+    bool newline = has_write_flag(NEWLINE_AT_END) != 0;
     
     alc_len = estimated_val_num * YYJSON_WRITER_ESTIMATED_MINIFY_RATIO + 64;
     alc_len = size_align_up(alc_len, sizeof(yyjson_mut_write_ctx));
@@ -9087,6 +9103,11 @@ ctn_end:
     }
     
 doc_end:
+    if (newline) {
+        incr_len(2);
+        *(cur - 1) = '\n';
+        cur++;
+    }
     *--cur = '\0';
     *dat_len = (usize)(cur - hdr);
     err->code = YYJSON_WRITE_SUCCESS;
@@ -9162,6 +9183,7 @@ static_inline u8 *yyjson_mut_write_pretty(const yyjson_mut_val *root,
     bool esc = has_write_flag(ESCAPE_UNICODE) != 0;
     bool inv = has_write_flag(ALLOW_INVALID_UNICODE) != 0;
     usize spaces = has_write_flag(PRETTY_TWO_SPACES) ? 2 : 4;
+    bool newline = has_write_flag(NEWLINE_AT_END) != 0;
     
     alc_len = estimated_val_num * YYJSON_WRITER_ESTIMATED_PRETTY_RATIO + 64;
     alc_len = size_align_up(alc_len, sizeof(yyjson_mut_write_ctx));
@@ -9296,6 +9318,10 @@ ctn_end:
     }
     
 doc_end:
+    if (newline) {
+        incr_len(2);
+        *cur++ = '\n';
+    }
     *cur = '\0';
     *dat_len = (usize)(cur - hdr);
     err->code = YYJSON_WRITE_SUCCESS;

src/3rdparty/yyjson/yyjson.h

@@ -527,16 +527,16 @@ extern "C" {
 #define YYJSON_VERSION_MAJOR  0
 
 /** The minor version of yyjson. */
-#define YYJSON_VERSION_MINOR  8
+#define YYJSON_VERSION_MINOR  9
 
 /** The patch version of yyjson. */
 #define YYJSON_VERSION_PATCH  0
 
 /** The version of yyjson in hex: `(major << 16) | (minor << 8) | (patch)`. */
-#define YYJSON_VERSION_HEX    0x000800
+#define YYJSON_VERSION_HEX    0x000900
 
 /** The version string of yyjson. */
-#define YYJSON_VERSION_STRING "0.8.0"
+#define YYJSON_VERSION_STRING "0.9.0"
 
 /** The version of yyjson in hex, same as `YYJSON_VERSION_HEX`. */
 yyjson_api uint32_t yyjson_version(void);
@@ -738,7 +738,7 @@ typedef uint32_t yyjson_read_flag;
     - Report error if double number is infinity.
     - Report error if string contains invalid UTF-8 character or BOM.
     - Report error on trailing commas, comments, inf and nan literals. */
-static const yyjson_read_flag YYJSON_READ_NOFLAG                = 0 << 0;
+static const yyjson_read_flag YYJSON_READ_NOFLAG                = 0;
 
 /** Read the input data in-situ.
     This option allows the reader to modify and use input data to store string
@@ -1067,7 +1067,7 @@ typedef uint32_t yyjson_write_flag;
     - Report error on inf or nan number.
     - Report error on invalid UTF-8 string.
     - Do not escape unicode or slash. */
-static const yyjson_write_flag YYJSON_WRITE_NOFLAG                  = 0 << 0;
+static const yyjson_write_flag YYJSON_WRITE_NOFLAG                  = 0;
 
 /** Write JSON pretty with 4 space indent. */
 static const yyjson_write_flag YYJSON_WRITE_PRETTY                  = 1 << 0;
@@ -1096,6 +1096,10 @@ static const yyjson_write_flag YYJSON_WRITE_ALLOW_INVALID_UNICODE   = 1 << 5;
     This flag will override `YYJSON_WRITE_PRETTY` flag. */
 static const yyjson_write_flag YYJSON_WRITE_PRETTY_TWO_SPACES       = 1 << 6;
 
+/** Adds a newline character `\n` at the end of the JSON.
+    This can be helpful for text editors or NDJSON. */
+static const yyjson_write_flag YYJSON_WRITE_NEWLINE_AT_END          = 1 << 7;
+
 
 
 /** Result code for JSON writer */
@@ -3695,7 +3699,7 @@ yyjson_api_inline bool yyjson_mut_obj_add_strcpy(yyjson_mut_doc *doc,
     The `len` should be the length of the `val`, in bytes.
     This function allows duplicated key in one object.
     
-    @warning The key/value strings are not copied, you should keep these strings
+    @warning The key strings are not copied, you should keep these strings
         unmodified for the lifetime of this JSON document. */
 yyjson_api_inline bool yyjson_mut_obj_add_strncpy(yyjson_mut_doc *doc,
                                                   yyjson_mut_val *obj,
@@ -4829,6 +4833,7 @@ yyjson_api_inline size_t yyjson_doc_get_val_count(yyjson_doc *doc) {
 yyjson_api_inline void yyjson_doc_free(yyjson_doc *doc) {
     if (doc) {
         yyjson_alc alc = doc->alc;
+        memset(&doc->alc, 0, sizeof(alc));
         if (doc->str_pool) alc.free(alc.ctx, doc->str_pool);
         alc.free(alc.ctx, doc);
     }
@@ -5668,6 +5673,7 @@ yyjson_api_inline yyjson_mut_val *yyjson_mut_bool(yyjson_mut_doc *doc,
     if (yyjson_likely(doc)) {
         yyjson_mut_val *val = unsafe_yyjson_mut_val(doc, 1);
         if (yyjson_likely(val)) {
+            _val = !!_val;
             val->tag = YYJSON_TYPE_BOOL | (uint8_t)((uint8_t)_val << 3);
             return val;
         }
@@ -5920,7 +5926,8 @@ yyjson_api_inline yyjson_mut_val *yyjson_mut_arr(yyjson_mut_doc *doc) {
 yyjson_api_inline yyjson_mut_val *yyjson_mut_arr_with_bool(
     yyjson_mut_doc *doc, const bool *vals, size_t count) {
     yyjson_mut_arr_with_func({
-        val->tag = YYJSON_TYPE_BOOL | (uint8_t)((uint8_t)vals[i] << 3);
+        bool _val = !!vals[i];
+        val->tag = YYJSON_TYPE_BOOL | (uint8_t)((uint8_t)_val << 3);
     });
 }
 
@@ -6872,6 +6879,7 @@ yyjson_api_inline bool yyjson_mut_obj_add_bool(yyjson_mut_doc *doc,
                                                const char *_key,
                                                bool _val) {
     yyjson_mut_obj_add_func({
+        _val = !!_val;
         val->tag = YYJSON_TYPE_BOOL | (uint8_t)((uint8_t)(_val) << 3);
     });
 }
@@ -7730,33 +7738,39 @@ yyjson_api_inline bool yyjson_ptr_get_bool(
 }
 
 /**
- Set provided `value` if the JSON Pointer (RFC 6901) exists and is type uint.
- Returns true if value at `ptr` exists and is the correct type, otherwise false.
+ Set provided `value` if the JSON Pointer (RFC 6901) exists and is an integer
+ that fits in `uint64_t`. Returns true if successful, otherwise false.
  */
 yyjson_api_inline bool yyjson_ptr_get_uint(
     yyjson_val *root, const char *ptr, uint64_t *value) {
     yyjson_val *val = yyjson_ptr_get(root, ptr);
-    if (value && yyjson_is_uint(val)) {
-        *value = unsafe_yyjson_get_uint(val);
-        return true;
-    } else {
-        return false;
+    if (value && val) {
+        uint64_t ret = val->uni.u64;
+        if (unsafe_yyjson_is_uint(val) ||
+            (unsafe_yyjson_is_sint(val) && !(ret >> 63))) {
+            *value = ret;
+            return true;
+        }
     }
+    return false;
 }
 
 /**
- Set provided `value` if the JSON Pointer (RFC 6901) exists and is type sint.
- Returns true if value at `ptr` exists and is the correct type, otherwise false.
+ Set provided `value` if the JSON Pointer (RFC 6901) exists and is an integer
+ that fits in `int64_t`. Returns true if successful, otherwise false.
  */
 yyjson_api_inline bool yyjson_ptr_get_sint(
     yyjson_val *root, const char *ptr, int64_t *value) {
     yyjson_val *val = yyjson_ptr_get(root, ptr);
-    if (value && yyjson_is_sint(val)) {
-        *value = unsafe_yyjson_get_sint(val);
-        return true;
-    } else {
-        return false;
+    if (value && val) {
+        int64_t ret = val->uni.i64;
+        if (unsafe_yyjson_is_sint(val) ||
+            (unsafe_yyjson_is_uint(val) && ret >= 0)) {
+            *value = ret;
+            return true;
+        }
     }
+    return false;
 }
 
 /**

src/common/commandoption.c

@@ -11,7 +11,7 @@
 
 bool ffParseModuleOptions(const char* key, const char* value)
 {
-    if (!ffStrStartsWith(key, "--") || !isalpha(key[2])) return false;
+    if (!ffStrStartsWith(key, "--") || !ffCharIsEnglishAlphabet(key[2])) return false;
 
     for (FFModuleBaseInfo** modules = ffModuleInfos[toupper(key[2]) - 'A']; *modules; ++modules)
     {
@@ -26,7 +26,7 @@ void ffPrepareCommandOption(FFdata* data)
     FFOptionsModules* const options = &instance.config.modules;
     //If we don't have a custom structure, use the default one
     if(data->structure.length == 0)
-        ffStrbufAppendS(&data->structure, FASTFETCH_DATATEXT_STRUCTURE);
+        ffStrbufAppendS(&data->structure, FASTFETCH_DATATEXT_STRUCTURE); // Cannot use `ffStrbufSetStatic` here because we will modify the string
 
     if(ffStrbufContainIgnCaseS(&data->structure, FF_CPUUSAGE_MODULE_NAME))
         ffPrepareCPUUsage();
@@ -79,30 +79,11 @@ static void genJsonResult(FFModuleBaseInfo* baseInfo, yyjson_mut_doc* doc)
 
 static void parseStructureCommand(
     const char* line,
-    FFlist* customValues,
     void (*fn)(FFModuleBaseInfo *baseInfo, yyjson_mut_doc* jsonDoc),
     yyjson_mut_doc* jsonDoc
 )
 {
-    // handle `--set` and `--set-keyless`
-    FF_LIST_FOR_EACH(FFCustomValue, customValue, *customValues)
-    {
-        if (ffStrbufEqualS(&customValue->key, line))
-        {
-            __attribute__((__cleanup__(ffDestroyCustomOptions))) FFCustomOptions options;
-            ffInitCustomOptions(&options);
-            if (customValue->printKey)
-                ffStrbufAppend(&options.moduleArgs.key, &customValue->key);
-            ffStrbufAppend(&options.moduleArgs.outputFormat, &customValue->value);
-            if (__builtin_expect(jsonDoc != NULL, false))
-                fn((FFModuleBaseInfo*) &options, jsonDoc);
-            else
-                ffPrintCustom(&options);
-            return;
-        }
-    }
-
-    if(isalpha(line[0]))
+    if(ffCharIsEnglishAlphabet(line[0]))
     {
         for (FFModuleBaseInfo** modules = ffModuleInfos[toupper(line[0]) - 'A']; *modules; ++modules)
         {
@@ -118,7 +99,7 @@ static void parseStructureCommand(
         }
     }
 
-    ffPrintErrorString(line, 0, NULL, FF_PRINT_TYPE_NO_CUSTOM_KEY, "<no implementation provided>");
+    ffPrintError(line, 0, NULL, FF_PRINT_TYPE_NO_CUSTOM_KEY, "<no implementation provided>");
 }
 
 void ffPrintCommandOption(FFdata* data, yyjson_mut_doc* jsonDoc)
@@ -134,7 +115,7 @@ void ffPrintCommandOption(FFdata* data, yyjson_mut_doc* jsonDoc)
         if(instance.config.display.stat)
             ms = ffTimeGetTick();
 
-        parseStructureCommand(data->structure.chars + startIndex, &data->customValues, genJsonResult, jsonDoc);
+        parseStructureCommand(data->structure.chars + startIndex, genJsonResult, jsonDoc);
 
         if(instance.config.display.stat)
         {
@@ -168,7 +149,7 @@ void ffMigrateCommandOptionToJsonc(FFdata* data, yyjson_mut_doc* jsonDoc)
 {
     //If we don't have a custom structure, use the default one
     if(data->structure.length == 0)
-        ffStrbufAppendS(&data->structure, FASTFETCH_DATATEXT_STRUCTURE);
+        ffStrbufAppendS(&data->structure, FASTFETCH_DATATEXT_STRUCTURE); // Cannot use `ffStrbufSetStatic` here because we will modify the string
 
     //Parse the structure and call the modules
     uint32_t startIndex = 0;
@@ -177,7 +158,7 @@ void ffMigrateCommandOptionToJsonc(FFdata* data, yyjson_mut_doc* jsonDoc)
         uint32_t colonIndex = ffStrbufNextIndexC(&data->structure, startIndex, ':');
         data->structure.chars[colonIndex] = '\0';
 
-        parseStructureCommand(data->structure.chars + startIndex, &data->customValues, genJsonConfig, jsonDoc);
+        parseStructureCommand(data->structure.chars + startIndex, genJsonConfig, jsonDoc);
 
         startIndex = colonIndex + 1;
     }

src/common/commandoption.h

@@ -2,18 +2,10 @@
 
 #include "fastfetch.h"
 
-typedef struct FFCustomValue
-{
-    bool printKey;
-    FFstrbuf key;
-    FFstrbuf value;
-} FFCustomValue;
-
 // Things only needed by fastfetch
 typedef struct FFdata
 {
     FFstrbuf structure;
-    FFlist customValues; // List of FFCustomValue
     bool configLoaded;
 } FFdata;
 

src/common/dbus.c

@@ -181,22 +181,24 @@ DBusMessage* ffDBusGetProperty(FFDBusData* dbus, const char* busName, const char
     return reply;
 }
 
-void ffDBusGetPropertyString(FFDBusData* dbus, const char* busName, const char* objectPath, const char* interface, const char* property, FFstrbuf* result)
+bool ffDBusGetPropertyString(FFDBusData* dbus, const char* busName, const char* objectPath, const char* interface, const char* property, FFstrbuf* result)
 {
     DBusMessage* reply = ffDBusGetProperty(dbus, busName, objectPath, interface, property);
     if(reply == NULL)
-        return;
+        return false;
 
     DBusMessageIter rootIterator;
     if(!dbus->lib->ffdbus_message_iter_init(reply, &rootIterator))
     {
         dbus->lib->ffdbus_message_unref(reply);
-        return;
+        return false;
     }
 
-    ffDBusGetValue(dbus, &rootIterator, result);
+    bool ret = ffDBusGetValue(dbus, &rootIterator, result);
 
     dbus->lib->ffdbus_message_unref(reply);
+
+    return ret;
 }
 
 #endif //FF_HAVE_DBUS

src/common/dbus.h

@@ -48,6 +48,6 @@ bool ffDBusGetBool(FFDBusData* dbus, DBusMessageIter* iter, bool* result);
 bool ffDBusGetByte(FFDBusData* dbus, DBusMessageIter* iter, uint8_t* result);
 DBusMessage* ffDBusGetMethodReply(FFDBusData* dbus, const char* busName, const char* objectPath, const char* interface, const char* method);
 DBusMessage* ffDBusGetProperty(FFDBusData* dbus, const char* busName, const char* objectPath, const char* interface, const char* property);
-void ffDBusGetPropertyString(FFDBusData* dbus, const char* busName, const char* objectPath, const char* interface, const char* property, FFstrbuf* result);
+bool ffDBusGetPropertyString(FFDBusData* dbus, const char* busName, const char* objectPath, const char* interface, const char* property, FFstrbuf* result);
 
 #endif // FF_HAVE_DBUS

src/common/font.c

@@ -2,6 +2,7 @@
 #include "common/font.h"
 
 #include <string.h>
+#include <ctype.h>
 
 void ffFontInit(FFfont* font)
 {
@@ -66,59 +67,33 @@ void ffFontInitQt(FFfont* font, const char* data)
     //See https://doc.qt.io/qt-5/qfont.html#toString
 
     //Family
-    while(*data != ',' && *data != '\0')
-    {
-        ffStrbufAppendC(&font->name, *data);
-        ++data;
-    }
-    if(*data != '\0')
-        ++data;
+    data = ffStrbufAppendSUntilC(&font->name, data, ',');
     ffStrbufTrim(&font->name, ' ');
+    if (!data) goto exit;
+    data++;
 
     //Size
-    while(*data != ',' && *data != '\0')
-    {
-        ffStrbufAppendC(&font->size, *data);
-        ++data;
-    }
-    if(*data != '\0')
-        ++data;
+    data = ffStrbufAppendSUntilC(&font->size, data, ',');
     ffStrbufTrim(&font->size, ' ');
+    if (!data) goto exit;
+    data++;
 
-    #define FF_FONT_QT_SKIP_VALUE \
-        while(*data != ',' && *data != '\0') \
-            ++data; \
-        if(*data != '\0') \
-             ++data;
-
-    FF_FONT_QT_SKIP_VALUE //Pixel size
-    FF_FONT_QT_SKIP_VALUE //Style hint
-    FF_FONT_QT_SKIP_VALUE //Font weight
-    FF_FONT_QT_SKIP_VALUE //Font style
-    FF_FONT_QT_SKIP_VALUE //Underline
-    FF_FONT_QT_SKIP_VALUE //Strike out
-    FF_FONT_QT_SKIP_VALUE //Fixed pitch
-    FF_FONT_QT_SKIP_VALUE //Always 0
-
-    #undef FF_FONT_QT_SKIP_VALUE
-
-    while(*data != '\0')
+    //Style
+    data = strrchr(data, ',');
+    if (!data) goto exit;
+    data++;
+    if (isalpha(*data))
     {
-        while(*data == ' ')
-            ++data;
-
-        if(*data == '\0')
-            break;
-
-        FFstrbuf* style = ffListAdd(&font->styles);
-        ffStrbufInit(style);
-        while(*data != ' ' && *data != '\0')
+        do
         {
-            ffStrbufAppendC(style, *data);
-            ++data;
-        }
+            FFstrbuf* style = ffListAdd(&font->styles);
+            ffStrbufInit(style);
+            data = ffStrbufAppendSUntilC(style, data, ' ');
+            if (data) data++;
+        } while (data);
     }
 
+exit:
     fontInitPretty(font);
 }
 
@@ -211,6 +186,7 @@ void ffFontInitValues(FFfont* font, const char* name, const char* size)
     ffFontInit(font);
 
     ffStrbufAppendS(&font->name, name);
+    ffStrbufTrim(&font->name, '"');
     ffStrbufAppendS(&font->size, size);
 
     fontInitPretty(font);

src/common/format.h

@@ -24,3 +24,7 @@ typedef struct FFformatarg
 
 void ffFormatAppendFormatArg(FFstrbuf* buffer, const FFformatarg* formatarg);
 void ffParseFormatString(FFstrbuf* buffer, const FFstrbuf* formatstr, uint32_t numArgs, const FFformatarg* arguments);
+#define FF_PARSE_FORMAT_STRING_CHECKED(buffer, formatstr, numArgs, arguments) do {\
+    static_assert(sizeof(arguments) / sizeof(*(arguments)) == (numArgs), "Invalid number of format arguments");\
+    ffParseFormatString((buffer), (formatstr), (numArgs), (arguments));\
+} while (0)

src/common/init.c

@@ -163,9 +163,6 @@ void ffListFeatures(void)
         #ifdef FF_HAVE_THREADS
             "threads\n"
         #endif
-        #ifdef FF_HAVE_LIBPCI
-            "libpci\n"
-        #endif
         #ifdef FF_HAVE_VULKAN
             "vulkan\n"
         #endif
@@ -250,8 +247,11 @@ void ffListFeatures(void)
         #ifdef FF_USE_SYSTEM_YYJSON
             "System yyjson\n"
         #endif
-        #ifdef FF_USE_PCI_MEMORY
-            "PCI memory\n"
+        #if __has_include(<linux/videodev2.h>)
+            "linux/videodev2\n"
+        #endif
+        #if __has_include(<linux/wireless.h>)
+            "linux/wireless\n"
         #endif
         ""
     , stdout);

src/common/io/io_unix.c

@@ -1,6 +1,6 @@
 #include "io.h"
+#include "fastfetch.h"
 #include "util/stringUtils.h"
-#include "util/unused.h"
 
 #include <fcntl.h>
 #include <termios.h>
@@ -115,7 +115,7 @@ bool ffPathExpandEnv(FF_MAYBE_UNUSED const char* in, FF_MAYBE_UNUSED FFstrbuf* o
     #if __has_include(<wordexp.h>) // https://github.com/termux/termux-packages/pull/7056
 
     wordexp_t exp;
-    if(wordexp(in, &exp, WRDE_NOCMD) != 0)
+    if(wordexp(in, &exp, 0) != 0)
         return false;
 
     if (exp.we_wordc == 1)
@@ -133,6 +133,9 @@ bool ffPathExpandEnv(FF_MAYBE_UNUSED const char* in, FF_MAYBE_UNUSED FFstrbuf* o
 
 const char* ffGetTerminalResponse(const char* request, const char* format, ...)
 {
+    if (instance.config.display.pipe)
+        return "Not supported in --pipe mode";
+
     struct termios oldTerm, newTerm;
     if(tcgetattr(STDIN_FILENO, &oldTerm) == -1)
         return "tcgetattr(STDIN_FILENO, &oldTerm) failed";

src/common/io/io_windows.c

@@ -1,4 +1,5 @@
 #include "io.h"
+#include "fastfetch.h"
 #include "util/stringUtils.h"
 
 #include <windows.h>
@@ -174,6 +175,9 @@ void ffListFilesRecursively(const char* path, bool pretty)
 
 const char* ffGetTerminalResponse(const char* request, const char* format, ...)
 {
+    if (instance.config.display.pipe)
+        return "Not supported in --pipe mode";
+
     HANDLE hInput = GetStdHandle(STD_INPUT_HANDLE);
     DWORD prev_mode;
     GetConsoleMode(hInput, &prev_mode);

src/common/jsonconfig.c

@@ -22,6 +22,11 @@ bool ffJsonConfigParseModuleArgs(const char* key, yyjson_val* val, FFModuleArgs*
         ffStrbufSetNS(&moduleArgs->outputFormat, (uint32_t) yyjson_get_len(val), yyjson_get_str(val));
         return true;
     }
+    else if(ffStrEqualsIgnCase(key, "outputColor"))
+    {
+        ffOptionParseColor(yyjson_get_str(val), &moduleArgs->outputColor);
+        return true;
+    }
     else if(ffStrEqualsIgnCase(key, "keyColor"))
     {
         ffOptionParseColor(yyjson_get_str(val), &moduleArgs->keyColor);
@@ -94,7 +99,7 @@ static inline void genJsonResult(FFModuleBaseInfo* baseInfo, yyjson_mut_doc* doc
 
 static bool parseModuleJsonObject(const char* type, yyjson_val* jsonVal, yyjson_mut_doc* jsonDoc)
 {
-    if(!isalpha(type[0])) return false;
+    if(!ffCharIsEnglishAlphabet(type[0])) return false;
 
     for (FFModuleBaseInfo** modules = ffModuleInfos[toupper(type[0]) - 'A']; *modules; ++modules)
     {
@@ -235,6 +240,6 @@ void ffPrintJsonConfig(bool prepare, yyjson_mut_doc* jsonDoc)
             yyjson_mut_doc_set_root(jsonDoc, obj);
         }
         else
-            ffPrintErrorString("JsonConfig", 0, NULL, FF_PRINT_TYPE_NO_CUSTOM_KEY, "%s", error);
+            ffPrintError("JsonConfig", 0, NULL, FF_PRINT_TYPE_NO_CUSTOM_KEY, "%s", error);
     }
 }

src/common/library.c

@@ -4,7 +4,7 @@
 #include <stdarg.h>
 
 //Clang doesn't define __SANITIZE_ADDRESS__ but defines __has_feature(address_sanitizer)
-#if defined(__has_feature)
+#if !defined(__SANITIZE_ADDRESS__) && defined(__has_feature)
     #if __has_feature(address_sanitizer)
         #define __SANITIZE_ADDRESS__
     #endif

src/common/modules.c

@@ -9,12 +9,14 @@ static FFModuleBaseInfo* B[] = {
     (void*) &instance.config.modules.bios,
     (void*) &instance.config.modules.bluetooth,
     (void*) &instance.config.modules.board,
+    (void*) &instance.config.modules.bootmgr,
     (void*) &instance.config.modules.break_,
     (void*) &instance.config.modules.brightness,
     NULL,
 };
 
 static FFModuleBaseInfo* C[] = {
+    (void*) &instance.config.modules.camera,
     (void*) &instance.config.modules.chassis,
     (void*) &instance.config.modules.command,
     (void*) &instance.config.modules.colors,
@@ -35,6 +37,7 @@ static FFModuleBaseInfo* D[] = {
 };
 
 static FFModuleBaseInfo* E[] = {
+    (void*) &instance.config.modules.editor,
     NULL,
 };
 
@@ -70,6 +73,7 @@ static FFModuleBaseInfo* K[] = {
 
 static FFModuleBaseInfo* L[] = {
     (void*) &instance.config.modules.lm,
+    (void*) &instance.config.modules.loadavg,
     (void*) &instance.config.modules.locale,
     (void*) &instance.config.modules.localIP,
     NULL,
@@ -97,6 +101,7 @@ static FFModuleBaseInfo* O[] = {
 static FFModuleBaseInfo* P[] = {
     (void*) &instance.config.modules.packages,
     (void*) &instance.config.modules.physicalDisk,
+    (void*) &instance.config.modules.physicalMemory,
     (void*) &instance.config.modules.player,
     (void*) &instance.config.modules.powerAdapter,
     (void*) &instance.config.modules.processes,
@@ -124,6 +129,7 @@ static FFModuleBaseInfo* T[] = {
     (void*) &instance.config.modules.terminal,
     (void*) &instance.config.modules.terminalFont,
     (void*) &instance.config.modules.terminalSize,
+    (void*) &instance.config.modules.terminalTheme,
     (void*) &instance.config.modules.title,
     (void*) &instance.config.modules.theme,
     NULL,

src/common/networking.h

@@ -20,15 +20,10 @@ typedef struct FFNetworkingState {
             FFThreadType thread;
         #endif
     #endif
+
+    uint32_t timeout;
+    bool ipv6;
 } FFNetworkingState;
 
-bool ffNetworkingSendHttpRequest(FFNetworkingState* state, const char* host, const char* path, const char* headers);
-bool ffNetworkingRecvHttpResponse(FFNetworkingState* state, FFstrbuf* buffer, uint32_t timeout);
-
-static inline bool ffNetworkingGetHttp(const char* host, const char* path, uint32_t timeout, const char* headers, FFstrbuf* buffer)
-{
-    FFNetworkingState state;
-    if(ffNetworkingSendHttpRequest(&state, host, path, headers))
-        return ffNetworkingRecvHttpResponse(&state, buffer, timeout);
-    return false;
-}
+const char* ffNetworkingSendHttpRequest(FFNetworkingState* state, const char* host, const char* path, const char* headers);
+const char* ffNetworkingRecvHttpResponse(FFNetworkingState* state, FFstrbuf* buffer);

src/common/networking_linux.c

@@ -5,30 +5,50 @@
 #include <sys/time.h>
 #include <sys/socket.h>
 #include <netdb.h>
+#include <netinet/in.h> // For FreeBSD
+#include <netinet/tcp.h>
 
-static void connectAndSend(FFNetworkingState* state)
+static const char* connectAndSend(FFNetworkingState* state)
 {
-    struct addrinfo hints = {
-        .ai_family = AF_INET,
-        .ai_socktype = SOCK_STREAM,
-    };
-
+    const char* ret = NULL;
     struct addrinfo* addr;
 
-    if(getaddrinfo(state->host.chars, "80", &hints, &addr) != 0)
+    if(getaddrinfo(state->host.chars, "80", &(struct addrinfo) {
+        .ai_family = state->ipv6 ? AF_INET6 : AF_INET,
+        .ai_socktype = SOCK_STREAM,
+    }, &addr) != 0)
+    {
+        ret = "getaddrinfo() failed";
         goto error;
+    }
 
     state->sockfd = socket(addr->ai_family, addr->ai_socktype, addr->ai_protocol);
     if(state->sockfd == -1)
     {
         freeaddrinfo(addr);
+        ret = "socket() failed";
         goto error;
     }
 
+    if (state->timeout > 0)
+    {
+        FF_MAYBE_UNUSED uint32_t sec = state->timeout / 1000;
+        if (sec == 0) sec = 1;
+
+        #ifdef TCP_CONNECTIONTIMEOUT
+        setsockopt(state->sockfd, IPPROTO_TCP, TCP_CONNECTIONTIMEOUT, &sec, sizeof(sec));
+        #elif defined(TCP_KEEPINIT)
+        setsockopt(state->sockfd, IPPROTO_TCP, TCP_KEEPINIT, &sec, sizeof(sec));
+        #elif defined(TCP_USER_TIMEOUT)
+        setsockopt(state->sockfd, IPPROTO_TCP, TCP_USER_TIMEOUT, &state->timeout, sizeof(state->timeout));
+        #endif
+    }
+
     if(connect(state->sockfd, addr->ai_addr, addr->ai_addrlen) == -1)
     {
         close(state->sockfd);
         freeaddrinfo(addr);
+        ret = "connect() failed";
         goto error;
     }
 
@@ -37,6 +57,7 @@ static void connectAndSend(FFNetworkingState* state)
     if(send(state->sockfd, state->command.chars, state->command.length, 0) < 0)
     {
         close(state->sockfd);
+        ret = "send() failed";
         goto error;
     }
 
@@ -48,11 +69,13 @@ error:
 exit:
     ffStrbufDestroy(&state->host);
     ffStrbufDestroy(&state->command);
+
+    return ret;
 }
 
 FF_THREAD_ENTRY_DECL_WRAPPER(connectAndSend, FFNetworkingState*);
 
-bool ffNetworkingSendHttpRequest(FFNetworkingState* state, const char* host, const char* path, const char* headers)
+const char* ffNetworkingSendHttpRequest(FFNetworkingState* state, const char* host, const char* path, const char* headers)
 {
     ffStrbufInitS(&state->host, host);
 
@@ -66,22 +89,30 @@ bool ffNetworkingSendHttpRequest(FFNetworkingState* state, const char* host, con
     ffStrbufAppendS(&state->command, "\r\n");
 
     #ifdef FF_HAVE_THREADS
+    if (instance.config.general.multithreading)
+    {
         state->thread = ffThreadCreate(connectAndSendThreadMain, state);
-        return !!state->thread;
-    #else
-        connectAndSend(state);
-        return state->sockfd != -1;
+        return state->thread ? NULL : "ffThreadCreate(connectAndSend) failed";
+    }
     #endif
+
+    return connectAndSend(state);
 }
 
-bool ffNetworkingRecvHttpResponse(FFNetworkingState* state, FFstrbuf* buffer, uint32_t timeout)
+const char* ffNetworkingRecvHttpResponse(FFNetworkingState* state, FFstrbuf* buffer)
 {
+    uint32_t timeout = state->timeout;
+
     #ifdef FF_HAVE_THREADS
+    if (instance.config.general.multithreading)
+    {
         if (!ffThreadJoin(state->thread, timeout))
-            return false;
+            return "ffThreadJoin() failed or timeout";
+    }
     #endif
+
     if(state->sockfd == -1)
-        return false;
+        return "ffNetworkingSendHttpRequest() failed";
 
     if(timeout > 0)
     {
@@ -91,14 +122,15 @@ bool ffNetworkingRecvHttpResponse(FFNetworkingState* state, FFstrbuf* buffer, ui
         setsockopt(state->sockfd, SOL_SOCKET, SO_RCVTIMEO, &timev, sizeof(timev));
     }
 
-    ssize_t received = recv(state->sockfd, buffer->chars + buffer->length, ffStrbufGetFree(buffer), 0);
-
-    if(received > 0)
-    {
+    uint32_t recvStart;
+    do {
+        recvStart = buffer->length;
+        ssize_t received = recv(state->sockfd, buffer->chars + buffer->length, ffStrbufGetFree(buffer), 0);
+        if (received <= 0) break;
         buffer->length += (uint32_t) received;
         buffer->chars[buffer->length] = '\0';
-    }
+    } while (ffStrbufGetFree(buffer) > 0 && strstr(buffer->chars + recvStart, "\r\n\r\n") == NULL);
 
     close(state->sockfd);
-    return ffStrbufStartsWithS(buffer, "HTTP/1.1 200 OK\r\n");
+    return ffStrbufStartsWithS(buffer, "HTTP/1.1 200 OK\r\n") ? NULL : "Invalid response";
 }

src/common/networking_windows.c

@@ -33,48 +33,48 @@ static const char* initWsaData(WSADATA* wsaData)
     return NULL;
 }
 
-bool ffNetworkingSendHttpRequest(FFNetworkingState* state, const char* host, const char* path, const char* headers)
+const char* ffNetworkingSendHttpRequest(FFNetworkingState* state, const char* host, const char* path, const char* headers)
 {
     static WSADATA wsaData;
     if (wsaData.wVersion == 0)
     {
-        if (initWsaData(&wsaData) != NULL)
+        const char* error = initWsaData(&wsaData);
+        if (error != NULL)
         {
             wsaData.wVersion = (WORD) -1;
-            return false;
+            return error;
         }
     }
     else if (wsaData.wVersion == (WORD) -1)
-        return false;
-
-    memset(state, 0, sizeof(*state));
+        return "initWsaData() failed before";
 
     struct addrinfo* addr;
 
     if(getaddrinfo(host, "80", &(struct addrinfo) {
-        .ai_family = AF_INET,
+        .ai_family = state->ipv6 ? AF_INET6 : AF_INET,
         .ai_socktype = SOCK_STREAM,
     }, &addr) != 0)
-        return false;
+        return "getaddrinfo() failed";
 
     state->sockfd = socket(addr->ai_family, addr->ai_socktype, addr->ai_protocol);
     if(state->sockfd == INVALID_SOCKET)
     {
         freeaddrinfo(addr);
-        return false;
+        return "socket() failed";
     }
 
     {
         //ConnectEx requires the socket to be initially bound
-        struct sockaddr_in addr = {
+        if(bind(state->sockfd, (SOCKADDR *) &(struct sockaddr_in) {
             .sin_family = AF_INET,
             .sin_addr.s_addr = INADDR_ANY,
             .sin_port = 0,
-        };
-        if(bind(state->sockfd, (SOCKADDR *)&addr, sizeof(addr)) != 0)
+        }, sizeof(struct sockaddr_in)) != 0)
         {
-            printf("bind %d\n", WSAGetLastError());
-            return false;
+            closesocket(state->sockfd);
+            freeaddrinfo(addr);
+            state->sockfd = INVALID_SOCKET;
+            return "bind() failed";
         }
     }
 
@@ -93,35 +93,52 @@ bool ffNetworkingSendHttpRequest(FFNetworkingState* state, const char* host, con
     if(!result && WSAGetLastError() != WSA_IO_PENDING)
     {
         closesocket(state->sockfd);
-        return false;
+        freeaddrinfo(addr);
+        state->sockfd = INVALID_SOCKET;
+        return "ConnectEx() failed";
     }
 
-    return true;
+    return NULL;
 }
 
-bool ffNetworkingRecvHttpResponse(FFNetworkingState* state, FFstrbuf* buffer, uint32_t timeout)
+const char* ffNetworkingRecvHttpResponse(FFNetworkingState* state, FFstrbuf* buffer)
 {
+    if (state->sockfd == INVALID_SOCKET)
+        return "ffNetworkingSendHttpRequest() failed";
+
+    uint32_t timeout = state->timeout;
+    if (timeout > 0)
+    {
+        if (WaitForSingleObject((HANDLE) state->sockfd, timeout) != WAIT_OBJECT_0)
+        {
+            CancelIo((HANDLE) state->sockfd);
+            closesocket(state->sockfd);
+            return "WaitForSingleObject(state->sockfd) failed or timeout";
+        }
+    }
+
     DWORD transfer, flags;
     if (!WSAGetOverlappedResult(state->sockfd, &state->overlapped, &transfer, TRUE, &flags))
     {
         closesocket(state->sockfd);
-        return false;
+        return "WSAGetOverlappedResult() failed";
     }
 
     if(timeout > 0)
     {
         //https://learn.microsoft.com/en-us/windows/win32/api/winsock2/nf-winsock2-setsockopt
-        setsockopt(state->sockfd, SOL_SOCKET, SO_RCVTIMEO, (const char*)&timeout, sizeof(timeout));
+        setsockopt(state->sockfd, SOL_SOCKET, SO_RCVTIMEO, (const char*) &timeout, sizeof(timeout));
     }
 
-    ssize_t received = recv(state->sockfd, buffer->chars + buffer->length, (int)ffStrbufGetFree(buffer), 0);
-
-    if(received > 0)
-    {
-        buffer->length += (uint32_t) received;
+    uint32_t recvStart;
+    do {
+        recvStart = buffer->length;
+        ssize_t received = recv(state->sockfd, buffer->chars + buffer->length, (int) ffStrbufGetFree(buffer), 0);
+        if (received <= 0) break;
+        buffer->length = recvStart + (uint32_t) received;
         buffer->chars[buffer->length] = '\0';
-    }
+    } while (ffStrbufGetFree(buffer) > 0 && strstr(buffer->chars + recvStart, "\r\n\r\n") == NULL);
 
     closesocket(state->sockfd);
-    return ffStrbufStartsWithS(buffer, "HTTP/1.1 200 OK\r\n");
+    return ffStrbufStartsWithS(buffer, "HTTP/1.1 200 OK\r\n") ? NULL : "Invalid response";
 }

src/common/option.c

@@ -39,6 +39,16 @@ bool ffOptionParseModuleArgs(const char* argumentKey, const char* subKey, const
         ffOptionParseString(argumentKey, value, &result->outputFormat);
         return true;
     }
+    else if(ffStrEqualsIgnCase(subKey, "output-color"))
+    {
+        if(value == NULL)
+        {
+            fprintf(stderr, "Error: usage: %s <str>\n", argumentKey);
+            exit(477);
+        }
+        ffOptionParseColor(value, &result->outputColor);
+        return true;
+    }
     else if(ffStrEqualsIgnCase(subKey, "key-color"))
     {
         if(value == NULL)
@@ -148,6 +158,12 @@ void ffOptionParseColor(const char* value, FFstrbuf* buffer)
         FF_APPEND_COLOR_CODE_COND(reset_, FF_COLOR_MODE_RESET)
         else FF_APPEND_COLOR_CODE_COND(bright_, FF_COLOR_MODE_BOLD)
         else FF_APPEND_COLOR_CODE_COND(dim_, FF_COLOR_MODE_DIM)
+        else FF_APPEND_COLOR_CODE_COND(italic_, FF_COLOR_MODE_ITALIC)
+        else FF_APPEND_COLOR_CODE_COND(underline_, FF_COLOR_MODE_UNDERLINE)
+        else FF_APPEND_COLOR_CODE_COND(blink_, FF_COLOR_MODE_BLINK)
+        else FF_APPEND_COLOR_CODE_COND(inverse_, FF_COLOR_MODE_INVERSE)
+        else FF_APPEND_COLOR_CODE_COND(hidden_, FF_COLOR_MODE_HIDDEN)
+        else FF_APPEND_COLOR_CODE_COND(strike_, FF_COLOR_MODE_STRIKETHROUGH)
         else FF_APPEND_COLOR_CODE_COND(black, FF_COLOR_FG_BLACK)
         else FF_APPEND_COLOR_CODE_COND(red, FF_COLOR_FG_RED)
         else FF_APPEND_COLOR_CODE_COND(green, FF_COLOR_FG_GREEN)
@@ -180,6 +196,7 @@ void ffOptionInitModuleArg(FFModuleArgs* args)
     ffStrbufInit(&args->key);
     ffStrbufInit(&args->keyColor);
     ffStrbufInit(&args->outputFormat);
+    ffStrbufInit(&args->outputColor);
     args->keyWidth = 0;
 }
 
@@ -188,4 +205,5 @@ void ffOptionDestroyModuleArg(FFModuleArgs* args)
     ffStrbufDestroy(&args->key);
     ffStrbufDestroy(&args->keyColor);
     ffStrbufDestroy(&args->outputFormat);
+    ffStrbufDestroy(&args->outputColor);
 }

src/common/option.h

@@ -50,6 +50,7 @@ typedef struct FFModuleArgs
     FFstrbuf key;
     FFstrbuf keyColor;
     FFstrbuf outputFormat;
+    FFstrbuf outputColor;
     uint32_t keyWidth;
 } FFModuleArgs;
 

src/common/parsing.c

@@ -96,39 +96,23 @@ void ffParseSize(uint64_t bytes, FFstrbuf* result)
     }
 }
 
-void ffParseTemperature(double celsius, FFstrbuf* buffer)
-{
-    switch (instance.config.display.temperatureUnit)
-    {
-        case FF_TEMPERATURE_UNIT_CELSIUS:
-            ffStrbufAppendF(buffer, "%.1f°C", celsius);
-            break;
-        case FF_TEMPERATURE_UNIT_FAHRENHEIT:
-            ffStrbufAppendF(buffer, "%.1f°F", celsius * 1.8 + 32);
-            break;
-        case FF_TEMPERATURE_UNIT_KELVIN:
-            ffStrbufAppendF(buffer, "%.1f K", celsius + 273.15);
-            break;
-    }
-}
-
 void ffParseGTK(FFstrbuf* buffer, const FFstrbuf* gtk2, const FFstrbuf* gtk3, const FFstrbuf* gtk4)
 {
     if(gtk2->length > 0 && gtk3->length > 0 && gtk4->length > 0)
     {
-        if((ffStrbufIgnCaseComp(gtk2, gtk3) == 0) && (ffStrbufIgnCaseComp(gtk2, gtk4) == 0))
+        if((ffStrbufIgnCaseEqual(gtk2, gtk3)) && (ffStrbufIgnCaseEqual(gtk2, gtk4)))
         {
             ffStrbufAppend(buffer, gtk4);
             ffStrbufAppendS(buffer, " [GTK2/3/4]");
         }
-        else if(ffStrbufIgnCaseComp(gtk2, gtk3) == 0)
+        else if(ffStrbufIgnCaseEqual(gtk2, gtk3))
         {
             ffStrbufAppend(buffer, gtk3);
             ffStrbufAppendS(buffer, " [GTK2/3], ");
             ffStrbufAppend(buffer, gtk4);
             ffStrbufAppendS(buffer, " [GTK4]");
         }
-        else if(ffStrbufIgnCaseComp(gtk3, gtk4) == 0)
+        else if(ffStrbufIgnCaseEqual(gtk3, gtk4))
         {
             ffStrbufAppend(buffer, gtk2);
             ffStrbufAppendS(buffer, " [GTK2], ");
@@ -147,7 +131,7 @@ void ffParseGTK(FFstrbuf* buffer, const FFstrbuf* gtk2, const FFstrbuf* gtk3, co
     }
     else if(gtk2->length > 0 && gtk3->length > 0)
     {
-        if(ffStrbufIgnCaseComp(gtk2, gtk3) == 0)
+        if(ffStrbufIgnCaseEqual(gtk2, gtk3))
         {
             ffStrbufAppend(buffer, gtk3);
             ffStrbufAppendS(buffer, " [GTK2/3]");
@@ -162,7 +146,7 @@ void ffParseGTK(FFstrbuf* buffer, const FFstrbuf* gtk2, const FFstrbuf* gtk3, co
     }
     else if(gtk3->length > 0 && gtk4->length > 0)
     {
-        if(ffStrbufIgnCaseComp(gtk3, gtk4) == 0)
+        if(ffStrbufIgnCaseEqual(gtk3, gtk4))
         {
             ffStrbufAppend(buffer, gtk4);
             ffStrbufAppendS(buffer, " [GTK3/4]");

src/common/parsing.h

@@ -1,6 +1,6 @@
 #pragma once
 
-#include "fastfetch.h"
+#include "util/FFstrbuf.h"
 
 #include <stdint.h>
 
@@ -11,6 +11,12 @@ typedef struct FFVersion
     uint32_t patch;
 } FFVersion;
 
+typedef struct FFColorRangeConfig
+{
+    uint8_t green;
+    uint8_t yellow;
+} FFColorRangeConfig;
+
 #define FF_VERSION_INIT ((FFVersion) {0})
 
 void ffParseSemver(FFstrbuf* buffer, const FFstrbuf* major, const FFstrbuf* minor, const FFstrbuf* patch);
@@ -20,4 +26,3 @@ void ffVersionToPretty(const FFVersion* version, FFstrbuf* pretty);
 int8_t ffVersionCompare(const FFVersion* version1, const FFVersion* version2);
 
 void ffParseSize(uint64_t bytes, FFstrbuf* result);
-void ffParseTemperature(double celsius, FFstrbuf* buffer);

src/common/percent.c

@@ -6,7 +6,15 @@
 #include "util/textModifier.h"
 #include "util/stringUtils.h"
 
-void ffPercentAppendBar(FFstrbuf* buffer, double percent, FFPercentConfig config)
+static void appendOutputColor(FFstrbuf* buffer, const FFModuleArgs* module)
+{
+    if (module->outputColor.length)
+        ffStrbufAppendF(buffer, "\e[%sm", module->outputColor.chars);
+    else if (instance.config.display.colorOutput.length)
+        ffStrbufAppendF(buffer, "\e[%sm", instance.config.display.colorOutput.chars);
+}
+
+void ffPercentAppendBar(FFstrbuf* buffer, double percent, FFColorRangeConfig config, const FFModuleArgs* module)
 {
     uint8_t green = config.green, yellow = config.yellow;
     assert(green <= 100 && yellow <= 100);
@@ -66,16 +74,19 @@ void ffPercentAppendBar(FFstrbuf* buffer, double percent, FFPercentConfig config
     if(options->barBorder)
     {
         if(!options->pipe)
-            ffStrbufAppendS(buffer, "\e[" FF_COLOR_FG_LIGHT_WHITE "m ]");
+            ffStrbufAppendS(buffer, "\e[" FF_COLOR_FG_LIGHT_WHITE "m ]");\
         else
             ffStrbufAppendS(buffer, " ]");
     }
 
     if(!options->pipe)
+    {
         ffStrbufAppendS(buffer, FASTFETCH_TEXT_MODIFIER_RESET);
+        appendOutputColor(buffer, module);
+    }
 }
 
-void ffPercentAppendNum(FFstrbuf* buffer, double percent, FFPercentConfig config, bool parentheses)
+void ffPercentAppendNum(FFstrbuf* buffer, double percent, FFColorRangeConfig config, bool parentheses, const FFModuleArgs* module)
 {
     uint8_t green = config.green, yellow = config.yellow;
     assert(green <= 100 && yellow <= 100);
@@ -89,9 +100,9 @@ void ffPercentAppendNum(FFstrbuf* buffer, double percent, FFPercentConfig config
 
     if (colored && !options->pipe)
     {
-        const char* colorGreen = instance.config.display.percentColorGreen.chars;
-        const char* colorYellow = instance.config.display.percentColorYellow.chars;
-        const char* colorRed = instance.config.display.percentColorRed.chars;
+        const char* colorGreen = options->percentColorGreen.chars;
+        const char* colorYellow = options->percentColorYellow.chars;
+        const char* colorRed = options->percentColorRed.chars;
 
         if(percent != percent)
             ffStrbufAppendS(buffer, "\e[" FF_COLOR_FG_LIGHT_BLACK "m");
@@ -120,13 +131,14 @@ void ffPercentAppendNum(FFstrbuf* buffer, double percent, FFPercentConfig config
     if (colored && !options->pipe)
     {
         ffStrbufAppendS(buffer, FASTFETCH_TEXT_MODIFIER_RESET);
+        appendOutputColor(buffer, module);
     }
 
     if (parentheses)
         ffStrbufAppendC(buffer, ')');
 }
 
-bool ffPercentParseCommandOptions(const char* key, const char* subkey, const char* value, FFPercentConfig* config)
+bool ffPercentParseCommandOptions(const char* key, const char* subkey, const char* value, FFColorRangeConfig* config)
 {
     if (!ffStrStartsWithIgnCase(subkey, "percent-"))
         return false;
@@ -160,7 +172,7 @@ bool ffPercentParseCommandOptions(const char* key, const char* subkey, const cha
     return false;
 }
 
-bool ffPercentParseJsonObject(const char* key, yyjson_val* value, FFPercentConfig* config)
+bool ffPercentParseJsonObject(const char* key, yyjson_val* value, FFColorRangeConfig* config)
 {
     if (!ffStrEqualsIgnCase(key, "percent"))
         return false;
@@ -198,7 +210,7 @@ bool ffPercentParseJsonObject(const char* key, yyjson_val* value, FFPercentConfi
     return true;
 }
 
-void ffPercentGenerateJsonConfig(yyjson_mut_doc* doc, yyjson_mut_val* module, FFPercentConfig defaultConfig, FFPercentConfig config)
+void ffPercentGenerateJsonConfig(yyjson_mut_doc* doc, yyjson_mut_val* module, FFColorRangeConfig defaultConfig, FFColorRangeConfig config)
 {
     if (config.green == defaultConfig.green && config.yellow == defaultConfig.yellow)
         return;

src/common/percent.h

@@ -1,6 +1,8 @@
 #pragma once
 
 #include "util/FFstrbuf.h"
+#include "common/parsing.h"
+#include "common/option.h"
 
 enum
 {
@@ -10,12 +12,6 @@ enum
     FF_PERCENTAGE_TYPE_NUM_COLOR_BIT = 1 << 3,
 };
 
-typedef struct FFPercentConfig
-{
-    uint8_t green;
-    uint8_t yellow;
-} FFPercentConfig;
-
 // if (green <= yellow)
 // [0, green]: print green
 // (green, yellow]: print yellow
@@ -26,12 +22,12 @@ typedef struct FFPercentConfig
 // [yellow, green): print yellow
 // [0, yellow): print red
 
-void ffPercentAppendBar(FFstrbuf* buffer, double percent, FFPercentConfig config);
-void ffPercentAppendNum(FFstrbuf* buffer, double percent, FFPercentConfig config, bool parentheses);
+void ffPercentAppendBar(FFstrbuf* buffer, double percent, FFColorRangeConfig config, const FFModuleArgs* module);
+void ffPercentAppendNum(FFstrbuf* buffer, double percent, FFColorRangeConfig config, bool parentheses, const FFModuleArgs* module);
 
 typedef struct yyjson_val yyjson_val;
 typedef struct yyjson_mut_doc yyjson_mut_doc;
 typedef struct yyjson_mut_val yyjson_mut_val;
-bool ffPercentParseCommandOptions(const char* key, const char* subkey, const char* value, FFPercentConfig* config);
-bool ffPercentParseJsonObject(const char* key, yyjson_val* value, FFPercentConfig* config);
-void ffPercentGenerateJsonConfig(yyjson_mut_doc* doc, yyjson_mut_val* module, FFPercentConfig defaultConfig, FFPercentConfig config);
+bool ffPercentParseCommandOptions(const char* key, const char* subkey, const char* value, FFColorRangeConfig* config);
+bool ffPercentParseJsonObject(const char* key, yyjson_val* value, FFColorRangeConfig* config);
+void ffPercentGenerateJsonConfig(yyjson_mut_doc* doc, yyjson_mut_val* module, FFColorRangeConfig defaultConfig, FFColorRangeConfig config);

src/common/printing.c

@@ -37,9 +37,9 @@ void ffPrintLogoAndKey(const char* moduleName, uint8_t moduleIndex, const FFModu
     else
     {
         FF_STRBUF_AUTO_DESTROY key = ffStrbufCreate();
-        ffParseFormatString(&key, &moduleArgs->key, 1, (FFformatarg[]){
+        FF_PARSE_FORMAT_STRING_CHECKED(&key, &moduleArgs->key, 1, ((FFformatarg[]){
             {FF_FORMAT_ARG_TYPE_UINT8, &moduleIndex}
-        });
+        }));
         ffStrbufWriteTo(&key, stdout);
     }
 
@@ -49,8 +49,13 @@ void ffPrintLogoAndKey(const char* moduleName, uint8_t moduleIndex, const FFModu
     ffStrbufWriteTo(&instance.config.display.keyValueSeparator, stdout);
 
     if(!instance.config.display.pipe)
+    {
         fputs(FASTFETCH_TEXT_MODIFIER_RESET, stdout);
-
+        if (moduleArgs->outputColor.length)
+            ffPrintColor(&moduleArgs->outputColor);
+        else if (instance.config.display.colorOutput.length)
+            ffPrintColor(&instance.config.display.colorOutput);
+    }
 
     if (!instance.config.display.pipe && !(printType & FF_PRINT_TYPE_NO_CUSTOM_KEY_WIDTH))
     {
@@ -60,7 +65,7 @@ void ffPrintLogoAndKey(const char* moduleName, uint8_t moduleIndex, const FFModu
     }
 }
 
-void ffPrintFormatString(const char* moduleName, uint8_t moduleIndex, const FFModuleArgs* moduleArgs, FFPrintType printType, uint32_t numArgs, const FFformatarg* arguments)
+void ffPrintFormat(const char* moduleName, uint8_t moduleIndex, const FFModuleArgs* moduleArgs, FFPrintType printType, uint32_t numArgs, const FFformatarg* arguments)
 {
     FF_STRBUF_AUTO_DESTROY buffer = ffStrbufCreate();
     if (moduleArgs)
@@ -93,7 +98,7 @@ static void printError(const char* moduleName, uint8_t moduleIndex, const FFModu
     putchar('\n');
 }
 
-void ffPrintErrorString(const char* moduleName, uint8_t moduleIndex, const FFModuleArgs* moduleArgs, FFPrintType printType, const char* message, ...)
+void ffPrintError(const char* moduleName, uint8_t moduleIndex, const FFModuleArgs* moduleArgs, FFPrintType printType, const char* message, ...)
 {
     va_list arguments;
     va_start(arguments, message);
@@ -101,14 +106,6 @@ void ffPrintErrorString(const char* moduleName, uint8_t moduleIndex, const FFMod
     va_end(arguments);
 }
 
-void ffPrintError(const char* moduleName, uint8_t moduleIndex, const FFModuleArgs* moduleArgs, const char* message, ...)
-{
-    va_list arguments;
-    va_start(arguments, message);
-    printError(moduleName, moduleIndex, moduleArgs, FF_PRINT_TYPE_DEFAULT, message, arguments);
-    va_end(arguments);
-}
-
 void ffPrintColor(const FFstrbuf* colorValue)
 {
     //If the color is not set, this would reset in \033[m, which resets everything.

src/common/printing.h

@@ -12,14 +12,17 @@ typedef enum FFPrintType {
 } FFPrintType;
 
 void ffPrintLogoAndKey(const char* moduleName, uint8_t moduleIndex, const FFModuleArgs* moduleArgs, FFPrintType printType);
-void ffPrintFormatString(const char* moduleName, uint8_t moduleIndex, const FFModuleArgs* moduleArgs, FFPrintType printType, uint32_t numArgs, const FFformatarg* arguments);
-static inline void ffPrintFormat(const char* moduleName, uint8_t moduleIndex, const FFModuleArgs* moduleArgs, uint32_t numArgs, const FFformatarg* arguments)
-{
-    ffPrintFormatString(moduleName, moduleIndex, moduleArgs, FF_PRINT_TYPE_DEFAULT, numArgs, arguments);
-}
-FF_C_PRINTF(5, 6) void ffPrintErrorString(const char* moduleName, uint8_t moduleIndex, const FFModuleArgs* moduleArgs, FFPrintType printType, const char* message, ...);
-FF_C_PRINTF(4, 5) void ffPrintError(const char* moduleName, uint8_t moduleIndex, const FFModuleArgs* moduleArgs, const char* message, ...);
+void ffPrintFormat(const char* moduleName, uint8_t moduleIndex, const FFModuleArgs* moduleArgs, FFPrintType printType, uint32_t numArgs, const FFformatarg* arguments);
+#define FF_PRINT_FORMAT_CHECKED(moduleName, moduleIndex, moduleArgs, printType, numArgs, arguments) do {\
+    static_assert(sizeof(arguments) / sizeof(*(arguments)) == (numArgs), "Invalid number of format arguments");\
+    ffPrintFormat((moduleName), (moduleIndex), (moduleArgs), (printType), (numArgs), (arguments));\
+} while (0)
+FF_C_PRINTF(5, 6) void ffPrintError(const char* moduleName, uint8_t moduleIndex, const FFModuleArgs* moduleArgs, FFPrintType printType, const char* message, ...);
 void ffPrintColor(const FFstrbuf* colorValue);
 void ffPrintCharTimes(char c, uint32_t times);
 
 void ffPrintModuleFormatHelp(const char* name, const char* def, uint32_t numArgs, const char* args[]);
+#define FF_PRINT_MODULE_FORMAT_HELP_CHECKED(moduleName, def, numArgs, args) do {\
+    static_assert(sizeof(args) / sizeof(*(args)) == (numArgs), "Invalid number of format arguments");\
+    ffPrintModuleFormatHelp((moduleName), (def), (numArgs), (args));\
+} while (0)

src/common/processing.h

@@ -8,10 +8,7 @@ static inline const char* ffProcessAppendStdOut(FFstrbuf* buffer, char* const ar
 {
     const char* error = ffProcessAppendOutput(buffer, argv, false);
     if (!error)
-    {
-        ffStrbufTrimRight(buffer, '\n');
-        ffStrbufTrimRight(buffer, ' ');
-    }
+        ffStrbufTrimRightSpace(buffer);
     return error;
 }
 
@@ -19,9 +16,6 @@ static inline const char* ffProcessAppendStdErr(FFstrbuf* buffer, char* const ar
 {
     const char* error = ffProcessAppendOutput(buffer, argv, true);
     if (!error)
-    {
-        ffStrbufTrimRight(buffer, '\n');
-        ffStrbufTrimRight(buffer, ' ');
-    }
+        ffStrbufTrimRightSpace(buffer);
     return error;
 }

src/common/processing_linux.c

@@ -68,7 +68,7 @@ const char* ffProcessAppendOutput(FFstrbuf* buffer, char* const argv[], bool use
             {
                 kill(childPid, SIGTERM);
                 waitpid(childPid, NULL, 0);
-                return "poll(&pollfd, 1, timeout) timeout";
+                return "poll(&pollfd, 1, timeout) timeout (try increasing --processing-timeout)";
             }
             else if (pollfd.revents & POLLERR)
             {

src/common/processing_windows.c

@@ -96,7 +96,7 @@ const char* ffProcessAppendOutput(FFstrbuf* buffer, char* const argv[], bool use
                 {
                     CancelIo(hChildPipeRead);
                     TerminateProcess(hProcess, 1);
-                    return "WaitForSingleObject(hChildPipeRead) failed or timeout";
+                    return "WaitForSingleObject(hChildPipeRead) failed or timeout (try increasing --processing-timeout)";
                 }
 
                 if (!GetOverlappedResult(hChildPipeRead, &overlapped, &nRead, FALSE))

src/common/properties.c

@@ -1,5 +1,7 @@
 #include "fastfetch.h"
 #include "common/properties.h"
+#include "common/io/io.h"
+#include "util/mallocHelper.h"
 
 #include <stdlib.h>
 #ifdef _WIN32
@@ -95,50 +97,44 @@ bool ffParsePropLines(const char* lines, const char* start, FFstrbuf* buffer)
 
 bool ffParsePropFileValues(const char* filename, uint32_t numQueries, FFpropquery* queries)
 {
-    FILE* file = fopen(filename, "r");
-    if(file == NULL)
+    FF_AUTO_CLOSE_FILE FILE* file = fopen(filename, "r");
+    if (file == NULL)
         return false;
 
-    bool valueStorage[4];
-    bool* unsetValues;
+    bool valueStorage[32];
+    bool* unsetValues = valueStorage;
 
-    if(numQueries > sizeof(valueStorage) / sizeof(valueStorage[0]))
+    if (numQueries > sizeof(valueStorage) / sizeof(valueStorage[0]))
         unsetValues = malloc(sizeof(bool) * numQueries);
-    else
-        unsetValues = valueStorage;
 
     bool allSet = true;
-    for(uint32_t i = 0; i < numQueries; i++)
+    for (uint32_t i = 0; i < numQueries; i++)
     {
-        if((unsetValues[i] = queries[i].buffer->length == 0))
+        unsetValues[i] = queries[i].buffer->length == 0;
+        if (unsetValues[i])
             allSet = false;
     }
 
-    if(allSet)
-        goto done;
-
-    char* line = NULL;
-    size_t len = 0;
-
-    while (getline(&line, &len, file) != -1)
+    if (!allSet)
     {
-        for(uint32_t i = 0; i < numQueries; i++)
-        {
-            if(!unsetValues[i])
-                continue;
+        FF_AUTO_FREE char* line = NULL;
+        size_t len = 0;
 
-            uint32_t currentLength = queries[i].buffer->length;
-            queries[i].buffer->length = 0;
-            if(!ffParsePropLine(line, queries[i].start, queries[i].buffer))
-                queries[i].buffer->length = currentLength;
+        while (getline(&line, &len, file) != -1)
+        {
+            for(uint32_t i = 0; i < numQueries; i++)
+            {
+                if(!unsetValues[i])
+                    continue;
+
+                uint32_t currentLength = queries[i].buffer->length;
+                queries[i].buffer->length = 0;
+                if(!ffParsePropLine(line, queries[i].start, queries[i].buffer))
+                    queries[i].buffer->length = currentLength;
+            }
         }
     }
 
-    if(line != NULL)
-        free(line);
-
-done:
-    fclose(file);
     if(unsetValues != valueStorage)
         free(unsetValues);
     return true;
@@ -154,16 +150,13 @@ bool ffParsePropFileListValues(const FFlist* list, const char* relativeFile, uin
 {
     bool foundAFile = false;
 
-    FF_STRBUF_AUTO_DESTROY baseDir = ffStrbufCreateA(64);
-
     FF_LIST_FOR_EACH(FFstrbuf, dirPrefix, *list)
     {
-        //We need to copy the dir each time, because it used by multiple threads, so we can't directly write to it.
-        ffStrbufSet(&baseDir, dirPrefix);
-        ffStrbufAppendS(&baseDir, relativeFile);
-
-        if(ffParsePropFileValues(baseDir.chars, numQueries, queries))
+        const uint32_t dirPrefixLength = dirPrefix->length;
+        ffStrbufAppendS(dirPrefix, relativeFile);
+        if(ffParsePropFileValues(dirPrefix->chars, numQueries, queries))
             foundAFile = true;
+        ffStrbufSubstrBefore(dirPrefix, dirPrefixLength);
 
         bool allSet = true;
         for(uint32_t k = 0; k < numQueries; k++)

src/common/temps.c

@@ -0,0 +1,177 @@
+#include "fastfetch.h"
+#include "common/temps.h"
+#include "util/textModifier.h"
+#include "util/stringUtils.h"
+
+void ffTempsAppendNum(double celsius, FFstrbuf* buffer, FFColorRangeConfig config, const FFModuleArgs* module)
+{
+    if (celsius != celsius) // ignores NaN
+        return;
+
+    const FFOptionsDisplay* options = &instance.config.display;
+    const char* colorGreen = options->tempColorGreen.chars;
+    const char* colorYellow = options->tempColorYellow.chars;
+    const char* colorRed = options->tempColorRed.chars;
+
+    uint8_t green = config.green, yellow = config.yellow;
+
+    if (!options->pipe)
+    {
+        if(green <= yellow)
+        {
+            if (celsius > yellow)
+                ffStrbufAppendF(buffer, "\e[%sm", colorRed);
+            else if (celsius > green)
+                ffStrbufAppendF(buffer, "\e[%sm", colorYellow);
+            else
+                ffStrbufAppendF(buffer, "\e[%sm", colorGreen);
+        }
+        else
+        {
+            if (celsius < yellow)
+                ffStrbufAppendF(buffer, "\e[%sm", colorRed);
+            else if (celsius < green)
+                ffStrbufAppendF(buffer, "\e[%sm", colorYellow);
+            else
+                ffStrbufAppendF(buffer, "\e[%sm", colorGreen);
+        }
+    }
+
+    switch (options->tempUnit)
+    {
+        case FF_TEMPERATURE_UNIT_CELSIUS:
+            ffStrbufAppendF(buffer, "%.*f°C", options->tempNdigits, celsius);
+            break;
+        case FF_TEMPERATURE_UNIT_FAHRENHEIT:
+            ffStrbufAppendF(buffer, "%.*f°F", options->tempNdigits, celsius * 1.8 + 32);
+            break;
+        case FF_TEMPERATURE_UNIT_KELVIN:
+            ffStrbufAppendF(buffer, "%.*f K", options->tempNdigits, celsius + 273.15);
+            break;
+    }
+
+    if (!options->pipe)
+    {
+        ffStrbufAppendS(buffer, FASTFETCH_TEXT_MODIFIER_RESET);
+        if (module->outputColor.length)
+            ffStrbufAppendF(buffer, "\e[%sm", module->outputColor.chars);
+        else if (instance.config.display.colorOutput.length)
+            ffStrbufAppendF(buffer, "\e[%sm", instance.config.display.colorOutput.chars);
+    }
+}
+
+bool ffTempsParseCommandOptions(const char* key, const char* subkey, const char* value, bool* useTemp, FFColorRangeConfig* config)
+{
+    if (!ffStrStartsWithIgnCase(subkey, "temp"))
+        return false;
+
+    if (subkey[strlen("temp")] == '\0')
+    {
+        *useTemp = ffOptionParseBoolean(value);
+        return true;
+    }
+
+    if (subkey[strlen("temp")] != '-')
+        return false;
+
+    subkey += strlen("temp-");
+
+    if (ffStrEqualsIgnCase(subkey, "green"))
+    {
+        uint32_t num = ffOptionParseUInt32(key, value);
+        if (num > 100)
+        {
+            fprintf(stderr, "Error: usage: %s must be between 0 and 100\n", key);
+            exit(480);
+        }
+        config->green = (uint8_t) num;
+        return true;
+    }
+
+    if (ffStrEqualsIgnCase(subkey, "yellow"))
+    {
+        uint32_t num = ffOptionParseUInt32(key, value);
+        if (num > 100)
+        {
+            fprintf(stderr, "Error: usage: %s must be between 0 and 100\n", key);
+            exit(480);
+        }
+        config->yellow = (uint8_t) num;
+        return true;
+    }
+
+    return false;
+}
+
+bool ffTempsParseJsonObject(const char* key, yyjson_val* value, bool* useTemp, FFColorRangeConfig* config)
+{
+    if (!ffStrEqualsIgnCase(key, "temp"))
+        return false;
+
+    if (yyjson_is_bool(value))
+    {
+        *useTemp = yyjson_get_bool(value);
+        return true;
+    }
+
+    if (yyjson_is_null(value))
+    {
+        *useTemp = false;
+        return true;
+    }
+
+    if (!yyjson_is_obj(value))
+    {
+        fprintf(stderr, "Error: usage: %s must be an object or a boolean\n", key);
+        exit(480);
+    }
+
+    *useTemp = true;
+
+    yyjson_val* greenVal = yyjson_obj_get(value, "green");
+    if (greenVal)
+    {
+        int num = yyjson_get_int(greenVal);
+        if (num < 0 || num > 100)
+        {
+            fputs("Error: usage: temp.green must be between 0 and 100\n", stderr);
+            exit(480);
+        }
+        config->green = (uint8_t) num;
+    }
+
+    yyjson_val* yellowVal = yyjson_obj_get(value, "yellow");
+    if (yellowVal)
+    {
+        int num = yyjson_get_int(yellowVal);
+        if (num < 0 || num > 100)
+        {
+            fputs("Error: usage: temp.yellow must be between 0 and 100\n", stderr);
+            exit(480);
+        }
+        config->yellow = (uint8_t) num;
+    }
+
+    return true;
+}
+
+void ffTempsGenerateJsonConfig(yyjson_mut_doc* doc, yyjson_mut_val* module, FF_MAYBE_UNUSED bool defaultTemp, FFColorRangeConfig defaultConfig, bool temp, FFColorRangeConfig config)
+{
+    assert(defaultTemp == false); // assume defaultTemp is always false
+
+    if (!temp)
+        return;
+
+    if (config.green != defaultConfig.green || config.yellow != defaultConfig.yellow)
+    {
+        yyjson_mut_val* temp = yyjson_mut_obj_add_obj(doc, module, "temp");
+        if (config.green != defaultConfig.green)
+            yyjson_mut_obj_add_uint(doc, temp, "green", config.green);
+        if (config.yellow != defaultConfig.yellow)
+            yyjson_mut_obj_add_uint(doc, temp, "yellow", config.yellow);
+    }
+    else
+    {
+        yyjson_mut_obj_add_bool(doc, module, "temp", true);
+    }
+}

src/common/temps.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include "common/parsing.h"
+#include "common/option.h"
+
+void ffTempsAppendNum(double celsius, FFstrbuf* buffer, FFColorRangeConfig config, const FFModuleArgs* module);
+bool ffTempsParseCommandOptions(const char* key, const char* subkey, const char* value, bool* useTemp, FFColorRangeConfig* config);
+bool ffTempsParseJsonObject(const char* key, yyjson_val* value, bool* useTemp, FFColorRangeConfig* config);
+void ffTempsGenerateJsonConfig(yyjson_mut_doc* doc, yyjson_mut_val* module, FF_MAYBE_UNUSED bool defaultTemp, FFColorRangeConfig defaultConfig, bool temp, FFColorRangeConfig config);

src/common/time.h

@@ -1,12 +1,12 @@
 #pragma once
 
 #include <stdint.h>
+#include <time.h>
+#include <stdio.h>
 #ifdef _WIN32
     #include <synchapi.h>
     #include <profileapi.h>
     #include <sysinfoapi.h>
-#else
-    #include <time.h>
 #endif
 
 static inline uint64_t ffTimeGetTick() //In msec
@@ -45,3 +45,37 @@ static inline void ffTimeSleep(uint32_t msec)
         nanosleep(&(struct timespec){ msec / 1000, (long) (msec % 1000) * 1000000 }, NULL);
     #endif
 }
+
+#ifdef _WIN32
+    #pragma GCC diagnostic push
+    #pragma GCC diagnostic ignored "-Wformat"
+#endif
+
+// Not thread-safe
+static inline const char* ffTimeToFullStr(uint64_t msec)
+{
+    if (msec == 0) return "";
+    time_t tsec = (time_t) (msec / 1000);
+    const struct tm* tm = localtime(&tsec);
+
+    static char buf[32];
+    strftime(buf, __builtin_strlen("0000-00-00T00:00:00") + 1, "%FT%T", tm);
+    snprintf(buf + __builtin_strlen("0000-00-00T00:00:00"), __builtin_strlen(".000") + 1, ".%03u", (unsigned) (msec % 1000));
+    strftime(buf + __builtin_strlen("0000-00-00T00:00:00.000"), __builtin_strlen("+0000") + 1, "%z", tm);
+    return buf;
+}
+
+// Not thread-safe
+static inline const char* ffTimeToShortStr(uint64_t msec)
+{
+    if (msec == 0) return "";
+    time_t tsec = (time_t) (msec / 1000);
+
+    static char buf[32];
+    strftime(buf, sizeof(buf), "%F %T", localtime(&tsec));
+    return buf;
+}
+
+#ifdef _WIN32
+    #pragma GCC diagnostic pop
+#endif

src/data/help.json

@@ -122,7 +122,10 @@
         {
             "long": "ds-force-drm",
             "desc": "Set if only DRM should be used to detect displays",
-            "remark": "Use this option if you encountered problems with other detection method. Linux only",
+            "remark": [
+                "Use this option if you encountered problems with other detection method.",
+                "Linux only"
+            ],
             "arg": {
                 "type": "enum",
                 "optional": true,
@@ -433,7 +436,7 @@
         {
             "long": "color-keys",
             "desc": "Set the color of the keys",
-            "remark": "See `-h color` for the list of available colors",
+            "remark": "Doesn't affect module Title, Separator and Colors. See `-h color` for the list of available colors",
             "arg": {
                 "type": "color"
             }
@@ -446,6 +449,14 @@
                 "type": "color"
             }
         },
+        {
+            "long": "color-output",
+            "desc": "Set the color of module output",
+            "remark": "See `-h color` for the list of available colors",
+            "arg": {
+                "type": "color"
+            }
+        },
         {
             "long": "color",
             "desc": "Set the color of both the keys and title",
@@ -478,22 +489,6 @@
                 "default": ": "
             }
         },
-        {
-            "long": "set",
-            "desc": "Hard set the value of a key",
-            "remark": "Deprecated. Use \"Custom\" module instead",
-            "arg": {
-                "type": "key=value"
-            }
-        },
-        {
-            "long": "set-keyless",
-            "desc": "Hard set the value of a key, but don't print the key or the separator",
-            "remark": "Deprecated. Use \"Custom\" module instead",
-            "arg": {
-                "type": "key=value"
-            }
-        },
         {
             "long": "show-errors",
             "desc": "Print occurring errors",
@@ -518,7 +513,7 @@
             "arg": {
                 "type": "bool",
                 "optional": true,
-                "default": true
+                "default": false
             }
         },
         {
@@ -537,7 +532,13 @@
         {
             "long": "percent-type",
             "desc": "Set the percentage output type",
-            "remark": "1 for percentage number, 2 for bar, 3 for both, 6 for bar only, 9 for colored number",
+            "remark": [
+                "1 for percentage number",
+                "2 for bar",
+                "3 for both",
+                "6 for bar only",
+                "9 for colored number"
+            ],
             "arg": {
                 "type": "num",
                 "default": 9
@@ -647,7 +648,7 @@
             }
         },
         {
-            "long": "temperature-unit",
+            "long": "temp-unit",
             "desc": "Set the unit of the temperature",
             "arg": {
                 "type": "enum",
@@ -658,6 +659,51 @@
                 },
                 "default": "C"
             }
+        },
+        {
+            "long": "temp-ndigits",
+            "desc": "Set the number of digits to keep after the decimal point when printing temperature",
+            "arg": {
+                "type": "num",
+                "default": 2
+            }
+        },
+        {
+            "long": "temp-color-green",
+            "desc": "Set color used in green state of temperature values",
+            "remark": "See `-h color` for the list of available colors",
+            "arg": {
+                "type": "color",
+                "default": "green"
+            }
+        },
+        {
+            "long": "temp-color-yellow",
+            "desc": "Set color used in yellow state of temperature values",
+            "remark": "See `-h color` for the list of available colors",
+            "arg": {
+                "type": "color",
+                "default": "light_yellow"
+            }
+        },
+        {
+            "long": "temp-color-red",
+            "desc": "Set color used in red state of temperature values",
+            "remark": "See `-h color` for the list of available colors",
+            "arg": {
+                "type": "color",
+                "default": "light_red"
+            }
+        },
+        {
+            "long": "ts-version",
+            "desc": "Whether to detect and display the version of terminal and shell",
+            "remark": "Mainly for benchmarking",
+            "arg": {
+                "type": "bool",
+                "optional": true,
+                "default": true
+            }
         }
     ],
     "Library path": [
@@ -884,16 +930,17 @@
             }
         },
         {
-            "long": "os-file",
-            "desc": "Set the additional file path which containing OS information",
-            "remark": "Linux only",
+            "long": "separator-output-color",
+            "desc": "Set the color of the separator module",
             "arg": {
-                "type": "path"
+                "type": "color",
+                "default": "default"
             }
         },
         {
             "long": "disk-folders",
-            "desc": "A colon (semicolon on Windows) separated list of folder paths for the disk output",
+            "desc": "A colon (semicolon on Windows) separated list of folder paths to be detected",
+            "remark": "On Windows, a drive latter must be upper cased and end with \"\\\". \"/\" is used as an alias of the system drive. This option overrides other disk-show-* options",
             "arg": {
                 "type": "path",
                 "default": "Auto detection using mount-points"
@@ -963,6 +1010,14 @@
                 "default": false
             }
         },
+        {
+            "long": "diskio-detect-total",
+            "desc": "Detect total bytes instead of current rate",
+            "arg": {
+                "type": "bool",
+                "default": false
+            }
+        },
         {
             "long": "diskio-name-prefix",
             "desc": "Show disks with given name prefix only",
@@ -996,13 +1051,16 @@
             }
         },
         {
-            "long": "packages-winget",
-            "desc": "Set if winget package count should be detected",
-            "remark": "This option is extremely slow. You may need to increase value of '--processing-timeout' to make it actually work",
+            "long": "packages-disabled",
+            "desc": "A colon separated list of package managers to be disabled when detecting",
+            "remark": [
+                "Some detection methods can be very slow.",
+                "You may need to increase value of '--processing-timeout' to make it actually work.",
+                "Use `--packages-disabled none` to enable all."
+            ],
             "arg": {
-                "type": "bool",
-                "optional": true,
-                "default": false
+                "type": "string",
+                "default": "winget"
             }
         },
         {
@@ -1013,7 +1071,9 @@
                 "enum": {
                     "none": "Disable this compact mode",
                     "original": "Print original resolutions",
-                    "scaled": "Print scaled resolutions"
+                    "scaled": "Print scaled resolutions",
+                    "original-with-refresh-rate": "Print original resolutions with refresh rate",
+                    "scaled-with-refresh-rate": "Print scaled resolutions with refresh rate"
                 },
                 "default": "none"
             }
@@ -1027,6 +1087,19 @@
                 "default": false
             }
         },
+        {
+            "long": "display-order",
+            "desc": "Set the order should be used when printing displays",
+            "arg": {
+                "type": "enum",
+                "enum": {
+                    "none": "Use the detected order",
+                    "asc": "Sort by display name ascendingly",
+                    "desc": "Sort by display name descendingly"
+                },
+                "default": "none"
+            }
+        },
         {
             "long": "brightness-ddcci-sleep",
             "desc": "Set the sleep times (in ms) when sending DDC/CI requests",
@@ -1052,7 +1125,10 @@
         {
             "long": "battery-use-setup-api",
             "desc": "Set if \"SetupAPI\" should be used on Windows to detect battery info",
-            "remark": "SetupAPI supports multi batteries, but slower. Windows only",
+            "remark": [
+                "SetupAPI supports multi batteries, but slower.",
+                "Windows only"
+            ],
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1076,6 +1152,15 @@
                 "default": 2
             }
         },
+        {
+            "long": "cpu-show-pe-core-count",
+            "desc": "Detect and display CPU frequency of different core types (eg. Pcore and Ecore) if supported",
+            "arg": {
+                "type": "bool",
+                "optional": true,
+                "default": false
+            }
+        },
         {
             "long": "cpuusage-separate",
             "desc": "Display CPU usage per CPU logical core, instead of an average result",
@@ -1088,7 +1173,10 @@
         {
             "long": "de-slow-version-detection",
             "desc": "Set if DE version should be detected with slow operations",
-            "remark": "Usually is not necessary. Linux only",
+            "remark": [
+                "It's only used as a fallback method. Please file a bug report if you encounter any issues.",
+                "Linux only"
+            ],
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1107,7 +1195,10 @@
         {
             "long": "gpu-driver-specific",
             "desc": "Use driver specific method to detect more detailed GPU information (memory usage, core count, etc)",
-            "remark": "Correctly NVML (NVIDIA) and IGCL (Intel, Windows only) are supported. Both require the latest proprietary driver to be installed",
+            "remark": [
+                "Correctly NVML (NVIDIA) and IGCL (Intel, Windows only) are supported.",
+                "Both require the latest proprietary driver to be installed."
+            ],
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1115,13 +1206,18 @@
             }
         },
         {
-            "long": "gpu-force-vulkan",
-            "desc": "Force using vulkan to detect GPUs",
-            "remark": "Vulkan supports video memory usage detection",
+            "long": "gpu-detection-method",
+            "desc": "Force using a specified method to detect GPUs",
+            "remark": "Will fall back to next methods if the specified method fails",
             "arg": {
-                "type": "bool",
-                "optional": true,
-                "default": false
+                "type": "enum",
+                "enum": {
+                    "auto": "Query platform specific graphic APIs. Requires proper GPU drivers installed. Not supported on FreeBSD",
+                    "pci": "Search PCI devices, which do not requires GPU driver installed. Not supported on Windows and macOS",
+                    "vulkan": "Use Vulkan API. Slow and requires vulkan driver installed. Used for Android",
+                    "opengl": "Use OpenGL API. Slow and only detects one GPU"
+                },
+                "default": "auto"
             }
         },
         {
@@ -1146,6 +1242,14 @@
                 "default": false
             }
         },
+        {
+            "long": "loadavg-ndigits",
+            "desc": "Set the number of digits to keep after the decimal point when printing load average",
+            "arg": {
+                "type": "num",
+                "default": 2
+            }
+        },
         {
             "long": "localip-show-ipv4",
             "desc": "Show IPv4 addresses in local ip module",
@@ -1182,6 +1286,15 @@
                 "default": false
             }
         },
+        {
+            "long": "localip-show-prefix-len",
+            "desc": "Show network prefix length (/N) in local ip module",
+            "arg": {
+                "type": "bool",
+                "optional": true,
+                "default": true
+            }
+        },
         {
             "long": "localip-name-prefix",
             "desc": "Show interfaces with given interface name prefix only",
@@ -1199,6 +1312,15 @@
                 "default": true
             }
         },
+        {
+            "long": "localip-show-all-ips",
+            "desc": "Show all IPs bound to the same interface. By default only the first IP is shown",
+            "arg": {
+                "type": "bool",
+                "optional": true,
+                "default": false
+            }
+        },
         {
             "long": "localip-compact",
             "desc": "Show all IPs in one line",
@@ -1225,6 +1347,14 @@
                 "default": true
             }
         },
+        {
+            "long": "netio-detect-total",
+            "desc": "Detect total bytes instead of current rate",
+            "arg": {
+                "type": "bool",
+                "default": false
+            }
+        },
         {
             "long": "publicip-timeout",
             "desc": "Time in milliseconds to wait for the public ip server to respond",
@@ -1241,6 +1371,14 @@
                 "type": "str"
             }
         },
+        {
+            "long": "publicip-ipv6",
+            "desc": "Whether to use IPv6 for public IP detection server",
+            "arg": {
+                "type": "bool",
+                "default": false
+            }
+        },
         {
             "long": "weather-location",
             "desc": "Set the location to be used",
@@ -1342,6 +1480,44 @@
                 "type": "num",
                 "default": 0
             }
+        },
+        {
+            "long": "colors-block-width",
+            "desc": "Set the block width in spaces",
+            "arg": {
+                "type": "num",
+                "default": 3
+            }
+        },
+        {
+            "long": "colors-block-range-start",
+            "desc": "Set the start range of colors in the blocks to print",
+            "remark": [
+                "Display colors 0-15 in the blocks. (16 colors)",
+                "Display colors 0-7 in the blocks. (8 colors)",
+                "Only works for `--colors-symbol block`.",
+                "Must be in range 0-15",
+                "See also `--colors-range-end`"
+            ],
+            "arg": {
+                "type": "num",
+                "default": 0
+            }
+        },
+        {
+            "long": "colors-block-range-end",
+            "desc": "Set the end range of colors in the blocks to print",
+            "remark": [
+                "Display colors 0-15 in the blocks. (16 colors)",
+                "Display colors 0-7 in the blocks. (8 colors)",
+                "Only works for `--colors-symbol block`.",
+                "Must be in range 0-15",
+                "See also `--colors-range-start`"
+            ],
+            "arg": {
+                "type": "num",
+                "default": 15
+            }
         }
     ],
     "General module": [
@@ -1377,6 +1553,14 @@
             },
             "pseudo": true
         },
+        {
+            "long": "<module>-output-color",
+            "desc": "Override the global \"--color-output\" option for each specific module",
+            "arg": {
+                "type": "color"
+            },
+            "pseudo": true
+        },
         {
             "long": "<module>-key-width",
             "desc": "Override the global \"--key-width\" option for each specific module",
@@ -1407,6 +1591,29 @@
                 "type": "num"
             },
             "pseudo": true
+        },
+        {
+            "long": "<module>-temp-green",
+            "desc": [
+                "Threshold of temperature colors",
+                "Value less then temp-green will be shown in green"
+            ],
+            "arg": {
+                "type": "num"
+            },
+            "pseudo": true
+        },
+        {
+            "long": "<module>-temp-yellow",
+            "desc": [
+                "Threshold of temperature colors",
+                "Value greater than temp-green and less then yellow will be shown in yellow",
+                "Value greater than temp-yellow will be shown in red"
+            ],
+            "arg": {
+                "type": "num"
+            },
+            "pseudo": true
         }
     ]
 }

src/data/help_color.txt

@@ -3,7 +3,8 @@ Usage: fastfetch --color <color>
 <color> must be a color encoding as ANSI escape sequences. It is inserted between "ESC[" and "m".
 Infos about them can be found here: https://en.wikipedia.org/wiki/ANSI_escape_code#SGR_(Select_Graphic_Rendition)_parameters.
 Examples:
-   --color 35:    sets the color to magenta. `--color magenta` is also supported
-   --color 4;92:  sets the color to bright Green with underline
-   --color 5;104: blinking text on a blue background
+   --color 35:      sets the color to magenta. `--color magenta` is also supported
+   --color 38;5;38: sets the color to 38th color of ANSI 256 colors
+   --color 4;92:    sets the color to bright Green with underline. `--color underline_green` is also supported
+   --color 5;104:   blinking text on a blue background
 If no color is set, the main color of the logo will be used.

src/data/help_config.txt

@@ -1,8 +0,0 @@
-Usage: fastfetch -c <file>
-
-Loads a config file. A config file contains one flag per line. Empty lines or lines starting with # are ignored.
-If the file is relative it looks in the following order:
-   - relative to the current working directory
-   - relative to ~/.local/share/fastfetch/presets/
-   - relative to /usr/share/fastfetch/presets/
-Fastfetch provides some default presets. List them with "fastfetch --list-presets".

src/data/help_format.txt

@@ -1,15 +1,15 @@
 A format string is a string that contains placeholders for values.
 These placeholders begin with a '{', containing the index of the value, and end with a '}'.
-For example the format string "Values: {1} ({2})", with the values "First" and "My second val", will produce
+For example the format string "Values: {1} ({2})", with the values "First" and "My second val", will produce "Values: First (My second val)".
 The format string can contain placeholders in any order and have multiple occurrences.
 To include spaces when setting from the command line, surround the whole string with double quotes (").
 
 If the value index is missing, meaning the placeholder is "{}", an internal counter sets the value index.
 This means that the format string "Values: {1} ({2})" is equivalent to "Values: {} ({})".
-Note that this counter only counts empty placeholders, so the format string "{2} {} {}" will contain the second v
+Note that this counter only counts empty placeholders, so the format string "{2} {} {}" will contain the second value, then the first, and then the second again.
 
-To make formatting easier, a double open curly brace ("{{") will be printed as a single open curly brace and not
-If a value index is misformatted or wants a non-existing value, it will be printed as is, with the curly braces aro
+To make formatting easier, a double open curly brace ("{{") will be printed as a single open curly brace and not counted as the beginning of a placeholder.
+If a value index is misformatted or wants a non-existing value, it will be printed as is, with the curly braces around it.
 If the last placeholder isn't closed, it will be treated like it was at the end of the format string.
 
 To only print something if a variable is set, use "{?<index>} ... {?}".
@@ -17,7 +17,7 @@ For example, to only print a second value if it is set, use "{?2} Second value:
 If a "{?}" is found without an opener, it is printed as is.
 
 To only print something if a variable is not set, do the same as with if, just replace every '?' with a '!'.
-For example to print a fallback for a second value if it is not set, use "{?2}{2}{?}{/2}Second value fallback{/}"
+For example to print a fallback for a second value if it is not set, use "{?2}{2}{?}{/2}Second value fallback{/}".
 
 To stop formatting at any point in the format string, use "{-}".
 
@@ -25,7 +25,7 @@ To print something with color, start a placeholder with a '#' and then the linux
 "\033[" at the start, and an 'm' at the end is automatically added, so don't do that.
 A "{#}" is equivalent to a "{#0}" and resets everything to normal.
 For example to print something pink and underline, use "{#4;35}...{#}".
-Information about what the numbers mean can be found here: https://en.wikipedia.org/wiki/ANSI_escape_code#SGR_(Sele
+Information about what the numbers mean can be found here: https://en.wikipedia.org/wiki/ANSI_escape_code#SGR_(Select_Graphic_Rendition)_parameters.
 Which escape codes are supported and how they look is defined by your terminal.
 
 If a format string evaluates to an empty value, the whole line in the output will be discarded.

src/detection/battery/battery_android.c

@@ -40,6 +40,7 @@ static const char* parseTermuxApi(FFBatteryOptions* options, FFlist* results)
     ffStrbufInit(&battery->modelName);
     ffStrbufInit(&battery->status);
     ffStrbufInit(&battery->technology);
+    ffStrbufInit(&battery->serial);
     ffStrbufInit(&battery->manufactureDate);
 
     battery->capacity = yyjson_get_num(yyjson_obj_get(root, "percentage"));
@@ -77,6 +78,8 @@ static const char* parseDumpsys(FFBatteryOptions* options, FFlist* results)
     ffStrbufInit(&battery->modelName);
     ffStrbufInit(&battery->status);
     ffStrbufInit(&battery->technology);
+    ffStrbufInit(&battery->serial);
+    ffStrbufInit(&battery->manufactureDate);
 
     if (ffParsePropLines(start, "AC powered: ", &temp) && ffStrbufEqualS(&temp, "true"))
         ffStrbufAppendS(&battery->status, "AC powered");

src/detection/battery/battery_apple.c

@@ -20,6 +20,14 @@ const char* ffDetectBattery(FFBatteryOptions* options, FFlist* results)
         if (IORegistryEntryCreateCFProperties(entryBattery, &properties, kCFAllocatorDefault, kNilOptions) != kIOReturnSuccess)
             continue;
 
+        int currentCapacity, maxCapacity;
+
+        if (ffCfDictGetInt(properties, CFSTR(kIOPMPSMaxCapacityKey), &maxCapacity) != NULL || maxCapacity <= 0)
+            continue;
+
+        if (ffCfDictGetInt(properties, CFSTR(kIOPMPSCurrentCapacityKey), &currentCapacity) != NULL || currentCapacity <= 0)
+            continue;
+
         bool boolValue;
 
         FFBatteryResult* battery = ffListAdd(results);
@@ -30,16 +38,6 @@ const char* ffDetectBattery(FFBatteryOptions* options, FFlist* results)
         ffStrbufInit(&battery->technology);
         ffStrbufInit(&battery->status);
         ffStrbufInit(&battery->manufactureDate);
-        battery->capacity = 0.0/0.0;
-
-        int currentCapacity, maxCapacity;
-
-        if (ffCfDictGetInt(properties, CFSTR(kIOPMPSMaxCapacityKey), &maxCapacity) != NULL || maxCapacity <= 0)
-            continue;
-
-        if (ffCfDictGetInt(properties, CFSTR(kIOPMPSCurrentCapacityKey), &currentCapacity) != NULL || currentCapacity <= 0)
-            continue;
-
         battery->capacity = currentCapacity * 100.0 / maxCapacity;
 
         ffCfDictGetString(properties, CFSTR(kIOPMDeviceNameKey), &battery->modelName);

src/detection/battery/battery_bsd.c

@@ -54,13 +54,13 @@ const char* ffDetectBattery(FF_MAYBE_UNUSED FFBatteryOptions* options, FFlist* r
             else if(battio.battinfo.state & ACPI_BATT_STAT_CHARGING)
                 ffStrbufAppendS(&battery->status, "Charging, ");
             if(battio.battinfo.state & ACPI_BATT_STAT_CRITICAL)
-                ffStrbufAppendS(&battery->status, "Ctritical, ");
+                ffStrbufAppendS(&battery->status, "Critical, ");
         }
 
         int acadStatus;
         if (ioctl(acpifd, ACPIIO_ACAD_GET_STATUS, &acadStatus) >= 0 && acadStatus)
         {
-            ffStrbufAppendS(&battery->status, "AC connected");
+            ffStrbufAppendS(&battery->status, "AC Connected");
         }
         else
         {

src/detection/battery/battery_linux.c

@@ -5,6 +5,8 @@
 
 #include <dirent.h>
 
+// https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-class-power
+
 static void parseBattery(FFstrbuf* dir, const char* id, FFBatteryOptions* options, FFlist* results)
 {
     uint32_t dirLength = dir->length;
@@ -68,6 +70,26 @@ static void parseBattery(FFstrbuf* dir, const char* id, FFBatteryOptions* option
         ffStrbufTrimRightSpace(&result->status);
     ffStrbufSubstrBefore(dir, dirLength);
 
+    // Unknown, Charging, Discharging, Not charging, Full
+    if (ffStrbufEqualS(&result->status, "Not charging") || ffStrbufEqualS(&result->status, "Full"))
+        ffStrbufSetStatic(&result->status, "AC Connected");
+    else if (ffStrbufEqualS(&result->status, "Unknown"))
+        ffStrbufClear(&result->status);
+
+    ffStrbufAppendS(dir, "/capacity_level");
+    if (ffReadFileBuffer(dir->chars, &tmpBuffer))
+    {
+        ffStrbufTrimRightSpace(&result->manufacturer);
+        if (ffStrbufEqualS(&tmpBuffer, "Critical"))
+        {
+            if (result->status.length)
+                ffStrbufAppendS(&result->status, ", Critical");
+            else
+                ffStrbufSetStatic(&result->status, "Critical");
+        }
+    }
+    ffStrbufSubstrBefore(dir, dirLength);
+
     ffStrbufInit(&result->serial);
     ffStrbufAppendS(dir, "/serial_number");
     if (ffReadFileBuffer(dir->chars, &result->serial))
@@ -148,8 +170,5 @@ const char* ffDetectBattery(FFBatteryOptions* options, FFlist* results)
         ffStrbufSubstrBefore(&baseDir, baseDirLength);
     }
 
-    if(results->length == 0)
-        return "\"/sys/class/power_supply/\" doesn't contain any battery folder";
-
     return NULL;
 }

src/detection/battery/battery_windows.c

@@ -1,4 +1,7 @@
 #include "battery.h"
+
+#include "common/io/io.h"
+#include "util/windows/nt.h"
 #include "util/windows/unicode.h"
 #include "util/mallocHelper.h"
 #include "util/smbiosHelper.h"
@@ -10,21 +13,6 @@
 #include <devguid.h>
 #include <winternl.h>
 
-NTSYSCALLAPI
-NTSTATUS
-NTAPI
-NtPowerInformation(
-    IN POWER_INFORMATION_LEVEL InformationLevel,
-    IN PVOID InputBuffer OPTIONAL,
-    IN ULONG InputBufferLength,
-    OUT PVOID OutputBuffer OPTIONAL,
-    IN ULONG OutputBufferLength);
-
-static inline void wrapCloseHandle(HANDLE* handle)
-{
-    if(*handle)
-        CloseHandle(*handle);
-}
 static inline void wrapSetupDiDestroyDeviceInfoList(HDEVINFO* hdev)
 {
     if(*hdev)
@@ -52,7 +40,7 @@ static const char* detectWithSetupApi(FFBatteryOptions* options, FFlist* results
         if(!SetupDiGetDeviceInterfaceDetailW(hdev, &did, pdidd, cbRequired, &cbRequired, NULL))
             continue;
 
-        HANDLE __attribute__((__cleanup__(wrapCloseHandle))) hBattery =
+        HANDLE FF_AUTO_CLOSE_FD hBattery =
             CreateFileW(pdidd->DevicePath, GENERIC_READ, FILE_SHARE_READ, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
 
         if(hBattery == INVALID_HANDLE_VALUE)
@@ -157,8 +145,6 @@ static const char* detectWithSetupApi(FFBatteryOptions* options, FFlist* results
     return NULL;
 }
 
-
-
 typedef struct FFSmbiosPortableBattery
 {
     FFSmbiosHeader Header;
@@ -181,11 +167,18 @@ typedef struct FFSmbiosPortableBattery
     uint8_t SbdsDeviceChemistry; // string
     uint8_t DesignCapacityMultiplier; // varies
     uint16_t OEMSpecific; // varies
-} FFSmbiosPortableBattery;
+} __attribute__((__packed__)) FFSmbiosPortableBattery;
+
+static_assert(offsetof(FFSmbiosPortableBattery, OEMSpecific) == 0x16,
+    "FFSmbiosPortableBattery: Wrong struct alignment");
 
 const char* detectBySmbios(FFBatteryResult* battery)
 {
-    const FFSmbiosPortableBattery* data = (const FFSmbiosPortableBattery*) (*ffGetSmbiosHeaderTable())[FF_SMBIOS_TYPE_PORTABLE_BATTERY];
+    const FFSmbiosHeaderTable* smbiosTable = ffGetSmbiosHeaderTable();
+    if (!smbiosTable)
+        return "Failed to get SMBIOS data";
+
+    const FFSmbiosPortableBattery* data = (const FFSmbiosPortableBattery*) (*smbiosTable)[FF_SMBIOS_TYPE_PORTABLE_BATTERY];
     if (!data)
         return "Portable battery section is not found in SMBIOS data";
 

src/detection/bios/bios_linux.c

@@ -4,7 +4,7 @@
 
 #include <stdlib.h>
 
-const char* ffDetectBios(FFBiosResult* bios)
+const char *ffDetectBios(FFBiosResult *bios)
 {
     ffGetSmbiosValue("/sys/devices/virtual/dmi/id/bios_date", "/sys/class/dmi/id/bios_date", &bios->date);
     ffGetSmbiosValue("/sys/devices/virtual/dmi/id/bios_release", "/sys/class/dmi/id/bios_release", &bios->release);

src/detection/bios/bios_windows.c

@@ -1,5 +1,6 @@
 #include "bios.h"
 #include "util/smbiosHelper.h"
+#include "util/windows/registry.h"
 
 #include <ntstatus.h>
 #include <winternl.h>
@@ -35,7 +36,7 @@ typedef struct FFSmbiosBios
     uint16_t BiosStartingAddressSegment; // varies
     uint8_t BiosReleaseDate; // string
     uint8_t BiosRomSize; // string
-    uint32_t BiosCharacteristics; // bit field
+    uint64_t BiosCharacteristics; // bit field
 
     // 2.4+
     uint8_t BiosCharacteristicsExtensionBytes[2]; // bit field
@@ -46,11 +47,18 @@ typedef struct FFSmbiosBios
 
     // 3.1+
     uint16_t ExtendedBiosRomSize; // bit field
-} FFSmbiosBios;
+} __attribute__((__packed__)) FFSmbiosBios;
+
+static_assert(offsetof(FFSmbiosBios, ExtendedBiosRomSize) == 0x18,
+    "FFSmbiosBios: Wrong struct alignment");
 
 const char* ffDetectBios(FFBiosResult* bios)
 {
-    const FFSmbiosBios* data = (const FFSmbiosBios*) (*ffGetSmbiosHeaderTable())[FF_SMBIOS_TYPE_BIOS];
+    const FFSmbiosHeaderTable* smbiosTable = ffGetSmbiosHeaderTable();
+    if (!smbiosTable)
+        return "Failed to get SMBIOS data";
+
+    const FFSmbiosBios* data = (const FFSmbiosBios*) (*smbiosTable)[FF_SMBIOS_TYPE_BIOS];
     if (!data)
         return "BIOS section is not found in SMBIOS data";
 

src/detection/board/board_windows.c

@@ -14,13 +14,20 @@ typedef struct FFSmbiosBaseboard
     uint8_t LocationInChassis; // string
     uint16_t ChassisHandle; // varies
     uint8_t BoardType; // enum
-    uint8_t NumberOfContainedObjectHandle; // varies
-    uint16_t ContainedObjectHandle[]; // varies
-} FFSmbiosBaseboard;
+    uint8_t NumberOfContainedObjectHandles; // varies
+    uint16_t ContainedObjectHandles[]; // varies
+} __attribute__((__packed__)) FFSmbiosBaseboard;
+
+static_assert(offsetof(FFSmbiosBaseboard, ContainedObjectHandles) == 0x0F,
+    "FFSmbiosBaseboard: Wrong struct alignment");
 
 const char* ffDetectBoard(FFBoardResult* board)
 {
-    const FFSmbiosBaseboard* data = (const FFSmbiosBaseboard*) (*ffGetSmbiosHeaderTable())[FF_SMBIOS_TYPE_BASEBOARD_INFO];
+    const FFSmbiosHeaderTable* smbiosTable = ffGetSmbiosHeaderTable();
+    if (!smbiosTable)
+        return "Failed to get SMBIOS data";
+
+    const FFSmbiosBaseboard* data = (const FFSmbiosBaseboard*) (*smbiosTable)[FF_SMBIOS_TYPE_BASEBOARD_INFO];
     if (!data)
         return "Baseboard information section is not found in SMBIOS data";
 

src/detection/bootmgr/bootmgr.c

@@ -0,0 +1,50 @@
+#include "efi_helper.h"
+
+static inline uint8_t evBits(uint16_t val, uint8_t mask, uint8_t shift)
+{
+    return (uint8_t) ((val & (mask << shift)) >> shift);
+}
+
+static void ffEfiUcs2ToUtf8(const uint16_t *const chars, FFstrbuf* result)
+{
+    for (uint32_t i = 0; chars[i]; i++)
+    {
+        if (chars[i] <= 0x007f)
+            ffStrbufAppendC(result, (char) chars[i]);
+        else if (chars[i] > 0x007f && chars[i] <= 0x07ff)
+        {
+            ffStrbufAppendC(result, (char) (0xc0 | evBits(chars[i], 0x1f, 6)));
+            ffStrbufAppendC(result, (char) (0x80 | evBits(chars[i], 0x3f, 0)));
+        }
+        else
+        {
+            ffStrbufAppendC(result, (char) (0xe0 | evBits(chars[i], 0xf, 12)));
+            ffStrbufAppendC(result, (char) (0x80 | evBits(chars[i], 0x3f, 6)));
+            ffStrbufAppendC(result, (char) (0x80 | evBits(chars[i], 0x3f, 0)));
+        }
+    }
+}
+
+bool ffEfiFillLoadOption(const FFEfiLoadOption* efiOption, FFBootmgrResult* result)
+{
+    uint32_t descLen = 0;
+    while (efiOption->Description[descLen]) ++descLen;
+
+    if (descLen)
+        ffEfiUcs2ToUtf8(efiOption->Description, &result->name);
+
+    for (
+        ffEfiDevicePathProtocol* filePathList = (void*) &efiOption->Description[descLen + 1];
+        filePathList->Type != 0x7F; // End of Hardware Device Path
+        filePathList = (void*) ((uint8_t*) filePathList + filePathList->Length))
+    {
+        if (filePathList->Type == 4 && filePathList->SubType == 4)
+        {
+            // https://uefi.org/specs/UEFI/2.10/10_Protocols_Device_Path_Protocol.html#file-path-media-device-path
+            ffEfiUcs2ToUtf8((uint16_t*) filePathList->SpecificDevicePathData, &result->firmware);
+            return true;
+        }
+    }
+
+    return false;
+}

src/detection/bootmgr/bootmgr.h

@@ -0,0 +1,12 @@
+#pragma once
+
+#include "fastfetch.h"
+
+typedef struct FFBootmgrResult
+{
+    FFstrbuf name;
+    FFstrbuf firmware;
+    bool secureBoot;
+} FFBootmgrResult;
+
+const char* ffDetectBootmgr(FFBootmgrResult* bios);

src/detection/bootmgr/bootmgr_apple.c

@@ -0,0 +1,12 @@
+#include "bootmgr.h"
+#include "common/io/io.h"
+
+const char* ffDetectBootmgr(FFBootmgrResult* result)
+{
+    if (ffPathExists("/System/Library/CoreServices/boot.efi", FF_PATHTYPE_FILE))
+        ffStrbufSetStatic(&result->firmware, "/System/Library/CoreServices/boot.efi");
+
+    ffStrbufSetStatic(&result->name, "iBoot");
+
+    return NULL;
+}

src/detection/bootmgr/bootmgr_bsd.c

@@ -0,0 +1,43 @@
+#include "bootmgr.h"
+#include "efi_helper.h"
+#include "common/io/io.h"
+
+#include <sys/efiio.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>
+
+const char* ffDetectBootmgr(FFBootmgrResult* result)
+{
+    FF_AUTO_CLOSE_FD int efifd = open("/dev/efi", O_RDWR);
+    if (efifd < 0) return "open(/dev/efi) failed";
+
+    uint8_t buffer[2048];
+    struct efi_var_ioc ioc = {
+        .vendor = { 0x8be4df61, 0x93ca, 0x11d2, 0xaa, 0x0d, { 0x00, 0xe0, 0x98, 0x03, 0x2b, 0x8c } },
+        .data = buffer,
+    };
+
+    ioc.datasize = sizeof(buffer);
+    ioc.name = (efi_char[]){ 'B', 'o', 'o', 't', 'C', 'u', 'r', 'r', 'e', 'n', 't', '\0' };
+    ioc.namesize = sizeof("BootCurrent") * 2;
+    if (ioctl(efifd, EFIIOC_VAR_GET, &ioc) < 0 || ioc.datasize != 2)
+        return "ioctl(EFIIOC_VAR_GET, BootCurrent) failed";
+
+    unsigned char hex[5];
+    snprintf((char*) hex, sizeof(hex), "%04X", *(uint16_t*)buffer);
+    ioc.datasize = sizeof(buffer);
+    ioc.name = (efi_char[]){ 'B', 'o', 'o', 't', hex[0], hex[1], hex[2], hex[3], '\0' };
+    ioc.namesize = sizeof("Boot####") * 2;
+    if (ioctl(efifd, EFIIOC_VAR_GET, &ioc) < 0 || ioc.datasize == sizeof(buffer))
+        return "ioctl(EFIIOC_VAR_GET, Boot####) failed";
+
+    ffEfiFillLoadOption((FFEfiLoadOption *)buffer, result);
+
+    ioc.name = (efi_char[]){ 'S', 'e', 'c', 'u', 'r', 'e', 'B', 'o', 'o', 't', '\0' };
+    ioc.namesize = sizeof("SecureBoot") * 2;
+    ioc.datasize = sizeof(buffer);
+    if (ioctl(efifd, EFIIOC_VAR_GET, &ioc) == 0 && ioc.datasize == 1)
+        result->secureBoot = !!buffer[0];
+
+    return NULL;
+}

src/detection/bootmgr/bootmgr_linux.c

@@ -0,0 +1,27 @@
+#include "bootmgr.h"
+#include "common/io/io.h"
+#include "efi_helper.h"
+
+#define FF_EFIVARS_PATH_PREFIX "/sys/firmware/efi/efivars/"
+
+const char* ffDetectBootmgr(FFBootmgrResult* result)
+{
+    uint8_t buffer[2048];
+
+    if (ffReadFileData(FF_EFIVARS_PATH_PREFIX "BootCurrent-" FF_EFI_GLOBAL_GUID, sizeof(buffer), buffer) != 6)
+        return "Failed to read efivar: BootCurrent";
+
+    uint16_t value = *(uint16_t *)&buffer[4];
+    snprintf((char*) buffer, sizeof(buffer), FF_EFIVARS_PATH_PREFIX "Boot%04X-" FF_EFI_GLOBAL_GUID, value);
+
+    ssize_t size = ffReadFileData((const char*) buffer, sizeof(buffer), buffer);
+    if (size < 5 + (int) sizeof(FFEfiLoadOption) || size == (ssize_t) sizeof(buffer))
+        return "Failed to read efivar: Boot####";
+
+    ffEfiFillLoadOption((FFEfiLoadOption *)&buffer[4], result);
+
+    if (ffReadFileData(FF_EFIVARS_PATH_PREFIX "SecureBoot-" FF_EFI_GLOBAL_GUID, sizeof(buffer), buffer) == 6)
+        result->secureBoot = buffer[4] == 1;
+
+    return NULL;
+}

src/detection/bootmgr/bootmgr_nosupport.c

@@ -0,0 +1,6 @@
+#include "bootmgr.h"
+
+const char* ffDetectBootmgr(FF_MAYBE_UNUSED FFBootmgrResult* result)
+{
+    return "Not supported on this platform";
+}

src/detection/bootmgr/bootmgr_windows.c

@@ -0,0 +1,53 @@
+#include "bootmgr.h"
+#include "efi_helper.h"
+
+#include <windows.h>
+
+const char* enablePrivilege(const wchar_t* privilege)
+{
+    HANDLE token;
+    if (!OpenProcessToken(GetCurrentProcess(), TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY, &token))
+        return "OpenProcessToken() failed";
+
+    TOKEN_PRIVILEGES tp = {
+        .PrivilegeCount = 1,
+        .Privileges = {
+            (LUID_AND_ATTRIBUTES) { .Attributes = SE_PRIVILEGE_ENABLED }
+        },
+    };
+    if (!LookupPrivilegeValueW(NULL, privilege, &tp.Privileges[0].Luid))
+        return "LookupPrivilegeValue() failed";
+
+    if (!AdjustTokenPrivileges(token, false, &tp, sizeof(tp), NULL, NULL))
+        return "AdjustTokenPrivileges() failed";
+
+    if (GetLastError() == ERROR_NOT_ALL_ASSIGNED)
+        return "The token does not have the specified privilege";
+
+    return NULL;
+}
+
+const char* ffDetectBootmgr(FFBootmgrResult* result)
+{
+    if (enablePrivilege(L"SeSystemEnvironmentPrivilege") != NULL)
+        return "Failed to enable SeSystemEnvironmentPrivilege";
+
+    uint16_t value;
+    if (GetFirmwareEnvironmentVariableW(L"BootCurrent", L"{" FF_EFI_GLOBAL_GUID L"}", &value, sizeof(value)) != 2)
+        return "GetFirmwareEnvironmentVariableW(BootCurrent) failed";
+
+    uint8_t buffer[2048];
+    wchar_t key[16];
+    wsprintfW(key, L"Boot%04X", value);
+    uint32_t size = GetFirmwareEnvironmentVariableW(key, L"{" FF_EFI_GLOBAL_GUID L"}", buffer, sizeof(buffer));
+    if (size < sizeof(FFEfiLoadOption) || size == sizeof(buffer))
+        return "GetFirmwareEnvironmentVariableW(Boot####) failed";
+
+    ffEfiFillLoadOption((FFEfiLoadOption *)buffer, result);
+
+    DWORD uefiSecureBootEnabled = 0, bufSize = 0;
+    if (RegGetValueW(HKEY_LOCAL_MACHINE, L"SYSTEM\\ControlSet001\\Control\\SecureBoot\\State", L"UEFISecureBootEnabled", RRF_RT_REG_DWORD, NULL, &uefiSecureBootEnabled, &bufSize) == ERROR_SUCCESS)
+        result->secureBoot = !!uefiSecureBootEnabled;
+
+    return NULL;
+}

src/detection/bootmgr/efi_helper.h

@@ -0,0 +1,24 @@
+#include "bootmgr.h"
+
+// https://uefi.org/specs/UEFI/2.10/10_Protocols_Device_Path_Protocol.html#generic-device-path-structures
+typedef struct ffEfiDevicePathProtocol
+{
+    uint8_t Type;
+    uint8_t SubType;
+    uint16_t Length;
+    uint8_t SpecificDevicePathData[];
+} ffEfiDevicePathProtocol;
+
+// https://uefi.org/specs/UEFI/2.10/03_Boot_Manager.html#load-options
+typedef struct FFEfiLoadOption
+{
+    uint32_t Attributes;
+    uint16_t FilePathListLength;
+    uint16_t Description[];
+    // ffEfiDevicePathProtocol FilePathList[];
+    // uint8_t OptionalData[];
+} FFEfiLoadOption;
+
+bool ffEfiFillLoadOption(const FFEfiLoadOption* efiOption, FFBootmgrResult* result);
+
+#define FF_EFI_GLOBAL_GUID "8be4df61-93ca-11d2-aa0d-00e098032b8c"

src/detection/brightness/brightness_linux.c

@@ -114,7 +114,7 @@ static const char* detectWithDdcci(FFBrightnessOptions* options, FFlist* result)
     {
         FF_SUPPRESS_IO();
         // Ref: https://github.com/rockowitz/ddcutil/issues/344
-        if (ffddca_init("--disable-watch-displays", -1 /*DDCA_SYSLOG_NOT_SET*/, 1 /*DDCA_INIT_OPTIONS_DISABLE_CONFIG_FILE*/) < 0)
+        if (ffddca_init(NULL, -1 /*DDCA_SYSLOG_NOT_SET*/, 1 /*DDCA_INIT_OPTIONS_DISABLE_CONFIG_FILE*/) < 0)
             return "ddca_init() failed";
     }
     else

src/detection/camera/camera.h

@@ -0,0 +1,15 @@
+#pragma once
+
+#include "fastfetch.h"
+
+typedef struct FFCameraResult
+{
+    FFstrbuf name;
+    FFstrbuf vendor;
+    FFstrbuf id;
+    FFstrbuf colorspace;
+    uint32_t width;
+    uint32_t height;
+} FFCameraResult;
+
+const char* ffDetectCamera(FFlist* result /* list of FFCameraResult */);

src/detection/camera/camera_android.c

@@ -0,0 +1,61 @@
+#include "camera.h"
+
+#include "common/processing.h"
+#include "common/properties.h"
+
+#define FF_TERMUX_API_PATH FASTFETCH_TARGET_DIR_ROOT "/libexec/termux-api"
+#define FF_TERMUX_API_PARAM "CameraInfo"
+
+static inline void wrapYyjsonFree(yyjson_doc** doc)
+{
+    assert(doc);
+    if (*doc)
+        yyjson_doc_free(*doc);
+}
+
+const char* ffDetectCamera(FF_MAYBE_UNUSED FFlist* result)
+{
+    FF_STRBUF_AUTO_DESTROY buffer = ffStrbufCreate();
+
+    if(ffProcessAppendStdOut(&buffer, (char* const[]){
+        FF_TERMUX_API_PATH,
+        FF_TERMUX_API_PARAM,
+        NULL
+    }))
+        return "Starting `" FF_TERMUX_API_PATH " " FF_TERMUX_API_PARAM "` failed";
+
+    yyjson_doc* __attribute__((__cleanup__(wrapYyjsonFree))) doc = yyjson_read_opts(buffer.chars, buffer.length, 0, NULL, NULL);
+    if (!doc)
+        return "Failed to parse camera info";
+
+    yyjson_val* root = yyjson_doc_get_root(doc);
+    if (!yyjson_is_arr(root))
+        return "Camera info result is not a JSON array";
+
+    yyjson_val* device;
+    size_t idx, max;
+    yyjson_arr_foreach(root, idx, max, device)
+    {
+        FFCameraResult* camera = (FFCameraResult*) ffListAdd(result);
+        {
+            const char* facing = yyjson_get_str(yyjson_obj_get(device, "facing"));
+            if (facing)
+                ffStrbufInitF(&camera->name, "builtin-%s", facing);
+            else
+                ffStrbufInitStatic(&camera->name, "Unknown");
+        }
+        ffStrbufInit(&camera->vendor);
+        ffStrbufInitS(&camera->id, yyjson_get_str(yyjson_obj_get(device, "id")));
+        yyjson_val* sizes = yyjson_arr_get_first(yyjson_obj_get(device, "jpeg_output_sizes"));
+        if (yyjson_is_obj(sizes))
+        {
+            camera->width = (uint32_t) yyjson_get_uint(yyjson_obj_get(sizes, "width"));
+            camera->height = (uint32_t) yyjson_get_uint(yyjson_obj_get(sizes, "height"));
+        }
+        else
+            camera->width = camera->height = 0;
+        ffStrbufInit(&camera->colorspace);
+    }
+
+    return NULL;
+}

src/detection/camera/camera_apple.m

@@ -0,0 +1,55 @@
+#include "camera.h"
+#include "common/io/io.h"
+
+#import <AVFoundation/AVCaptureDevice.h>
+
+// warning: 'AVCaptureDeviceTypeExternalUnknown' is deprecated
+#pragma GCC diagnostic ignored "-Wdeprecated-declarations"
+
+const char* ffDetectCamera(FFlist* result)
+{
+    #ifdef MAC_OS_X_VERSION_10_15
+    FF_SUPPRESS_IO(); // #822
+
+    AVCaptureDeviceType deviceType;
+
+    #ifdef MAC_OS_VERSION_14_0
+    if (@available(macOS 14.0, *))
+    {
+        deviceType = AVCaptureDeviceTypeExternal;
+    }
+    else
+    #endif
+    {
+        deviceType = AVCaptureDeviceTypeExternalUnknown;
+    }
+
+    AVCaptureDeviceDiscoverySession* session = [AVCaptureDeviceDiscoverySession discoverySessionWithDeviceTypes:@[AVCaptureDeviceTypeBuiltInWideAngleCamera, deviceType]
+                                                                                mediaType:AVMediaTypeVideo
+                                                                                position:AVCaptureDevicePositionUnspecified];
+    if (!session)
+        return "Failed to create AVCaptureDeviceDiscoverySession";
+
+    for (AVCaptureDevice* device in session.devices)
+    {
+        FFCameraResult* camera = (FFCameraResult*) ffListAdd(result);
+        ffStrbufInitS(&camera->name, device.localizedName.UTF8String);
+        ffStrbufInitS(&camera->vendor, device.manufacturer.UTF8String);
+        ffStrbufInitS(&camera->id, device.uniqueID.UTF8String);
+        switch (device.activeColorSpace)
+        {
+            case AVCaptureColorSpace_sRGB: ffStrbufInitStatic(&camera->colorspace, "sRGB"); break;
+            case AVCaptureColorSpace_P3_D65: ffStrbufInitStatic(&camera->colorspace, "P3-D65"); break;
+            case 2 /*AVCaptureColorSpace_HLG_BT2020*/: ffStrbufInitStatic(&camera->colorspace, "BT2020-HLG"); break;
+            case 3 /*AVCaptureColorSpace_AppleLog*/: ffStrbufInitStatic(&camera->colorspace, "AppleLog"); break;
+        }
+
+        CMVideoDimensions size = CMVideoFormatDescriptionGetDimensions(device.activeFormat.formatDescription);
+        camera->width = size.width < 0 ? 0 : (uint32_t) size.width;
+        camera->height = size.height < 0 ? 0 : (uint32_t) size.height;
+    }
+    return NULL;
+    #else
+    return "No support for old MacOS version";
+    #endif
+}