Technitium DNS: read the version from its GitHub releases

The version came from scraping technitium.com, which failed for some hosts ("Command substitution exited with status 1", 6 runs on 4 hosts in three days) and has no rate-limit fallback. The GitHub release carries the same version and goes through the engine's release lookup.

.github/DISCUSSION_TEMPLATE/request-script.yml

@@ -58,9 +58,9 @@ body:
 
         Before continuing, verify that the requested project meets the minimum requirements below.
 
-        **Projects with fewer than 1,000 stars, or younger than 6 months, are generally not eligible for a script request.**
+        **Projects with fewer than 1,000 stars are generally not eligible for a script request.**
 
-        An automated check verifies the star count and project age for GitHub-hosted projects. If the project doesn't meet these requirements, fill in **Justification for an exception** below — without one, the request is closed automatically. With one, it's flagged for manual review instead. Exceptions are rare and require a clearly verifiable, significant public adoption signal.
+        Exceptions are only considered where there is a clearly verifiable, significant public adoption signal.
 
   - type: input
     id: repository-stars
@@ -134,22 +134,6 @@ body:
         - label: I understand that requests outside the project scope may be closed without an extensive explanation.
           required: true
 
-  - type: textarea
-    id: justification
-    attributes:
-      label: Justification for an exception
-      description: >-
-        Only needed if the project has fewer than 1,000 stars or is younger than 6 months (e.g. it has no GitHub
-        presence, so stars don't apply). Explain the significant public adoption signal. Leave blank if the project
-        meets the normal requirements — requests that don't meet the requirements and have no justification here are
-        closed automatically.
-      placeholder: |
-        Example:
-        No public GitHub repository, but the project has 50k+ active installs reported by its own telemetry
-        dashboard and is covered by several established self-hosting publications.
-    validations:
-      required: false
-
   - type: markdown
     attributes:
       value: |

.github/pull_request_template.md

@@ -17,6 +17,16 @@ Fixes #
 **Tested on:** <!-- e.g. PVE 9.2 / Debian 13 / fresh install + update. Write "not tested" if you could not run it. -->
 
 
+---
+
+## 🤖 AI Assistance (**X** in brackets)
+
+> If you used an AI tool (GitHub Copilot, Claude, ChatGPT, etc.) to write or generate any scripts in this PR, you **must** confirm compliance below.  
+> Select exactly one option.
+
+- [ ] **No AI used** – Scripts were written without AI assistance.
+- [ ] **AI was used** – I confirm the scripts were built using [`AGENTS.md`](https://github.com/community-scripts/DevScripts/blob/main/AGENTS.md) and [`.github/agents/pve-script-creator.agent.md`](https://github.com/community-scripts/DevScripts/blob/main/.github/agents/pve-script-creator.agent.md) as guidance, and the output has been reviewed and corrected to match those guidelines.
+
 ---
 
 ## 🛠️ Type of Change (**X** in brackets)
@@ -60,13 +70,3 @@ Guidance:
 -->
 
 <!-- The advisory block is only active once it is OUTSIDE this comment. -->
-
----
-
-## 🤖 AI Assistance (**X** in brackets)
-
-> If you used an AI tool (GitHub Copilot, Claude, ChatGPT, etc.) to write or generate any scripts in this PR, you **must** confirm compliance below.  
-> Select exactly one option.
-
-- [ ] **No AI used** – Scripts were written without AI assistance.
-- [ ] **AI was used** – I confirm the scripts were built using [`AGENTS.md`](https://github.com/community-scripts/DevScripts/blob/main/AGENTS.md) and [`.github/agents/pve-script-creator.agent.md`](https://github.com/community-scripts/DevScripts/blob/main/.github/agents/pve-script-creator.agent.md) as guidance, and the output has been reviewed and corrected to match those guidelines.

.github/workflows/close-invalid-pr-template.yml

@@ -1,4 +1,4 @@
-name: Flag PRs Missing Template
+name: Close PRs Missing Template
 
 on:
   pull_request_target:
@@ -14,12 +14,10 @@ jobs:
       issues: write
       contents: read
     steps:
-      - name: Check PR against the template, comment and label instead of closing
+      - name: Close PR if it does not follow the PR template
         uses: actions/github-script@v9
         with:
           script: |
-            const MARKER = "<!-- pr-template-check -->";
-            const LABELS = ["missing pr template", "stale"];
             const pr = context.payload.pull_request;
             const prNumber = pr.number;
             const author = pr.user.login;
@@ -46,11 +44,11 @@ jobs:
               return;
             }
 
-            const prLabels = pr.labels.map((label) => label.name);
+            const labels = pr.labels.map((label) => label.name);
             const skipLabels = ["automated pr", "keep-open"];
 
-            if (skipLabels.some((label) => prLabels.includes(label))) {
+            if (skipLabels.some((label) => labels.includes(label))) {
-              core.info(`PR #${prNumber} has a skip label (${prLabels.join(", ")}) — skipping template validation.`);
+              core.info(`PR #${prNumber} has a skip label (${labels.join(", ")}) — skipping template validation.`);
               return;
             }
 
@@ -116,52 +114,50 @@ jobs:
               failures.push("At least one **Type of Change** checkbox must be checked.");
             }
 
-            const comments = await github.paginate(github.rest.issues.listComments, {
-              owner, repo, issue_number: prNumber, per_page: 100
-            });
-            const mine = comments.find(c => c.body && c.body.includes(MARKER));
-
             if (failures.length === 0) {
               core.info(`PR #${prNumber} follows the PR template.`);
-              if (mine && !mine.body.startsWith(MARKER + "\n✅")) {
-                await github.rest.issues.updateComment({
-                  owner, repo, comment_id: mine.id,
-                  body: MARKER + "\n✅ **Template check passed.** Thanks for fixing the description — the `stale` mark has been removed.",
-                });
-              }
-              for (const name of LABELS) {
-                if (prLabels.includes(name)) {
-                  await github.rest.issues.removeLabel({ owner, repo, issue_number: prNumber, name });
-                }
-              }
               return;
             }
 
-            core.info(`PR #${prNumber} — template validation failed, flagging instead of closing.`);
+            core.info(`Closing PR #${prNumber} — template validation failed.`);
 
             const templateUrl =
               "https://github.com/community-scripts/ProxmoxVE/blob/main/.github/pull_request_template.md";
             const failureList = failures.map((item) => `- ${item}`).join("\n");
 
-            const text =
+            const comment = [
-              MARKER + "\n" +
+              `👋 Hi @${author},`,
-              `👋 Hi @${author},\n\n` +
+              ``,
-              `This pull request does not follow the [PR template](${templateUrl}) yet:\n\n` +
+              `This pull request was closed because it does not follow the [PR template](${templateUrl}).`,
-              failureList + "\n\n" +
+              ``,
-              `**Edit the PR description** to fix it — no new PR needed. This check runs again on every edit and clears itself once everything is in place.\n\n` +
+              `Please fix the following and open a new PR (or reopen this one after updating the description):`,
-              `Until then the PR is marked \`stale\` and will be closed in **7 days**.\n\n` +
+              ``,
-              `Maintainers can add the \`keep-open\` label to exempt a PR from this check.\n\n` +
+              failureList,
-              `Thank you for contributing! 🙏`;
+              ``,
+              `> Use the template sections, fill in the description, check all prerequisite boxes, and select at least one type of change.`,
+              ``,
+              `Maintainers can add the \`keep-open\` label to exempt a PR from this check.`,
+              ``,
+              `Thank you for contributing! 🙏`,
+            ].join("\n");
 
-            if (mine) {
+            await github.rest.issues.createComment({
-              if (mine.body !== text) {
+              owner,
-                await github.rest.issues.updateComment({ owner, repo, comment_id: mine.id, body: text });
+              repo,
-              }
+              issue_number: prNumber,
-            } else {
+              body: comment,
-              await github.rest.issues.createComment({ owner, repo, issue_number: prNumber, body: text });
+            });
-            }
 
-            const toAdd = LABELS.filter(name => !prLabels.includes(name));
+            await github.rest.pulls.update({
-            if (toAdd.length > 0) {
+              owner,
-              await github.rest.issues.addLabels({ owner, repo, issue_number: prNumber, labels: toAdd });
+              repo,
-            }
+              pull_number: prNumber,
+              state: "closed",
+            });
+
+            await github.rest.issues.addLabels({
+              owner,
+              repo,
+              issue_number: prNumber,
+              labels: ["missing pr template"],
+            });

.github/workflows/request-script-eligibility.yml

@@ -1,141 +0,0 @@
-name: Request Script Eligibility Check
-
-# category.slug is the same string GitHub uses in the "new discussion" URL
-# (?category=request-script, linked from every repo's issue chooser), so this
-# guard matches the live category without needing its numeric id.
-on:
-  discussion:
-    types: [created, edited, reopened]
-
-jobs:
-  check-eligibility:
-    if: github.repository == 'community-scripts/ProxmoxVE' && github.event.discussion.category.slug == 'request-script'
-    runs-on: ubuntu-latest
-    permissions:
-      discussions: write
-      issues: write
-      contents: read
-    steps:
-      - name: Verify stars/age, flag or close
-        uses: actions/github-script@v9
-        with:
-          script: |
-            const owner = context.repo.owner;
-            const repo = context.repo.repo;
-            const discussion = context.payload.discussion;
-
-            if (!discussion || discussion.state === "closed") {
-              core.info("Discussion missing or already closed — skipping.");
-              return;
-            }
-
-            const body = discussion.body || "";
-            const lines = body.split("\n");
-            const fields = {};
-            let current = null;
-            for (const line of lines) {
-              const m = line.match(/^###\s+(.+?)\s*$/);
-              if (m) {
-                current = m[1].trim();
-                fields[current] = [];
-              } else if (current) {
-                fields[current].push(line);
-              }
-            }
-            function fieldText(label) {
-              const raw = (fields[label] || []).join("\n").trim();
-              return raw === "_No response_" ? "" : raw;
-            }
-
-            const sourceRepo = fieldText("Source Repository");
-            const justification = fieldText("Justification for an exception");
-
-            let eligible = false;
-            let verified = false;
-            const ghMatch = sourceRepo.match(/^https?:\/\/(?:www\.)?github\.com\/([^\/\s]+)\/([^\/\s#?]+?)(?:\.git)?\/?(?:[#?].*)?$/i);
-
-            if (ghMatch) {
-              const [, repoOwner, repoName] = ghMatch;
-              try {
-                const { data: repoData } = await github.rest.repos.get({ owner: repoOwner, repo: repoName });
-                const stars = repoData.stargazers_count;
-                const createdAt = new Date(repoData.created_at);
-                const now = new Date();
-                const ageMonths =
-                  (now.getFullYear() - createdAt.getFullYear()) * 12 +
-                  (now.getMonth() - createdAt.getMonth()) -
-                  (now.getDate() < createdAt.getDate() ? 1 : 0);
-                eligible = stars >= 1000 && ageMonths >= 6;
-                verified = true;
-                core.info(`Verified ${repoOwner}/${repoName}: ${stars} stars, ${ageMonths} months old, eligible=${eligible}`);
-              } catch (err) {
-                core.warning(`Could not verify ${repoOwner}/${repoName}: ${err.message} — treating as unverifiable.`);
-              }
-            } else {
-              core.info("Source Repository is not a github.com URL — cannot auto-verify, treating as unverifiable.");
-            }
-
-            if (eligible) {
-              core.info(`Discussion #${discussion.number} meets the requirements — no action.`);
-              return;
-            }
-
-            const labels = (discussion.labels || []).map(l => l.name);
-            const reasonLine = verified
-              ? "the source repository does not meet the 1,000-star / 6-month minimum adoption requirement"
-              : "the source repository's star count and age could not be verified automatically";
-
-            if (justification) {
-              if (labels.includes("investigation")) {
-                core.info(`Discussion #${discussion.number} already flagged for investigation — skipping.`);
-                return;
-              }
-
-              try {
-                await github.rest.issues.createLabel({
-                  owner, repo, name: "investigation",
-                  color: "fbca04",
-                  description: "Below the normal script-request threshold; a justification was given and needs maintainer review.",
-                });
-              } catch (err) {
-                if (err.status !== 422) throw err;
-              }
-
-              const labelQuery = await github.graphql(
-                `query($owner: String!, $repo: String!) { repository(owner: $owner, name: $repo) { label(name: "investigation") { id } } }`,
-                { owner, repo }
-              );
-              const labelNodeId = labelQuery.repository.label.id;
-
-              await github.graphql(
-                `mutation($labelableId: ID!, $labelIds: [ID!]!) { addLabelsToLabelable(input: { labelableId: $labelableId, labelIds: $labelIds }) { clientMutationId } }`,
-                { labelableId: discussion.node_id, labelIds: [labelNodeId] }
-              );
-
-              await github.graphql(
-                `mutation($discussionId: ID!, $body: String!) { addDiscussionComment(input: { discussionId: $discussionId, body: $body }) { comment { id } } }`,
-                {
-                  discussionId: discussion.node_id,
-                  body:
-                    `Thanks for the justification — ${reasonLine}, so this has been flagged \`investigation\` for a maintainer ` +
-                    `to review manually rather than closed automatically.`,
-                }
-              );
-            } else {
-              await github.graphql(
-                `mutation($discussionId: ID!, $body: String!) { addDiscussionComment(input: { discussionId: $discussionId, body: $body }) { comment { id } } }`,
-                {
-                  discussionId: discussion.node_id,
-                  body:
-                    `This request doesn't meet the minimum requirements (1,000 stars, project at least 6 months old) — ` +
-                    `${reasonLine}, and no justification was given. Closing automatically.\n\n` +
-                    `If you believe this project qualifies for an exception, edit this discussion to fill in ` +
-                    `**Justification for an exception** and reopen it — it will then be flagged for manual review instead of closed again.`,
-                }
-              );
-
-              await github.graphql(
-                `mutation($discussionId: ID!) { closeDiscussion(input: { discussionId: $discussionId, reason: OUTDATED }) { discussion { id } } }`,
-                { discussionId: discussion.node_id }
-              );
-            }

.github/workflows/stale_pr_close.yml

@@ -22,112 +22,90 @@ jobs:
             const now = new Date();
             const owner = context.repo.owner;
             const repo = context.repo.repo;
-            const TEMPLATE_LABEL = "missing pr template";
+            
-            const MAINTAINERS = ["OWNER", "MEMBER", "COLLABORATOR"];
+            // --- When stale label is added, comment immediately ---
-            const days = d => (now - d) / (1000 * 60 * 60 * 24);
-            const staleNotice = author =>
-              `@${author} This PR has been marked as stale. It will be closed if no new commits are added in 7 days.`;
-
-            // Only fires for a maintainer's label: labels set with GITHUB_TOKEN raise no event.
             if (context.eventName === "pull_request_target" && context.payload.action === "labeled") {
-              const pr = context.payload.pull_request;
+              const label = context.payload.label?.name;
-              const labels = (pr.labels || []).map(l => l.name);
+              if (label === "stale") {
-              if (context.payload.label?.name === "stale" && !labels.includes(TEMPLATE_LABEL)) {
+                const author = context.payload.pull_request.user.login;
                 await github.rest.issues.createComment({
-                  owner, repo, issue_number: pr.number, body: staleNotice(pr.user.login)
+                  owner,
+                  repo,
+                  issue_number: context.payload.pull_request.number,
+                  body: `@${author} This PR has been marked as stale. It will be closed if no new commits are added in 7 days.`
                 });
               }
               return;
             }
-
+            
-            const prs = await github.paginate(github.rest.pulls.list, { owner, repo, state: "open", per_page: 100 });
+            // --- Scheduled run: check all stale PRs ---
-
+            const { data: prs } = await github.rest.pulls.list({
+              owner,
+              repo,
+              state: "open",
+              per_page: 100
+            });
+            
             for (const pr of prs) {
-              const labels = pr.labels.map(l => l.name);
+              const hasStale = pr.labels.some(l => l.name === "stale");
-              const author = pr.user.login;
+              if (!hasStale) continue;
-              const hasStale = labels.includes("stale");
+              
-
+              // Get timeline events to find when stale label was added
-              if (labels.includes("keep-open")) {
+              const { data: events } = await github.rest.issues.listEvents({
-                if (hasStale) {
+                owner,
-                  await github.rest.issues.removeLabel({ owner, repo, issue_number: pr.number, name: "stale" });
+                repo,
-                }
+                issue_number: pr.number,
-                continue;
+                per_page: 100
-              }
-
-              const comments = await github.paginate(github.rest.issues.listComments, {
-                owner, repo, issue_number: pr.number, per_page: 100
               });
-              const commits = await github.paginate(github.rest.pulls.listCommits, {
+              
-                owner, repo, pull_number: pr.number, per_page: 100
+              // Find the most recent time the stale label was added
-              });
+              const staleLabelEvents = events
-              const lastCommitDate = commits.length > 0
-                ? new Date(commits[commits.length - 1].commit.author.date)
-                : new Date(pr.created_at);
-              const humanComments = comments.filter(c => c.user?.type !== "Bot");
-
-              // -------------------------------------------------------
-              // Auto-label PRs with no activity in the last 14 days,
-              // but ONLY if someone other than the author has engaged.
-              // -------------------------------------------------------
-              if (!hasStale) {
-                const reviews = await github.paginate(github.rest.pulls.listReviews, {
-                  owner, repo, pull_number: pr.number, per_page: 100
-                });
-                const engaged =
-                  reviews.some(r => r.user?.type !== "Bot" && r.user?.login !== author) ||
-                  humanComments.some(c => c.user?.login !== author);
-                if (!engaged) continue;
-
-                const lastCommentDate = humanComments.length > 0
-                  ? new Date(humanComments[humanComments.length - 1].created_at)
-                  : null;
-                const lastActivityDate = lastCommentDate && lastCommentDate > lastCommitDate
-                  ? lastCommentDate
-                  : lastCommitDate;
-
-                if (days(lastActivityDate) > 14) {
-                  await github.rest.issues.addLabels({ owner, repo, issue_number: pr.number, labels: ["stale"] });
-                  await github.rest.issues.createComment({ owner, repo, issue_number: pr.number, body: staleNotice(author) });
-                }
-                continue;
-              }
-
-              // -------------------------------------------------------
-              // Manage already-stale PRs
-              // -------------------------------------------------------
-              const events = await github.paginate(github.rest.issues.listEvents, {
-                owner, repo, issue_number: pr.number, per_page: 100
-              });
-              const staleDates = events
                 .filter(e => e.event === "labeled" && e.label?.name === "stale")
-                .map(e => new Date(e.created_at));
+                .sort((a, b) => new Date(b.created_at) - new Date(a.created_at));
-              if (staleDates.length === 0) continue;
+              
-              const staleLabelDate = new Date(Math.max(...staleDates));
+              if (staleLabelEvents.length === 0) continue;
-              const isTemplateIssue = labels.includes(TEMPLATE_LABEL);
+              
-
+              const staleLabelDate = new Date(staleLabelEvents[0].created_at);
-              // A push ends an inactivity mark; a template mark only ends via close-invalid-pr-template.yml's re-check.
+              const daysSinceStale = (now - staleLabelDate) / (1000 * 60 * 60 * 24);
-              if (!isTemplateIssue && lastCommitDate > staleLabelDate) {
+              
-                await github.rest.issues.removeLabel({ owner, repo, issue_number: pr.number, name: "stale" });
+              // Check for new commits since stale label was added
+              const { data: commits } = await github.rest.pulls.listCommits({
+                owner,
+                repo,
+                pull_number: pr.number
+              });
+              
+              const lastCommitDate = new Date(commits[commits.length - 1].commit.author.date);
+              const author = pr.user.login;
+              
+              // If there are new commits after the stale label, remove it
+              if (lastCommitDate > staleLabelDate) {
+                await github.rest.issues.removeLabel({
+                  owner,
+                  repo,
+                  issue_number: pr.number,
+                  name: "stale"
+                });
                 await github.rest.issues.createComment({
-                  owner, repo, issue_number: pr.number,
+                  owner,
+                  repo,
+                  issue_number: pr.number,
                   body: `@${author} Recent activity detected. Removing stale label.`
                 });
-                continue;
               }
-
+              // If 7 days have passed since stale label, close the PR
-              // A maintainer comment after the mark restarts the 7 days.
+              else if (daysSinceStale > 7) {
-              const maintainerDates = humanComments
+                await github.rest.pulls.update({
-                .filter(c => MAINTAINERS.includes(c.author_association) && c.user?.login !== author)
+                  owner,
-                .map(c => new Date(c.created_at))
+                  repo,
-                .filter(d => d > staleLabelDate);
+                  pull_number: pr.number,
-              const clockStart = maintainerDates.length > 0 ? new Date(Math.max(...maintainerDates)) : staleLabelDate;
+                  state: "closed"
-              if (days(clockStart) <= 7) continue;
+                });
-
+                await github.rest.issues.createComment({
-              await github.rest.issues.createComment({
+                  owner,
-                owner, repo, issue_number: pr.number,
+                  repo,
-                body: isTemplateIssue
+                  issue_number: pr.number,
-                  ? `@${author} Closing: the PR template requirements listed above were still missing 7 days later. Once they are in place, please open a new pull request.`
+                  body: `@${author} Closing stale PR due to inactivity (no commits for 7 days after stale label).`
-                  : `@${author} Closing stale PR due to inactivity (no commits for 7 days after stale label).`
+                });
-              });
+              }
-              await github.rest.pulls.update({ owner, repo, pull_number: pr.number, state: "closed" });
             }

CHANGELOG.md

@@ -577,63 +577,17 @@ Exercise vigilance regarding copycat or coat-tailing sites that seek to exploit
 
   - #### 🐞 Bug Fixes
 
-    - Fedora VM: let the engine install libguestfs-tools [@MickLesk](https://github.com/MickLesk) ([#18422](https://github.com/community-scripts/ProxmoxVE/pull/18422))
-    - Cinephage: run the camoufox binary the package now ships [@MickLesk](https://github.com/MickLesk) ([#18426](https://github.com/community-scripts/ProxmoxVE/pull/18426))
-    - AlmaLinux VM: report failures through the engine's error handler [@MickLesk](https://github.com/MickLesk) ([#18418](https://github.com/community-scripts/ProxmoxVE/pull/18418))
-    - WireGuard: give the Debian container 1 GB for WGDashboard [@MickLesk](https://github.com/MickLesk) ([#18419](https://github.com/community-scripts/ProxmoxVE/pull/18419))
-    - zabbix: use os specific apt packages [@MickLesk](https://github.com/MickLesk) ([#18417](https://github.com/community-scripts/ProxmoxVE/pull/18417))
-    - Discourse: build libvips 8.18 for its image worker [@MickLesk](https://github.com/MickLesk) ([#18430](https://github.com/community-scripts/ProxmoxVE/pull/18430))
-    - Wazuh: show the installer's own error when it fails [@MickLesk](https://github.com/MickLesk) ([#18428](https://github.com/community-scripts/ProxmoxVE/pull/18428))
     - Tracearr: move to Node.js 26 [@connorgallopo](https://github.com/connorgallopo) ([#18393](https://github.com/community-scripts/ProxmoxVE/pull/18393))
 
-  - #### ✨ New Features
-
-    - Wiki.js: install 3.x [@MickLesk](https://github.com/MickLesk) ([#18382](https://github.com/community-scripts/ProxmoxVE/pull/18382))
-
-  - #### 🔧 Refactor
-
-    - OpenWrt VM: read the stable release from downloads.openwrt.org [@MickLesk](https://github.com/MickLesk) ([#18411](https://github.com/community-scripts/ProxmoxVE/pull/18411))
-    - Immich: fetch VectorChord from its new repo, skip Java, get GeoNames first [@MickLesk](https://github.com/MickLesk) ([#18397](https://github.com/community-scripts/ProxmoxVE/pull/18397))
-
 ### 💾 Core
 
-  - fix: put the reason for a VM failure into its trace [@MickLesk](https://github.com/MickLesk) ([core#200](https://github.com/community-scripts/core/pull/200))
+  - fix: pve-LXC: say when the container went away during its setup [@MickLesk](https://github.com/MickLesk) ([core#192](https://github.com/community-scripts/core/pull/192))
-- fix: check the bridge before creating a container, and its state after start [@MickLesk](https://github.com/MickLesk) ([core#199](https://github.com/community-scripts/core/pull/199))
-- ref: offer to remove only the container this run created [@MickLesk](https://github.com/MickLesk) ([core#198](https://github.com/community-scripts/core/pull/198))
-- feat: report a cancelled tool dialog as an abort and name the failing command [@MickLesk](https://github.com/MickLesk) ([core#197](https://github.com/community-scripts/core/pull/197))
-- feat: check KVM and the host's threads before building a VM [@MickLesk](https://github.com/MickLesk) ([core#196](https://github.com/community-scripts/core/pull/196))
-- ref: give a host tool one log file for the whole run [@MickLesk](https://github.com/MickLesk) ([core#194](https://github.com/community-scripts/core/pull/194))
-- fix: keep a piped stdin when output moves to the log after a hangup [@MickLesk](https://github.com/MickLesk) ([core#193](https://github.com/community-scripts/core/pull/193))
-- fix: pve-LXC: say when the container went away during its setup [@MickLesk](https://github.com/MickLesk) ([core#192](https://github.com/community-scripts/core/pull/192))
 - fix: treat Esc in a VM wizard dialog as leaving the script [@MickLesk](https://github.com/MickLesk) ([core#190](https://github.com/community-scripts/core/pull/190))
 - ref: count a container stopped during a detached install as an abort [@MickLesk](https://github.com/MickLesk) ([core#187](https://github.com/community-scripts/core/pull/187))
 - feat: find the assets of a renamed GitHub repo without the API [@MickLesk](https://github.com/MickLesk) ([core#188](https://github.com/community-scripts/core/pull/188))
 - fix: restore npm when an interrupted update left it behind [@MickLesk](https://github.com/MickLesk) ([core#189](https://github.com/community-scripts/core/pull/189))
 - feat: add var_cmode to set the container console mode [@MickLesk](https://github.com/MickLesk) ([core#180](https://github.com/community-scripts/core/pull/180))
 
-### 🧰 Tools
-
-  - #### 🐞 Bug Fixes
-
-    - all-templates: answering No or Cancel is not a failure [@MickLesk](https://github.com/MickLesk) ([#18423](https://github.com/community-scripts/ProxmoxVE/pull/18423))
-    - homebrew: skip service accounts when picking the user, survive a failed apt update [@MickLesk](https://github.com/MickLesk) ([#18424](https://github.com/community-scripts/ProxmoxVE/pull/18424))
-    - add-tailscale-lxc: start a stopped container and check its OS first [@MickLesk](https://github.com/MickLesk) ([#18421](https://github.com/community-scripts/ProxmoxVE/pull/18421))
-    - netdata: survive a failed apt update, leave quietly on Cancel [@MickLesk](https://github.com/MickLesk) ([#18427](https://github.com/community-scripts/ProxmoxVE/pull/18427))
-    - Privilege-Converter: offer only container-capable storages as the converter's restore target [@MickLesk](https://github.com/MickLesk) ([#18415](https://github.com/community-scripts/ProxmoxVE/pull/18415))
-    - let post-pve-install go on when legacy sources are kept [@MickLesk](https://github.com/MickLesk) ([#18403](https://github.com/community-scripts/ProxmoxVE/pull/18403))
-
-  - #### 🔧 Refactor
-
-    -  update-apps: say why an backup or restore failed [@MickLesk](https://github.com/MickLesk) ([#18405](https://github.com/community-scripts/ProxmoxVE/pull/18405))
-    - Keep host tools running when clear does not know the terminal [@MickLesk](https://github.com/MickLesk) ([#18412](https://github.com/community-scripts/ProxmoxVE/pull/18412))
-    - Refuse to run the PBS 4 upgrade on a Proxmox VE host [@MickLesk](https://github.com/MickLesk) ([#18416](https://github.com/community-scripts/ProxmoxVE/pull/18416))
-    - fstrim: keep trimming when pct fstrim fails on one container [@MickLesk](https://github.com/MickLesk) ([#18413](https://github.com/community-scripts/ProxmoxVE/pull/18413))
-    - execute-lxc: do not abort on a container that is not Debian or Ubuntu [@MickLesk](https://github.com/MickLesk) ([#18414](https://github.com/community-scripts/ProxmoxVE/pull/18414))
-
-### 📚 Documentation
-
-  - github: flag instead of closing on first PR template miss; add script-request eligibility check [@MickLesk](https://github.com/MickLesk) ([#18384](https://github.com/community-scripts/ProxmoxVE/pull/18384))
-
 ## 2026-11-02
 
 ### 🚀 Updated Scripts

ct/cinephage.sh

@@ -48,7 +48,7 @@ function update_script() {
     msg_ok "Built Cinephage"
 
     msg_info "Updating Camoufox"
-    $STD /opt/cinephage/node_modules/.bin/camoufox fetch
+    $STD /opt/cinephage/node_modules/.bin/camoufox-js fetch
     msg_ok "Updated Camoufox"
 
     msg_info "Starting Cinephage"

ct/discourse.sh

@@ -58,17 +58,6 @@ function update_script() {
   $STD git pull origin main
   msg_ok "Updated Discourse"
 
-  if check_for_gh_release "libvips" "libvips/libvips"; then
-    ensure_dependencies meson ninja-build pkg-config libglib2.0-dev libexpat1-dev libjpeg-dev libpng-dev libwebp-dev libtiff-dev libheif-dev libjxl-dev librsvg2-dev libcgif-dev libexif-dev liblcms2-dev liborc-0.4-dev libimagequant-dev libpango1.0-dev
-    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "libvips" "libvips/libvips" "prebuild" "latest" "/opt/libvips" "vips-*.tar.xz"
-    msg_info "Building libvips"
-    cd /opt/libvips
-    $STD meson setup build --prefix=/usr/local --libdir=lib --buildtype=release -Dmodules=disabled -Dmagick=disabled -Dexamples=false
-    $STD ninja -C build install
-    ldconfig
-    msg_ok "Built libvips"
-  fi
-
   msg_info "Updating Dependencies"
   RUBY_TARGET=$(grep -A1 '^RUBY VERSION' /opt/discourse/Gemfile.lock | grep -oE '[0-9]+\.[0-9]+\.[0-9]+' | head -n1)
   RUBY_VERSION="${RUBY_TARGET:-4.0.7}" RUBY_INSTALL_RAILS="false" setup_ruby

ct/immich.sh

@@ -149,13 +149,13 @@ EOF
     PG_VERSION=$(ls /etc/postgresql/ 2>/dev/null | sort -V | tail -1)
     PG_VERSION=${PG_VERSION:-16}
     [[ -f ~/.vchord_version ]] && mv ~/.vchord_version ~/.vectorchord
-    if check_for_gh_release "VectorChord" "supervc-stack/VectorChord" "${VCHORD_RELEASE}" "updated together with Immich after testing"; then
+    if check_for_gh_release "VectorChord" "tensorchord/VectorChord" "${VCHORD_RELEASE}" "updated together with Immich after testing"; then
       # dead tuples in smart_search/face_search make the REINDEX below fail with
       # "missing chunk ... for toast value" on VectorChord 1.0.0 (#15588); must vacuum
       # while still on the old extension version, a post-upgrade vacuum errors instead
       $STD sudo -u postgres psql -d immich -c "VACUUM (ANALYZE) smart_search;"
       $STD sudo -u postgres psql -d immich -c "VACUUM (ANALYZE) face_search;"
-      fetch_and_deploy_gh_release "VectorChord" "supervc-stack/VectorChord" "binary" "${VCHORD_RELEASE}" "/tmp" "postgresql-${PG_VERSION}-vchord_*_$(arch_resolve).deb"
+      fetch_and_deploy_gh_release "VectorChord" "tensorchord/VectorChord" "binary" "${VCHORD_RELEASE}" "/tmp" "postgresql-${PG_VERSION}-vchord_*_$(arch_resolve).deb"
       systemctl restart postgresql
       $STD sudo -u postgres psql -d immich -c "ALTER EXTENSION vector UPDATE;"
       $STD sudo -u postgres psql -d immich -c "ALTER EXTENSION vchord UPDATE;"
@@ -232,7 +232,7 @@ EOF
     # plugins
     cd "$SRC_DIR"
     export MISE_TRUSTED_CONFIG_PATHS="$SRC_DIR"/mise.toml
-    export MISE_DISABLE_TOOLS=github:jellyfin/jellyfin-ffmpeg,java,terragrunt,opentofu,npm:@openapitools/openapi-generator-cli
+    export MISE_DISABLE_TOOLS=github:jellyfin/jellyfin-ffmpeg
     export MISE_LOCKFILE_MODE=merge MISE_LOCKFILE_PLATFORMS="linux-$(arch_resolve x64 arm64)"
     mise_ok=0
     for i in 1 2 3; do

ct/technitiumdns.sh

@@ -47,7 +47,7 @@ function update_script() {
     $STD apt install -y aspnetcore-runtime-10.0
   fi
 
-  RELEASE=$(curl -fsSL https://technitium.com/dns/ | grep -oP 'Version \K[\d.]+')
+  RELEASE=$(get_latest_github_release "TechnitiumSoftware/DnsServer")
   if [[ ! -f ~/.technitium || ${RELEASE} != "$(cat ~/.technitium 2>/dev/null)" ]]; then
     fetch_and_deploy_from_url "https://download.technitium.com/dns/DnsServerPortable.tar.gz" /opt/technitium/dns
     echo "${RELEASE}" >~/.technitium

ct/wikijs.sh

@@ -30,41 +30,6 @@ function update_script() {
     exit
   fi
 
-  if [[ -d /opt/wikijs/backend ]]; then
-    NODE_VERSION="26" setup_nodejs
-
-    if check_for_gh_release "wikijs" "requarks/wiki"; then
-      PUPPETEER_INSTALLED=$([[ -d /opt/wikijs/backend/node_modules/puppeteer ]] && echo "true" || echo "false")
-
-      msg_info "Stopping Service"
-      systemctl stop wikijs
-      msg_ok "Stopped Service"
-
-      create_backup /opt/wikijs/config.yml
-      CLEAN_INSTALL=1 fetch_and_deploy_gh_release "wikijs" "requarks/wiki" "prebuild" "latest" "/opt/wikijs" "wiki-js.tar.gz"
-      restore_backup
-
-      cd /opt/wikijs/backend
-      if [[ "$(arch_resolve)" == "arm64" ]]; then
-        msg_info "Building Wiki.js Dependencies"
-        $STD npm ci --omit=dev
-        msg_ok "Built Wiki.js Dependencies"
-      fi
-      if [[ "$PUPPETEER_INSTALLED" == "true" ]]; then
-        msg_info "Reinstalling Puppeteer"
-        $STD npm install --no-save --force --include=optional --no-ignore-scripts --no-audit --no-fund "puppeteer@$(sed -n 's/^installVersion: *//p' modules/extensions/puppeteer/definition.yml)"
-        msg_ok "Reinstalled Puppeteer"
-      fi
-
-      msg_info "Starting Service"
-      systemctl start wikijs
-      msg_ok "Started Service"
-      msg_ok "Updated successfully!"
-    fi
-    exit
-  fi
-
-  msg_warn "Wiki.js 3 cannot update a 2.x install in place. Export it under Administration > Utilities > Export for Wiki.js 3.x and import it into a new Wiki.js 3 container."
   NODE_VERSION="26" NODE_MODULE="yarn,node-gyp" setup_nodejs
 
   if check_for_gh_release "wikijs" "requarks/wiki-v2"; then

ct/wireguard.sh

@@ -22,7 +22,7 @@ if [[ "${var_os:-}" == "alpine" ]]; then
   var_disk="${var_disk:-1}"
   var_version="${var_version:-3.24}"
 else
-  var_ram="${var_ram:-1024}"
+  var_ram="${var_ram:-512}"
   var_disk="${var_disk:-4}"
   var_version="${var_version:-13}"
 fi

install/cinephage-install.sh

@@ -35,7 +35,7 @@ $STD npm prune --omit=dev
 msg_ok "Built Cinephage"
 
 msg_info "Installing Camoufox"
-$STD /opt/cinephage/node_modules/.bin/camoufox fetch
+$STD /opt/cinephage/node_modules/.bin/camoufox-js fetch
 msg_ok "Installed Camoufox"
 
 msg_info "Configuring Cinephage"

install/discourse-install.sh

@@ -25,36 +25,9 @@ $STD apt install -y \
   gsfonts \
   brotli \
   nginx \
-  redis-server \
+  redis-server
-  meson \
-  ninja-build \
-  pkg-config \
-  libglib2.0-dev \
-  libexpat1-dev \
-  libjpeg-dev \
-  libpng-dev \
-  libwebp-dev \
-  libtiff-dev \
-  libheif-dev \
-  libjxl-dev \
-  librsvg2-dev \
-  libcgif-dev \
-  libexif-dev \
-  liblcms2-dev \
-  liborc-0.4-dev \
-  libimagequant-dev \
-  libpango1.0-dev
 msg_ok "Installed Dependencies"
 
-fetch_and_deploy_gh_release "libvips" "libvips/libvips" "prebuild" "latest" "/opt/libvips" "vips-*.tar.xz"
-
-msg_info "Building libvips"
-cd /opt/libvips
-$STD meson setup build --prefix=/usr/local --libdir=lib --buildtype=release -Dmodules=disabled -Dmagick=disabled -Dexamples=false
-$STD ninja -C build install
-ldconfig
-msg_ok "Built libvips"
-
 msg_info "Cloning Discourse"
 $STD git clone --depth 1 https://github.com/discourse/discourse.git /opt/discourse
 msg_ok "Cloned Discourse"

install/immich-install.sh

@@ -18,11 +18,6 @@ if is_debian && [[ "$(get_os_version_major)" -lt 13 ]]; then
   exit 238
 fi
 
-if [[ "$(arch_resolve)" == "amd64" ]] && ! grep -qm1 sse4_2 /proc/cpuinfo; then
-  msg_error "Immich needs a CPU with SSE4.2: its web build stops with 'Illegal instruction' on older ones."
-  exit 236
-fi
-
 RELEASE="v3.3.5"
 if lscpu | grep -q 'GenuineIntel'; then
   echo ""
@@ -113,7 +108,6 @@ $STD apt install --no-install-recommends -y \
   libhwy-dev \
   libwebp-dev \
   libaom-dev \
-  unzip \
   ccache
 
 setup_deb822_repo \
@@ -135,28 +129,6 @@ if [[ "$CTTYPE" == "0" && -d /dev/dri ]]; then
 fi
 msg_ok "Dependencies Installed"
 
-INSTALL_DIR="/opt/${APPLICATION}"
-UPLOAD_DIR="${INSTALL_DIR}/upload"
-SRC_DIR="${INSTALL_DIR}/source"
-APP_DIR="${INSTALL_DIR}/app"
-PLUGIN_DIR="${APP_DIR}/plugins/immich-plugin-core"
-ML_DIR="${APP_DIR}/machine-learning"
-GEO_DIR="${INSTALL_DIR}/geodata"
-mkdir -p {"${APP_DIR}","${UPLOAD_DIR}","${GEO_DIR}","${INSTALL_DIR}"/cache}
-
-msg_info "Installing GeoNames data"
-cd "$GEO_DIR"
-curl_with_retry "https://download.geonames.org/export/dump/admin1CodesASCII.txt" "admin1CodesASCII.txt"
-curl_with_retry "https://download.geonames.org/export/dump/admin2Codes.txt" "admin2Codes.txt"
-curl_with_retry "https://download.geonames.org/export/dump/countryInfo.txt" "countryInfo.txt"
-curl_with_retry "https://download.geonames.org/export/dump/cities500.zip" "cities500.zip"
-curl_with_retry "https://raw.githubusercontent.com/nvkelso/natural-earth-vector/v5.1.2/geojson/ne_10m_admin_0_countries.geojson" "ne_10m_admin_0_countries.geojson"
-unzip -q cities500.zip
-date --iso-8601=seconds | tr -d "\n" >geodata-date.txt
-rm cities500.zip
-cd ~
-msg_ok "Installed GeoNames data"
-
 MISE_ARCH="x64"
 [[ "$(arch_resolve)" == "arm64" ]] && MISE_ARCH="arm64"
 fetch_and_deploy_gh_release "mise" "jdx/mise" "singlefile" "latest" "/usr/local/bin" "mise-v*-linux-${MISE_ARCH}"
@@ -195,7 +167,7 @@ ACTUAL_PG_VERSION=$(ls /etc/postgresql/ 2>/dev/null | sort -V | tail -1)
 ACTUAL_PG_VERSION=${ACTUAL_PG_VERSION:-16}
 
 VCHORD_RELEASE="1.1.1"
-fetch_and_deploy_gh_release "VectorChord" "supervc-stack/VectorChord" "binary" "${VCHORD_RELEASE}" "/tmp" "postgresql-${ACTUAL_PG_VERSION}-vchord_*_$(arch_resolve).deb"
+fetch_and_deploy_gh_release "VectorChord" "tensorchord/VectorChord" "binary" "${VCHORD_RELEASE}" "/tmp" "postgresql-${ACTUAL_PG_VERSION}-vchord_*_$(arch_resolve).deb"
 
 sed -i "s/^#shared_preload.*/shared_preload_libraries = 'vchord.so'/" /etc/postgresql/${ACTUAL_PG_VERSION}/main/postgresql.conf
 systemctl restart postgresql.service
@@ -375,6 +347,15 @@ libvips: $LIBVIPS_REVISION
 EOF
 msg_ok "Custom Photo-processing Libraries Compiled Successfully"
 
+INSTALL_DIR="/opt/${APPLICATION}"
+UPLOAD_DIR="${INSTALL_DIR}/upload"
+SRC_DIR="${INSTALL_DIR}/source"
+APP_DIR="${INSTALL_DIR}/app"
+PLUGIN_DIR="${APP_DIR}/plugins/immich-plugin-core"
+ML_DIR="${APP_DIR}/machine-learning"
+GEO_DIR="${INSTALL_DIR}/geodata"
+mkdir -p {"${APP_DIR}","${UPLOAD_DIR}","${GEO_DIR}","${INSTALL_DIR}"/cache}
+
 fetch_and_deploy_gh_release "Immich" "immich-app/immich" "tarball" "${RELEASE}" "$SRC_DIR"
 PNPM_VERSION="$(jq -r '.packageManager | split("@")[1] | split("+")[0]' ${SRC_DIR}/package.json)"
 export COREPACK_ENABLE_DOWNLOAD_PROMPT=0
@@ -415,7 +396,7 @@ cp -a web/build "$APP_DIR"/www
 cp LICENSE "$APP_DIR"
 cd "$SRC_DIR"
 export MISE_TRUSTED_CONFIG_PATHS="$SRC_DIR"/mise.toml
-export MISE_DISABLE_TOOLS=github:jellyfin/jellyfin-ffmpeg,java,terragrunt,opentofu,npm:@openapitools/openapi-generator-cli
+export MISE_DISABLE_TOOLS=github:jellyfin/jellyfin-ffmpeg
 export MISE_LOCKFILE_MODE=merge MISE_LOCKFILE_PLATFORMS="linux-$(arch_resolve x64 arm64)"
 mise_ok=0
 for i in 1 2 3; do
@@ -500,8 +481,20 @@ grep -rlE "'/build'" | xargs -n1 sed -i "s|'/build'|'$APP_DIR'|g"
 sed -i "s@\"/cache\"@\"$INSTALL_DIR/cache\"@g" "$ML_DIR"/immich_ml/config.py
 ln -s "$UPLOAD_DIR" "$APP_DIR"/upload
 ln -s "$UPLOAD_DIR" "$ML_DIR"/upload
+
+msg_info "Installing GeoNames data"
+cd "$GEO_DIR"
+curl_with_retry "https://download.geonames.org/export/dump/admin1CodesASCII.txt" "admin1CodesASCII.txt"
+curl_with_retry "https://download.geonames.org/export/dump/admin2Codes.txt" "admin2Codes.txt"
+curl_with_retry "https://download.geonames.org/export/dump/countryInfo.txt" "countryInfo.txt"
+curl_with_retry "https://download.geonames.org/export/dump/cities500.zip" "cities500.zip"
+curl_with_retry "https://raw.githubusercontent.com/nvkelso/natural-earth-vector/v5.1.2/geojson/ne_10m_admin_0_countries.geojson" "ne_10m_admin_0_countries.geojson"
+unzip -q cities500.zip
+date --iso-8601=seconds | tr -d "\n" >geodata-date.txt
+rm cities500.zip
 cd "$INSTALL_DIR"
 ln -s "$GEO_DIR" "$APP_DIR"
+msg_ok "Installed GeoNames data"
 
 # MickLesk temporary patch for HEIC thumbnail gen
 MEDIA_REPO_JS="/opt/immich/app/dist/repositories/media.repository.js"

install/technitiumdns-install.sh

@@ -23,7 +23,7 @@ setup_deb822_repo \
 $STD apt install -y aspnetcore-runtime-10.0
 msg_ok "Installed Dependencies"
 
-RELEASE=$(curl -fsSL https://technitium.com/dns/ | grep -oP 'Version \K[\d.]+')
+RELEASE=$(get_latest_github_release "TechnitiumSoftware/DnsServer")
 fetch_and_deploy_from_url "https://download.technitium.com/dns/DnsServerPortable.tar.gz" /opt/technitium/dns
 echo "${RELEASE}" >~/.technitium
 

install/wazuh-install.sh

@@ -21,11 +21,7 @@ msg_info "Setup Wazuh"
 curl -fsSL https://packages.wazuh.com/$RELEASE/wazuh-install.sh -o wazuh-install.sh
 chmod +x wazuh-install.sh
 if [ "$STD" = "silent" ]; then
-  bash wazuh-install.sh -a >>~/wazuh-install.output || {
+  bash wazuh-install.sh -a >>~/wazuh-install.output
-    $STD tail -n 25 ~/wazuh-install.output
-    msg_error "The Wazuh installer failed, see its output above or in ~/wazuh-install.output"
-    exit 1
-  }
 else
   bash wazuh-install.sh -a | tee -a ~/wazuh-install.output
 fi

install/wikijs-install.sh

@@ -17,44 +17,26 @@ msg_info "Installing Dependencies"
 $STD apt install -y git
 msg_ok "Installed Dependencies"
 
-NODE_VERSION="26" setup_nodejs
+NODE_VERSION="26" NODE_MODULE="yarn,node-gyp" setup_nodejs
 PG_VERSION="17" setup_postgresql
-PG_DB_NAME="wiki" PG_DB_USER="wikijs_user" setup_postgresql_db
+PG_DB_NAME="wiki" PG_DB_USER="wikijs_user" PG_DB_EXTENSIONS="pg_trgm" setup_postgresql_db
-fetch_and_deploy_gh_release "wikijs" "requarks/wiki" "prebuild" "latest" "/opt/wikijs" "wiki-js.tar.gz"
+fetch_and_deploy_gh_release "wikijs" "requarks/wiki-v2" "prebuild" "latest" "/opt/wikijs" "wiki-js.tar.gz"
-
-if [[ "$(arch_resolve)" == "arm64" ]]; then
-  msg_info "Building Wiki.js Dependencies"
-  cd /opt/wikijs/backend
-  $STD npm ci --omit=dev
-  msg_ok "Built Wiki.js Dependencies"
-fi
 
 msg_info "Configuring Wiki.js"
-mkdir -p /opt/wikijs_data
+mv /opt/wikijs/config.sample.yml /opt/wikijs/config.yml
-cp /opt/wikijs/config.sample.yml /opt/wikijs/config.yml
+sed -i -E 's|^( *user: ).*|\1'"$PG_DB_USER"'|' /opt/wikijs/config.yml
-sed -i \
+sed -i -E 's|^( *pass: ).*|\1'"$PG_DB_PASS"'|' /opt/wikijs/config.yml
-  -e "s|^  user: .*|  user: wikijs_user|" \
-  -e "s|^  pass: .*|  pass: ${PG_DB_PASS}|" \
-  -e "s|^  db: .*|  db: wiki|" \
-  -e "s|^dataPath: .*|dataPath: /opt/wikijs_data|" \
-  /opt/wikijs/config.yml
-ADMIN_PASS=$(openssl rand -base64 18 | tr -dc 'a-zA-Z0-9' | cut -c1-16)
-cat <<EOF >~/wikijs.creds
-Wiki.js Admin
-Email: admin@example.com
-Password: ${ADMIN_PASS}
-EOF
 msg_ok "Configured Wiki.js"
 
 msg_info "Creating Service"
 cat <<EOF >/etc/systemd/system/wikijs.service
 [Unit]
 Description=Wiki.js
-After=network.target postgresql.service
+After=network.target
 
 [Service]
 Type=simple
-ExecStart=/usr/bin/node --no-experimental-webstorage backend
+ExecStart=/usr/bin/node server
 Restart=always
 User=root
 Environment=NODE_ENV=production
@@ -63,13 +45,7 @@ WorkingDirectory=/opt/wikijs
 [Install]
 WantedBy=multi-user.target
 EOF
-systemctl set-environment ADMIN_PASS="${ADMIN_PASS}"
 systemctl enable -q --now wikijs
-for _ in $(seq 60); do
-  curl -fs -o /dev/null http://127.0.0.1:3000 && break
-  sleep 2
-done
-systemctl unset-environment ADMIN_PASS
 msg_ok "Created Service"
 
 motd_ssh

install/zabbix-install.sh

@@ -36,17 +36,17 @@ cd /tmp
 ZABBIX_REPO_DIR="debian"
 [[ "$ZABBIX_VERSION" == "7.0" && "$(arch_resolve)" == "arm64" ]] && ZABBIX_REPO_DIR="debian-arm64"
 if [[ "$ZABBIX_VERSION" == "7.0" ]]; then
-  ZABBIX_DEB_URL="https://repo.zabbix.com/zabbix/${ZABBIX_VERSION}/${ZABBIX_REPO_DIR}/pool/main/z/zabbix-release/zabbix-release_latest_${ZABBIX_VERSION}+debian$(get_os_version_major)_all.deb"
+  ZABBIX_DEB_URL="https://repo.zabbix.com/zabbix/${ZABBIX_VERSION}/${ZABBIX_REPO_DIR}/pool/main/z/zabbix-release/zabbix-release_latest_${ZABBIX_VERSION}+debian13_all.deb"
-  ZABBIX_DEB_FILE="zabbix-release_latest_${ZABBIX_VERSION}+debian$(get_os_version_major)_all.deb"
+  ZABBIX_DEB_FILE="zabbix-release_latest_${ZABBIX_VERSION}+debian13_all.deb"
 else
-  ZABBIX_DEB_URL="https://repo.zabbix.com/zabbix/${ZABBIX_VERSION}/release/debian/pool/main/z/zabbix-release/zabbix-release_latest+debian$(get_os_version_major)_all.deb"
+  ZABBIX_DEB_URL="https://repo.zabbix.com/zabbix/${ZABBIX_VERSION}/release/debian/pool/main/z/zabbix-release/zabbix-release_latest+debian13_all.deb"
-  ZABBIX_DEB_FILE="zabbix-release_latest+debian$(get_os_version_major)_all.deb"
+  ZABBIX_DEB_FILE="zabbix-release_latest+debian13_all.deb"
 fi
 
 curl -fsSL "$ZABBIX_DEB_URL" -o /tmp/"$ZABBIX_DEB_FILE"
 $STD dpkg -i /tmp/"$ZABBIX_DEB_FILE"
 apt_update_safe
-$STD apt install -y zabbix-server-pgsql zabbix-frontend-php php-pgsql zabbix-apache-conf zabbix-sql-scripts
+$STD apt install -y zabbix-server-pgsql zabbix-frontend-php php8.4-pgsql zabbix-apache-conf zabbix-sql-scripts
 
 if [[ "$ZABBIX_VERSION" == "7.0" ]]; then
   ZABBIX_SQL="/usr/share/zabbix-sql-scripts/postgresql/server.sql.gz"

tools/addon/add-tailscale-lxc.sh

@@ -65,28 +65,6 @@ while [[ -z "${CTID}" ]]; do
     "${CTID_MENU[@]}" 3>&1 1>&2 2>&3) || exit 0
 done
 
-if [[ "$(pct status "$CTID" | awk '{print $2}')" != "running" ]]; then
-  msg_info "Starting CT $CTID"
-  pct start "$CTID"
-  for _ in {1..30}; do
-    pct exec "$CTID" -- sh -c 'ip route 2>/dev/null | grep -q "^default"' && break
-    sleep 1
-  done
-  msg_ok "Started CT $CTID"
-fi
-
-CT_OS=$(pct exec "$CTID" -- sh -c '. /etc/os-release 2>/dev/null; echo "${ID:-}"')
-case "$CT_OS" in
-debian | ubuntu) ;;
-alpine)
-  pct exec "$CTID" -- sh -c 'command -v bash >/dev/null 2>&1 || apk add --no-cache bash >/dev/null'
-  ;;
-*)
-  msg_error "CT $CTID runs ${CT_OS:-an unknown OS}. This add-on supports Debian, Ubuntu and Alpine containers."
-  exit 238
-  ;;
-esac
-
 CTID_CONFIG_PATH="/etc/pve/lxc/${CTID}.conf"
 
 # Skip if already configured

tools/addon/all-templates.sh

@@ -70,10 +70,14 @@ function cleanup_ctid() {
 header_info
 require_pve_host
 
+# Stop Proxmox VE Monitor-All if running
+if systemctl is-active -q ping-instances.service; then
+  systemctl stop ping-instances.service
+fi
 msg_info "Updating template list"
 pveam update >/dev/null 2>&1
 msg_ok "Updated template list"
-whiptail --backtitle "Proxmox VE Helper Scripts" --title "All Templates" --yesno "This will allow for the creation of one of the many Template LXC Containers. Proceed?" 10 68 || exit 0
+whiptail --backtitle "Proxmox VE Helper Scripts" --title "All Templates" --yesno "This will allow for the creation of one of the many Template LXC Containers. Proceed?" 10 68
 TEMPLATE_MENU=()
 MSG_MAX_LENGTH=0
 HOST_ARCH=$(dpkg --print-architecture)
@@ -83,7 +87,7 @@ while read -r TAG ITEM ARCH; do
   ((${#ITEM} + OFFSET > MSG_MAX_LENGTH)) && MSG_MAX_LENGTH=${#ITEM}+OFFSET
   TEMPLATE_MENU+=("$ITEM" "$TAG " "OFF")
 done < <(pveam available)
-TEMPLATE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "All Template LXCs" --radiolist "\nSelect a Template LXC to create:\n" 16 $((MSG_MAX_LENGTH + 58)) 10 "${TEMPLATE_MENU[@]}" 3>&1 1>&2 2>&3 | tr -d '"') || exit 0
+TEMPLATE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "All Template LXCs" --radiolist "\nSelect a Template LXC to create:\n" 16 $((MSG_MAX_LENGTH + 58)) 10 "${TEMPLATE_MENU[@]}" 3>&1 1>&2 2>&3 | tr -d '"')
 [ -z "$TEMPLATE" ] && {
   whiptail --backtitle "Proxmox VE Helper Scripts" --title "No Template LXC Selected" --msgbox "It appears that no Template LXC container was selected" 10 68
   echo "Done"
@@ -181,11 +185,6 @@ msg_ok "Using '$TEMPLATE_STORAGE' for template storage."
 CONTAINER_STORAGE=$(select_storage container)
 msg_ok "Using '$CONTAINER_STORAGE' for container storage."
 
-# Stop Proxmox VE Monitor-All if running
-if systemctl is-active -q ping-instances.service; then
-  systemctl stop ping-instances.service
-fi
-
 # Download template
 msg_info "Downloading LXC template (Patience)"
 pveam download "$TEMPLATE_STORAGE" "$TEMPLATE" >/dev/null || {

tools/addon/homebrew.sh

@@ -42,7 +42,7 @@ require_debian_like
 function uninstall() {
   msg_info "Uninstalling Homebrew"
 
-  BREW_USER=$(awk -F: '$3 >= 1000 && $3 < 65534 && $7 !~ /(nologin|false)$/ { print $1; exit }' /etc/passwd)
+  BREW_USER=$(awk -F: '$3 >= 1000 && $3 < 65534 { print $1; exit }' /etc/passwd)
   if [[ -n "$BREW_USER" ]]; then
     BREW_USER_HOME=$(getent passwd "$BREW_USER" | cut -d: -f6)
     for rc_file in "$BREW_USER_HOME/.bashrc" "$BREW_USER_HOME/.profile"; do
@@ -64,7 +64,7 @@ function uninstall() {
 # ==============================================================================
 function install() {
   msg_info "Detecting Non-Root User"
-  BREW_USER=$(awk -F: '$3 >= 1000 && $3 < 65534 && $7 !~ /(nologin|false)$/ { print $1; exit }' /etc/passwd)
+  BREW_USER=$(awk -F: '$3 >= 1000 && $3 < 65534 { print $1; exit }' /etc/passwd)
   if [[ -z "$BREW_USER" ]]; then
     msg_warn "No non-root user found (uid >= 1000). Homebrew cannot run as root."
     read -r -p "${TAB}Create a 'brew' user automatically? (y/N): " create_user_prompt
@@ -81,7 +81,7 @@ function install() {
   msg_ok "Detected User: $BREW_USER"
 
   msg_info "Installing Dependencies"
-  apt_update_safe
+  $STD apt update
   $STD apt install -y build-essential git file procps
   msg_ok "Installed Dependencies"
 

tools/addon/netdata.sh

@@ -80,7 +80,7 @@ install() {
   msg_ok "Set up repository"
 
   msg_info "Installing ${APP}"
-  apt_update_safe
+  $STD apt update
   $STD apt install -y netdata
   msg_ok "Installed ${APP}"
   msg_ok "Completed successfully!\n"
@@ -108,7 +108,7 @@ OPTIONS=(Install "Install ${APP} on Proxmox VE"
   Uninstall "Uninstall ${APP} from Proxmox VE")
 
 CHOICE=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "${APP}" \
-  --menu "Select an option:" 10 58 2 "${OPTIONS[@]}" 3>&1 1>&2 2>&3) || exit 0
+  --menu "Select an option:" 10 58 2 "${OPTIONS[@]}" 3>&1 1>&2 2>&3)
 
 case $CHOICE in
 "Install") install ;;

tools/pve/clean-lxcs.sh

@@ -5,7 +5,7 @@
 # https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 
 function header_info() {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
    ________                    __   _  ________
   / ____/ /__  ____ _____     / /  | |/ / ____/

tools/pve/cron-update-lxcs.sh

@@ -19,7 +19,7 @@ CONF_FILE="/etc/update-lxcs.conf"
 LOG_FILE="/var/log/update-lxcs-cron.log"
 CRON_ENTRY="0 0 * * 0 ${LOCAL_SCRIPT} >>${LOG_FILE} 2>&1"
 
-clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+clear
 cat <<"EOF"
    ______                    __  __          __      __          __   _  ________
   / ____/________  ____     / / / /___  ____/ /___ _/ /____     / /  | |/ / ____/____

tools/pve/execute.sh

@@ -6,7 +6,7 @@
 # https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 
 function header_info() {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
      ______                     __          __   _  ________
    / ____/  _____  _______  __/ /____     / /  | |/ / ____/
@@ -67,7 +67,7 @@ for container in $(pct list | awk '{if(NR>1) print $1}'); do
   else
     os=$(pct config "$container" | awk '/^ostype/ {print $2}')
     if [ "$os" != "debian" ] && [ "$os" != "ubuntu" ]; then
-      echo -e "${BL}[Info]${GN} Skipping ${RD}$container is not Debian or Ubuntu ${CL}"
+      echo -e "${BL}[Info]${GN} Skipping ${name} ${RD}$container is not Debian or Ubuntu ${CL}"
       continue
     fi
 

tools/pve/fstrim.sh

@@ -3,7 +3,7 @@
 set -eEuo pipefail
 
 function header_info() {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
     _______ __                     __                    ______     _
    / ____(_) /__  _______  _______/ /____  ____ ___     /_  __/____(_)___ ___
@@ -118,8 +118,7 @@ function trim_container() {
   fi
 
   local fstrim_output
-  # pct fstrim fails on a locked CT (e.g. a running backup); report it and go on.
+  fstrim_output=$(pct fstrim "$container" 2>&1)
-  fstrim_output=$(pct fstrim "$container" 2>&1) || true
   if echo "$fstrim_output" | grep -qi "not supported"; then
     echo -e "${RD}fstrim isnt supported on this storage!${CL}"
   elif echo "$fstrim_output" | grep -Eq '([0-9]+(\.[0-9]+)?\s*[KMGT]?B)'; then

tools/pve/guest-delete.sh

@@ -5,7 +5,7 @@
 # License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 
 function header_info {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
     ____                                          ______                __     ____       __     __
    / __ \_________  _  ______ ___  ____  _  __   / ____/_  _____  _____/ /_   / __ \___  / /__  / /____

tools/pve/hw-acceleration.sh

@@ -9,7 +9,7 @@
 
 set -e
 function header_info {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
 
    __ ___      __  ___              __             __  _

tools/pve/pbs3-upgrade.sh

@@ -6,7 +6,7 @@
 # https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 
 header_info() {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
     ____  ____ __________    __  ______  __________  ___    ____  ______
    / __ \/ __ ) ___/__  /   / / / / __ \/ ____/ __ \/   |  / __ \/ ____/
@@ -168,7 +168,7 @@ while true; do
   case $yn in
   [Yy]*) break ;;
   [Nn]*)
-    clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+    clear
     exit
     ;;
   *) echo "Please answer yes or no." ;;

tools/pve/pbs4-upgrade.sh

@@ -5,7 +5,7 @@
 # License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 
 header_info() {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
     ____  ____ _____ __ __     __  __                           __   
    / __ \/ __ ) ___// // /    / / / /___  ____ __________ _____/ /__ 
@@ -192,18 +192,13 @@ while true; do
   case $yn in
   [Yy]*) break ;;
   [Nn]*)
-    clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+    clear
     exit
     ;;
   *) echo "Please answer yes or no." ;;
   esac
 done
 
-if command -v pveversion >/dev/null 2>&1; then
-  echo -e "\n🛑  PVE Detected, Wrong Script!\n"
-  exit 232
-fi
-
 if [ "$(dpkg --print-architecture 2>/dev/null)" = "arm64" ]; then
   header_info
   msg_error "This upgrade script targets the amd64 Proxmox repositories and is not supported on ARM64."

tools/pve/post-pbs-install.sh

@@ -5,7 +5,7 @@
 # License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 
 header_info() {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
     ____  ____ _____    ____             __     ____           __        ____
    / __ \/ __ ) ___/   / __ \____  _____/ /_   /  _/___  _____/ /_____ _/ / /
@@ -89,7 +89,7 @@ main() {
     case $yn in
     [Yy]*) break ;;
     [Nn]*)
-      clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+      clear
       exit
       ;;
     *) echo "Please answer yes or no." ;;

tools/pve/post-pdm-install.sh

@@ -5,7 +5,7 @@
 # License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 
 header_info() {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
     ____  ____  __  ___   ____             __     ____           __        ____
    / __ \/ __ \/  |/  /  / __ \____  _____/ /_   /  _/___  _____/ /_____ _/ / /
@@ -412,7 +412,7 @@ while true; do
   case $yn in
   [Yy]*) break ;;
   [Nn]*)
-    clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+    clear
     exit
     ;;
   *) echo "Please answer yes or no." ;;

tools/pve/post-pmg-install.sh

@@ -5,7 +5,7 @@
 # License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 
 header_info() {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
     ____  __  _________   ____             __     ____           __        ____
    / __ \/  |/  / ____/  / __ \____  _____/ /_   /  _/___  _____/ /_____ _/ / /
@@ -410,7 +410,7 @@ while true; do
   case $yn in
   [Yy]*) break ;;
   [Nn]*)
-    clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+    clear
     exit
     ;;
   *) echo "Please answer yes or no." ;;

tools/pve/post-pve-install.sh

@@ -6,7 +6,7 @@
 # https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 
 header_info() {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
     ____ _    ________   ____             __     ____           __        ____
    / __ \ |  / / ____/  / __ \____  _____/ /_   /  _/___  _____/ /_____ _/ / /
@@ -81,7 +81,7 @@ main() {
     case $yn in
     [Yy]*) break ;;
     [Nn]*)
-      clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+      clear
       exit
       ;;
     *) echo "Please answer yes or no." ;;
@@ -226,8 +226,9 @@ start_routines_9() {
         [[ -n "$list_files" ]] && MSG+="$(echo "$list_files" | sed 's|^| - |')\n"
         MSG+="\nDo you want to disable (comment out/rename) all legacy sources and use ONLY deb822 .sources format?\n\nRecommended for Proxmox VE 9."
 
-        if whiptail --backtitle "Proxmox VE Helper Scripts" --title "Disable legacy sources?" \
+        whiptail --backtitle "Proxmox VE Helper Scripts" --title "Disable legacy sources?" \
-          --yesno "$MSG" 18 80; then
+          --yesno "$MSG" 18 80
+        if [[ $? -eq 0 ]]; then
           # Backup and disable sources.list
           if [[ -f "$listfile" ]] && grep -qE '^\s*deb ' "$listfile"; then
             cp "$listfile" "$listfile.bak"

tools/pve/pve-privilege-converter.sh

@@ -31,7 +31,7 @@ check_root() {
 
 select_target_storage_and_container_id() {
   echo -e "\nSelect target storage for restored container:\n"
-  mapfile -t target_storages < <(pvesm status --content rootdir | awk 'NR > 1 {print $1}')
+  mapfile -t target_storages < <(pvesm status --content images | awk 'NR > 1 {print $1}')
   for i in "${!target_storages[@]}"; do
     printf "%s) %s\n" "$((i + 1))" "${target_storages[$i]}"
   done

tools/pve/pve8-upgrade.sh

@@ -6,7 +6,7 @@
 # https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 
 header_info() {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
     ____ _    ____________     __  ______  __________  ___    ____  ______
    / __ \ |  / / ____( __ )   / / / / __ \/ ____/ __ \/   |  / __ \/ ____/
@@ -118,7 +118,7 @@ while true; do
   case $yn in
   [Yy]*) break ;;
   [Nn]*)
-    clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+    clear
     exit
     ;;
   *) echo "Please answer yes or no." ;;

tools/pve/scaling-governor.sh

@@ -11,7 +11,7 @@ source <(curl -fsSL "${COMMUNITY_SCRIPTS_CORE_URL:-https://raw.githubusercontent
 declare -f init_tool_telemetry &>/dev/null && init_tool_telemetry "scaling-governor" "pve"
 
 header_info() {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<EOF
   ________  __  __  _____
  / ___/ _ \/ / / / / ___/__ _  _____ _______  ___  _______
@@ -26,7 +26,7 @@ GOV_BASE="/sys/devices/system/cpu/cpu0/cpufreq"
 if [[ ! -r "$GOV_BASE/scaling_governor" || ! -r "$GOV_BASE/scaling_available_governors" ]]; then
   whiptail --backtitle "Proxmox VE Helper Scripts" --title "CPU Scaling Not Available" \
     --msgbox "CPU frequency scaling is not available on this system.\n\nThis is normal when no cpufreq driver is active (e.g. CPU power management handled by the BIOS, or certain virtualized hosts)." 12 70
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   exit 0
 fi
 
@@ -42,7 +42,7 @@ done < <(tr ' ' '\n' <"$GOV_BASE/scaling_available_governors" | sed '/^$/d' | gr
 scaling_governor=$(whiptail --backtitle "Proxmox VE Helper Scripts" --title "Current CPU Scaling Governor is set to $current_governor" --radiolist "\nSelect the Scaling Governor to use:\n" 16 $((MSG_MAX_LENGTH + 58)) 6 "${GOVERNORS_MENU[@]}" 3>&1 1>&2 2>&3 | tr -d '"')
 [ -z "$scaling_governor" ] && {
   whiptail --backtitle "Proxmox VE Helper Scripts" --title "No CPU Scaling Governor Selected" --msgbox "It appears that no CPU Scaling Governor was selected" 10 68
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   exit
 }
 echo "${scaling_governor}" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor >/dev/null

tools/pve/storage-share-helper.sh

@@ -11,7 +11,7 @@ declare -f init_tool_telemetry &>/dev/null && init_tool_telemetry "storage-share
 set -eEuo pipefail
 
 function header_info() {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
     _____ __                                 ___    _________ 
    / ___// /_____  _________ _____ ____     /   |  /  _/ __ \

tools/pve/update-apps.sh

@@ -271,22 +271,15 @@ function dry_run_container() {
   fi
 }
 
-# The line of vzdump or pct restore output that says why it failed.
-function failure_reason() {
-  local reason
-  reason=$(grep -m1 '^ERROR:' <<<"$1" | sed 's/^ERROR: //')
-  [[ -n "$reason" ]] || reason=$(grep -v '^[[:space:]]*$' <<<"$1" | tail -n1)
-  printf '%s' "$reason"
-}
-
 function backup_container() {
   msg_info "Creating backup for container $1"
-  local output
+  vzdump $1 --compress zstd --storage $STORAGE_CHOICE -notes-template "{{guestname}} - community-scripts backup updater" >/dev/null 2>&1
-  if output=$(vzdump $1 --compress zstd --storage $STORAGE_CHOICE -notes-template "{{guestname}} - community-scripts backup updater" 2>&1); then
+  status=$?
+
+  if [ $status -eq 0 ]; then
     msg_ok "Backup created"
   else
-    log_write "Container $1: vzdump failed:"$'\n'"$output"
+    msg_error "Backup failed for container $1"
-    msg_error "Backup failed for container $1: $(failure_reason "$output")"
     exit 235
   fi
 }
@@ -344,7 +337,7 @@ function log_write() {
 
 # Skip confirmation if var_skip_confirm is set to yes
 if [[ "$var_skip_confirm" != "yes" ]]; then
-  whiptail --backtitle "Proxmox VE Helper Scripts" --title "LXC App Update" --yesno "This will update apps in LXCs installed by Helper-Scripts. Proceed?" 10 58 || exit 0
+  whiptail --backtitle "Proxmox VE Helper Scripts" --title "LXC App Update" --yesno "This will update apps in LXCs installed by Helper-Scripts. Proceed?" 10 58 || exit
 fi
 
 tags_formatted="${var_tags//|/, }"
@@ -467,11 +460,12 @@ if [ "$BACKUP_CHOICE" == "yes" ]; then
   # Determine storage based on var_backup_storage
   if [[ -n "$var_backup_storage" ]]; then
     # Validate that the specified storage exists and supports backups
-    if grep -qxF -- "$var_backup_storage" <<<"$STORAGES"; then
+    if echo "$STORAGES" | grep -qw "$var_backup_storage"; then
       STORAGE_CHOICE="$var_backup_storage"
       msg_ok "Using backup storage: $STORAGE_CHOICE"
     else
-      msg_error "Specified backup storage '$var_backup_storage' not found or doesn't support backups! Available: $(echo $STORAGES)"
+      msg_error "Specified backup storage '$var_backup_storage' not found or doesn't support backups!"
+      msg_info "Available storages: $(echo $STORAGES | tr '\n' ' ')"
       exit 119
     fi
   else
@@ -648,7 +642,7 @@ for container in $CHOICE; do
     log_result "$container" "$service" "SKIPPED" "Storage critically low on /boot (>80%)"
     log_write "Container $container ($service): SKIPPED — storage critically low on /boot"
   elif [ "$BACKUP_CHOICE" == "yes" ]; then
-    msg_error "Update failed for container $container ($service, exit code: $exit_code) — attempting restore"
+    msg_error "Update failed for container $container (exit code: $exit_code) — attempting restore"
     log_write "Container $container ($service): FAILED (exit $exit_code) — attempting restore"
     msg_info "Restoring LXC $container from backup ($STORAGE_CHOICE)"
     pct stop $container
@@ -660,7 +654,7 @@ for container in $CHOICE; do
       log_write "Container $container ($service): FAILED — no backup found for restore"
       exit 235
     fi
-    restore_output=$(pct restore $container "$BACKUP_ENTRY" --storage $LXC_STORAGE --force 2>&1)
+    pct restore $container "$BACKUP_ENTRY" --storage $LXC_STORAGE --force >/dev/null 2>&1
     restorestatus=$?
     if [ $restorestatus -eq 0 ]; then
       pct start $container
@@ -668,14 +662,13 @@ for container in $CHOICE; do
       log_result "$container" "$service" "RESTORED" "Update failed (exit $exit_code) — restored from backup"
       log_write "Container $container ($service): RESTORED from $BACKUP_ENTRY"
     else
-      log_write "Container $container: pct restore failed:"$'\n'"$restore_output"
+      msg_error "Restore failed for container $container"
-      msg_error "Restore failed for container $container: $(failure_reason "$restore_output")"
       log_result "$container" "$service" "FAILED" "Update failed (exit $exit_code) — restore also failed"
       log_write "Container $container ($service): FAILED — restore also failed"
       exit 235
     fi
   else
-    msg_error "Update failed for container $container ($service, exit code: $exit_code)"
+    msg_error "Update failed for container $container (exit code: $exit_code)"
     log_result "$container" "$service" "FAILED" "Exit code $exit_code"
     log_write "Container $container ($service): FAILED (exit $exit_code)"
     if [[ "$var_continue_on_error" == "yes" ]]; then

tools/pve/update-lxcs.sh

@@ -6,7 +6,7 @@
 # https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 
 function header_info() {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
    __  __          __      __          __   _  ________
   / / / /___  ____/ /___ _/ /____     / /  | |/ / ____/

tools/pve/update-repo.sh

@@ -6,7 +6,7 @@
 # https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
 
 function header_info {
-  clear 2>/dev/null || printf '\033[H\033[2J\033[3J'
+  clear
   cat <<"EOF"
    __  __          __      __          ____                 
   / / / /___  ____/ /___ _/ /____     / __ \___  ____  ____ 

vm/almalinux-vm.sh

@@ -24,9 +24,18 @@ THIN="discard=on,ssd=1,"
 set -e
 trap 'error_handler $LINENO "$BASH_COMMAND"' ERR
 trap cleanup EXIT
-trap 'post_update_to_api "failed" "130"' SIGINT
+trap 'post_update_to_api "failed" "INTERRUPTED"' SIGINT
-trap 'post_update_to_api "failed" "143"' SIGTERM
+trap 'post_update_to_api "failed" "TERMINATED"' SIGTERM
-trap 'post_update_to_api "failed" "129"; exit 129' SIGHUP
+
+function error_handler() {
+  local exit_code="$?"
+  local line_number="$1"
+  local command="$2"
+  local error_message="${RD}[ERROR]${CL} in line ${RD}$line_number${CL}: exit code ${RD}$exit_code${CL}: while executing command ${YW}$command${CL}"
+  post_update_to_api "failed" "${command}"
+  echo -e "\n$error_message\n"
+  cleanup_vmid
+}
 
 TEMP_DIR=$(mktemp -d)
 pushd "$TEMP_DIR" >/dev/null
@@ -117,6 +126,16 @@ post_to_api_vm
 
 vm_select_storage "$HN"
 
+# ==============================================================================
+# PREREQUISITES
+# ==============================================================================
+if ! command -v virt-customize &>/dev/null; then
+  msg_info "Installing libguestfs-tools"
+  $STD apt-get update
+  $STD apt-get install -y libguestfs-tools
+  msg_ok "Installed libguestfs-tools"
+fi
+
 msg_info "Retrieving the URL for the ${APP} Qcow2 Disk Image"
 ALMA_ARCH="$(vm_arch_resolve x86_64 aarch64)"
 URL="https://repo.almalinux.org/almalinux/${var_version}/cloud/${ALMA_ARCH}/images/AlmaLinux-${var_version}-GenericCloud-latest.${ALMA_ARCH}.qcow2"

vm/fedora-vm.sh

@@ -89,6 +89,13 @@ post_to_api_vm
 
 vm_select_storage "$HN"
 
+if ! command -v virt-customize &>/dev/null; then
+  msg_info "Installing libguestfs-tools"
+  $STD apt-get update
+  $STD apt-get install -y libguestfs-tools
+  msg_ok "Installed libguestfs-tools"
+fi
+
 msg_info "Retrieving the URL for the Fedora Cloud Base image"
 MIRROR="https://dl.fedoraproject.org/pub/fedora/linux/releases"
 FEDORA_RELEASE=$(curl -fsSL "$MIRROR/" 2>/dev/null | grep -oP 'href="\K[0-9]+(?=/")' | sort -rn | head -1)

vm/openwrt-vm.sh

@@ -259,7 +259,7 @@ post_to_api_vm
 vm_select_storage "$HN"
 msg_info "Getting URL for OpenWrt Disk Image"
 
-vm_latest_from_index "https://downloads.openwrt.org/.versions.json" '"stable_version": *"\K[0-9]+\.[0-9]+\.[0-9]+' || exit 115
+vm_latest_from_index "https://openwrt.org" 'Current stable release - OpenWrt \K[0-9]+\.[0-9]+\.[0-9]+' || exit 115
 var_version="$VM_INDEX_LATEST"
 URL="https://downloads.openwrt.org/releases/$var_version/targets/x86/64/openwrt-$var_version-x86-64-generic-ext4-combined.img.gz"