arm64 unknown

Add pixelfed (ct)
2026-11-09 23:12:53 +01:00 · 2026-11-07 21:04:23 +01:00 · 2026-11-07 19:58:08 +00:00
60 changed files with 856 additions and 1089 deletions
@@ -1,187 +0,0 @@
-## 2026-11-07
-
-### 🆕 New Scripts
-
-  - EspoCRM ([#18519](https://github.com/community-scripts/ProxmoxVE/pull/18519))
-
-### 🚀 Updated Scripts
-
-  - #### 🐞 Bug Fixes
-
-    - RomM: emit player isolation headers from the serving location [@adotagarwal](https://github.com/adotagarwal) ([#18511](https://github.com/community-scripts/ProxmoxVE/pull/18511))
-
-  - #### 💥 Breaking Changes
-
-    - fix: gotenberg: update to v9 [@CrazyWolf13](https://github.com/CrazyWolf13) ([#18491](https://github.com/community-scripts/ProxmoxVE/pull/18491))
-
-### 💾 Core
-
-  - nvidia: close the hardware acceleration step when no GPU is usable | pin the whole NVIDIA userspace to the host's driver version [@MickLesk](https://github.com/MickLesk) ([core#215](https://github.com/community-scripts/core/pull/215))
- fix: stage release downloads on disk, not in /tmp [@rcourtman](https://github.com/rcourtman) ([core#218](https://github.com/community-scripts/core/pull/218))
- Minor fixes: restart php-fpm during sigpipe, Install jq for forge commands  [@MickLesk](https://github.com/MickLesk) ([core#213](https://github.com/community-scripts/core/pull/213))
- incus: name the project restriction that refuses an Incus launch [@MickLesk](https://github.com/MickLesk) ([core#214](https://github.com/community-scripts/core/pull/214))
-
-## 2026-11-06
-
-### 🚀 Updated Scripts
-
-  - #### 🐞 Bug Fixes
-
-    - UmbrelOS-VM: report runs as ProxmoxVE, not DevScripts [@MickLesk](https://github.com/MickLesk) ([#18497](https://github.com/community-scripts/ProxmoxVE/pull/18497))
-    - Caddy: skip the xCaddy test build below 2 GB RAM [@MickLesk](https://github.com/MickLesk) ([#18472](https://github.com/community-scripts/ProxmoxVE/pull/18472))
-    - Thingsboard: keep the package defaults in thingsboard.conf [@MickLesk](https://github.com/MickLesk) ([#18499](https://github.com/community-scripts/ProxmoxVE/pull/18499))
-    - Nexterm: keep the extracted app out of the /tmp cleanup [@MickLesk](https://github.com/MickLesk) ([#18501](https://github.com/community-scripts/ProxmoxVE/pull/18501))
-    - PLANKA: run the service with node instead of nodemon [@MickLesk](https://github.com/MickLesk) ([#18503](https://github.com/community-scripts/ProxmoxVE/pull/18503))
-    - MeTube/Yubal: install Deno without its shell setup [@MickLesk](https://github.com/MickLesk) ([#18406](https://github.com/community-scripts/ProxmoxVE/pull/18406))
-    - OPNsense VM: size the temp space check to the unpacked image |  say why the EFI disk could not be allocated [@MickLesk](https://github.com/MickLesk) ([#18404](https://github.com/community-scripts/ProxmoxVE/pull/18404))
-
-  - #### 🔧 Refactor
-
-    - Technitium DNS: read the version from its GitHub releases [@MickLesk](https://github.com/MickLesk) ([#18425](https://github.com/community-scripts/ProxmoxVE/pull/18425))
-
-### 💾 Core
-
-  - fix: spot same-filesystem bind mounts on Alpine [@rcourtman](https://github.com/rcourtman) ([core#212](https://github.com/community-scripts/core/pull/212))
- fix: report a container that went down during setup, keep finished installs [@MickLesk](https://github.com/MickLesk) ([core#211](https://github.com/community-scripts/core/pull/211))
-
-### 📚 Documentation
-
-  - ci: reject DevScripts URLs in scripts [@MickLesk](https://github.com/MickLesk) ([#18498](https://github.com/community-scripts/ProxmoxVE/pull/18498))
-
-## 2026-11-05
-
-### 🚀 Updated Scripts
-
-  - #### 🐞 Bug Fixes
-
-    - OpenWRT-VM: leave the NIC untagged on a bridge without a port [@MickLesk](https://github.com/MickLesk) ([#18473](https://github.com/community-scripts/ProxmoxVE/pull/18473))
-    - Podman: skip Portainer where Podman has no Quadlet [@MickLesk](https://github.com/MickLesk) ([#18469](https://github.com/community-scripts/ProxmoxVE/pull/18469))
-    - Planka: change npm start argument to --production [@CerberusStyle](https://github.com/CerberusStyle) ([#18478](https://github.com/community-scripts/ProxmoxVE/pull/18478))
-    - OPNsense VM: wait for the FreeBSD login prompt instead of 180 seconds [@MickLesk](https://github.com/MickLesk) ([#18467](https://github.com/community-scripts/ProxmoxVE/pull/18467))
-
-  - #### 🔧 Refactor
-
-    - truenas-VM: let a failed ISO lookup reach its own error [@MickLesk](https://github.com/MickLesk) ([#18476](https://github.com/community-scripts/ProxmoxVE/pull/18476))
-    - proxmox-mail-gateway: take the repo suite from the container  [@MickLesk](https://github.com/MickLesk) ([#18475](https://github.com/community-scripts/ProxmoxVE/pull/18475))
-    - Immich: Bump to 3.3.6 and minor improvement [@MickLesk](https://github.com/MickLesk) ([#18474](https://github.com/community-scripts/ProxmoxVE/pull/18474))
-    - Tududi: run 2.0 on PostgreSQL, keep SQLite installs on 1.15.0 [@MickLesk](https://github.com/MickLesk) ([#18465](https://github.com/community-scripts/ProxmoxVE/pull/18465))
-
-### 💾 Core
-
-  - fix: keep the existing install until the new archive has extracted [@rcourtman](https://github.com/rcourtman) ([core#201](https://github.com/community-scripts/core/pull/201))
- fix: keep the install when a clone or an Alpine extract fails [@rcourtman](https://github.com/rcourtman) ([core#210](https://github.com/community-scripts/core/pull/210))
-
-### 🧰 Tools
-
-  - #### 🐞 Bug Fixes
-
-    - Arcane: write both env names, stop shipping the unused .env [@MickLesk](https://github.com/MickLesk) ([#18466](https://github.com/community-scripts/ProxmoxVE/pull/18466))
-
-## 2026-11-04
-
-### 🚀 Updated Scripts
-
-  - #### 🐞 Bug Fixes
-
-    - Teleport: Poll readyz instead of fixed 10 second sleep. [@cthach](https://github.com/cthach) ([#18461](https://github.com/community-scripts/ProxmoxVE/pull/18461))
-    - n8n: install past its unsatisfiable canvas dependencies [@MickLesk](https://github.com/MickLesk) ([#18439](https://github.com/community-scripts/ProxmoxVE/pull/18439))
-    - Teable: add Redis cache [@MickLesk](https://github.com/MickLesk) ([#18450](https://github.com/community-scripts/ProxmoxVE/pull/18450))
-
-### 💾 Core
-
-  - feat: say why download_gpg_key failed [@MickLesk](https://github.com/MickLesk) ([core#208](https://github.com/community-scripts/core/pull/208))
- feat: read the MOTD's OS version at login [@MickLesk](https://github.com/MickLesk) ([core#207](https://github.com/community-scripts/core/pull/207))
- feat: skip screen clear when there is no terminal | pin only the scripts own app with var_appversion [@MickLesk](https://github.com/MickLesk) ([core#203](https://github.com/community-scripts/core/pull/203))
-
-## 2026-11-03
-
-### 🚀 Updated Scripts
-
-  - #### 🐞 Bug Fixes
-
-    - Fedora VM: let the engine install libguestfs-tools [@MickLesk](https://github.com/MickLesk) ([#18422](https://github.com/community-scripts/ProxmoxVE/pull/18422))
-    - Cinephage: run the camoufox binary the package now ships [@MickLesk](https://github.com/MickLesk) ([#18426](https://github.com/community-scripts/ProxmoxVE/pull/18426))
-    - AlmaLinux VM: report failures through the engine's error handler [@MickLesk](https://github.com/MickLesk) ([#18418](https://github.com/community-scripts/ProxmoxVE/pull/18418))
-    - WireGuard: give the Debian container 1 GB for WGDashboard [@MickLesk](https://github.com/MickLesk) ([#18419](https://github.com/community-scripts/ProxmoxVE/pull/18419))
-    - zabbix: use os specific apt packages [@MickLesk](https://github.com/MickLesk) ([#18417](https://github.com/community-scripts/ProxmoxVE/pull/18417))
-    - Discourse: build libvips 8.18 for its image worker [@MickLesk](https://github.com/MickLesk) ([#18430](https://github.com/community-scripts/ProxmoxVE/pull/18430))
-    - Wazuh: show the installer's own error when it fails [@MickLesk](https://github.com/MickLesk) ([#18428](https://github.com/community-scripts/ProxmoxVE/pull/18428))
-    - Tracearr: move to Node.js 26 [@connorgallopo](https://github.com/connorgallopo) ([#18393](https://github.com/community-scripts/ProxmoxVE/pull/18393))
-
-  - #### ✨ New Features
-
-    - Wiki.js: install 3.x [@MickLesk](https://github.com/MickLesk) ([#18382](https://github.com/community-scripts/ProxmoxVE/pull/18382))
-
-  - #### 🔧 Refactor
-
-    - OpenWrt VM: read the stable release from downloads.openwrt.org [@MickLesk](https://github.com/MickLesk) ([#18411](https://github.com/community-scripts/ProxmoxVE/pull/18411))
-    - Immich: fetch VectorChord from its new repo, skip Java, get GeoNames first [@MickLesk](https://github.com/MickLesk) ([#18397](https://github.com/community-scripts/ProxmoxVE/pull/18397))
-
-### 💾 Core
-
-  - fix: put the reason for a VM failure into its trace [@MickLesk](https://github.com/MickLesk) ([core#200](https://github.com/community-scripts/core/pull/200))
- fix: check the bridge before creating a container, and its state after start [@MickLesk](https://github.com/MickLesk) ([core#199](https://github.com/community-scripts/core/pull/199))
- ref: offer to remove only the container this run created [@MickLesk](https://github.com/MickLesk) ([core#198](https://github.com/community-scripts/core/pull/198))
- feat: report a cancelled tool dialog as an abort and name the failing command [@MickLesk](https://github.com/MickLesk) ([core#197](https://github.com/community-scripts/core/pull/197))
- feat: check KVM and the host's threads before building a VM [@MickLesk](https://github.com/MickLesk) ([core#196](https://github.com/community-scripts/core/pull/196))
- ref: give a host tool one log file for the whole run [@MickLesk](https://github.com/MickLesk) ([core#194](https://github.com/community-scripts/core/pull/194))
- fix: keep a piped stdin when output moves to the log after a hangup [@MickLesk](https://github.com/MickLesk) ([core#193](https://github.com/community-scripts/core/pull/193))
- fix: pve-LXC: say when the container went away during its setup [@MickLesk](https://github.com/MickLesk) ([core#192](https://github.com/community-scripts/core/pull/192))
- fix: treat Esc in a VM wizard dialog as leaving the script [@MickLesk](https://github.com/MickLesk) ([core#190](https://github.com/community-scripts/core/pull/190))
- ref: count a container stopped during a detached install as an abort [@MickLesk](https://github.com/MickLesk) ([core#187](https://github.com/community-scripts/core/pull/187))
- feat: find the assets of a renamed GitHub repo without the API [@MickLesk](https://github.com/MickLesk) ([core#188](https://github.com/community-scripts/core/pull/188))
- fix: restore npm when an interrupted update left it behind [@MickLesk](https://github.com/MickLesk) ([core#189](https://github.com/community-scripts/core/pull/189))
- feat: add var_cmode to set the container console mode [@MickLesk](https://github.com/MickLesk) ([core#180](https://github.com/community-scripts/core/pull/180))
-
-### 🧰 Tools
-
-  - #### 🐞 Bug Fixes
-
-    - all-templates: answering No or Cancel is not a failure [@MickLesk](https://github.com/MickLesk) ([#18423](https://github.com/community-scripts/ProxmoxVE/pull/18423))
-    - homebrew: skip service accounts when picking the user, survive a failed apt update [@MickLesk](https://github.com/MickLesk) ([#18424](https://github.com/community-scripts/ProxmoxVE/pull/18424))
-    - add-tailscale-lxc: start a stopped container and check its OS first [@MickLesk](https://github.com/MickLesk) ([#18421](https://github.com/community-scripts/ProxmoxVE/pull/18421))
-    - netdata: survive a failed apt update, leave quietly on Cancel [@MickLesk](https://github.com/MickLesk) ([#18427](https://github.com/community-scripts/ProxmoxVE/pull/18427))
-    - Privilege-Converter: offer only container-capable storages as the converter's restore target [@MickLesk](https://github.com/MickLesk) ([#18415](https://github.com/community-scripts/ProxmoxVE/pull/18415))
-    - let post-pve-install go on when legacy sources are kept [@MickLesk](https://github.com/MickLesk) ([#18403](https://github.com/community-scripts/ProxmoxVE/pull/18403))
-
-  - #### 🔧 Refactor
-
-    -  update-apps: say why an backup or restore failed [@MickLesk](https://github.com/MickLesk) ([#18405](https://github.com/community-scripts/ProxmoxVE/pull/18405))
-    - Keep host tools running when clear does not know the terminal [@MickLesk](https://github.com/MickLesk) ([#18412](https://github.com/community-scripts/ProxmoxVE/pull/18412))
-    - Refuse to run the PBS 4 upgrade on a Proxmox VE host [@MickLesk](https://github.com/MickLesk) ([#18416](https://github.com/community-scripts/ProxmoxVE/pull/18416))
-    - fstrim: keep trimming when pct fstrim fails on one container [@MickLesk](https://github.com/MickLesk) ([#18413](https://github.com/community-scripts/ProxmoxVE/pull/18413))
-    - execute-lxc: do not abort on a container that is not Debian or Ubuntu [@MickLesk](https://github.com/MickLesk) ([#18414](https://github.com/community-scripts/ProxmoxVE/pull/18414))
-
-### 📚 Documentation
-
-  - github: flag instead of closing on first PR template miss; add script-request eligibility check [@MickLesk](https://github.com/MickLesk) ([#18384](https://github.com/community-scripts/ProxmoxVE/pull/18384))
-
-## 2026-11-02
-
-### 🚀 Updated Scripts
-
-  - #### 🐞 Bug Fixes
-
-    - FileFlows: replace the program folders on update [@MickLesk](https://github.com/MickLesk) ([#18380](https://github.com/community-scripts/ProxmoxVE/pull/18380))
-    - anchor: bump Node.js from 24 to 26 [@github-actions[bot]](https://github.com/github-actions[bot]) ([#18373](https://github.com/community-scripts/ProxmoxVE/pull/18373))
-    - guardian: bump Node.js from 24 to 26 [@github-actions[bot]](https://github.com/github-actions[bot]) ([#18375](https://github.com/community-scripts/ProxmoxVE/pull/18375))
-    - nametag: bump Node.js from 20 to 24 [@github-actions[bot]](https://github.com/github-actions[bot]) ([#18376](https://github.com/community-scripts/ProxmoxVE/pull/18376))
-
-### 💾 Core
-
-  - github: trim theater, add signal to the engine bug report; move AI block to end of PR template [@MickLesk](https://github.com/MickLesk) ([core#186](https://github.com/community-scripts/core/pull/186))
- fix: do not wait forever for verbose output a daemon keeps open [@MickLesk](https://github.com/MickLesk) ([core#185](https://github.com/community-scripts/core/pull/185))
-
-## 2026-11-01
-
-### 🆕 New Scripts
-
-  - Amazon Linux ([#18369](https://github.com/community-scripts/ProxmoxVE/pull/18369))
- CachyOS VM ([#18368](https://github.com/community-scripts/ProxmoxVE/pull/18368))
- Razzia ([#18366](https://github.com/community-scripts/ProxmoxVE/pull/18366))
-
-### 🚀 Updated Scripts
-
-  - #### 🐞 Bug Fixes
-
-    - fix(zerobyte): build the bundled local agent [@nicotsx](https://github.com/nicotsx) ([#18363](https://github.com/community-scripts/ProxmoxVE/pull/18363))
@@ -125,9 +125,6 @@ Exercise vigilance regarding copycat or coat-tailing sites that seek to exploit



-
-
-



@@ -140,13 +137,6 @@ Exercise vigilance regarding copycat or coat-tailing sites that seek to exploit
 <summary><h3>2026</h3></summary>


-<details>
-<summary><h4>November (7 entries)</h4></summary>
-
-[View November 2026 Changelog](.github/changelogs/2026/11.md)
-
-</details>
-
 <details>
 <summary><h4>October (31 entries)</h4></summary>

@@ -581,88 +571,14 @@ Exercise vigilance regarding copycat or coat-tailing sites that seek to exploit

 </details>

-## 2026-11-09
-
-### 🚀 Updated Scripts
-
-  - #### 🐞 Bug Fixes
-
-    - zipline: Update RAM to 3GB [@github-actions[bot]](https://github.com/github-actions[bot]) ([#18569](https://github.com/community-scripts/ProxmoxVE/pull/18569))
-    - OpenObserve: record installed version, drop killall ExecStop [@BadFlo](https://github.com/BadFlo) ([#18566](https://github.com/community-scripts/ProxmoxVE/pull/18566))
-    - OpenObserve: extract release tarball with --no-same-owner [@BadFlo](https://github.com/BadFlo) ([#18564](https://github.com/community-scripts/ProxmoxVE/pull/18564))
-    - Immich: download before stopping, and clear maintenance mode after an interrupted update [@angusmaul](https://github.com/angusmaul) ([#18553](https://github.com/community-scripts/ProxmoxVE/pull/18553))
-    - cinephage: bump Node.js from 24 to 26 [@github-actions[bot]](https://github.com/github-actions[bot]) ([#18374](https://github.com/community-scripts/ProxmoxVE/pull/18374))
-    - kan: bump Node.js from 20 to 24 [@github-actions[bot]](https://github.com/github-actions[bot]) ([#18549](https://github.com/community-scripts/ProxmoxVE/pull/18549))
-    - myip: bump Node.js from 24 to 26 [@github-actions[bot]](https://github.com/github-actions[bot]) ([#18550](https://github.com/community-scripts/ProxmoxVE/pull/18550))
-
-  - #### 🔧 Refactor
-
-    - yuvomi: install from the attested release asset [@ulsklyc](https://github.com/ulsklyc) ([#18554](https://github.com/community-scripts/ProxmoxVE/pull/18554))
-
-### 🗑️ Deleted Scripts
-
-  - coolify: delete old ct / its an addon [@michelroegl-brunner](https://github.com/michelroegl-brunner) ([#18562](https://github.com/community-scripts/ProxmoxVE/pull/18562))
-
-### 💾 Core
-
-  - core: detect GPUs by their PCI class, not by text anywhere in the line [@MickLesk](https://github.com/MickLesk) ([core#221](https://github.com/community-scripts/core/pull/221))
- core: load an app's own settings from its .vars file [@MickLesk](https://github.com/MickLesk) ([core#216](https://github.com/community-scripts/core/pull/216))
-
-### 🧰 Tools
-
-  - #### 🐞 Bug Fixes
-
-    - IP-Tag: filter guest-agent IPs by CIDR before limiting to 3 [@mazelado](https://github.com/mazelado) ([#18537](https://github.com/community-scripts/ProxmoxVE/pull/18537))
-
-## 2026-11-08
-
-### 🆕 New Scripts
-
-  - Chatto ([#18521](https://github.com/community-scripts/ProxmoxVE/pull/18521))
- Firefox-Syncserver ([#18520](https://github.com/community-scripts/ProxmoxVE/pull/18520))
-
-### 🚀 Updated Scripts
-
-  - #### 🔧 Refactor
-
-    - Immich: do not clone libjxl's testdata [@MickLesk](https://github.com/MickLesk) ([#18539](https://github.com/community-scripts/ProxmoxVE/pull/18539))
-    - Databasus: build 3.65 and ship the verification agent [@MickLesk](https://github.com/MickLesk) ([#18500](https://github.com/community-scripts/ProxmoxVE/pull/18500))
-
-### 💾 Core
-
-  - fix: a closed console no longer ends a running setup | ERR trap fixes | check VM ID before creating [@MickLesk](https://github.com/MickLesk) ([core#219](https://github.com/community-scripts/core/pull/219))
-
-### 🧰 Tools
-
-  - #### 🐞 Bug Fixes
-
-    - update-apps: keep the backup alive on a closed console, stop before restoring [@MickLesk](https://github.com/MickLesk) ([#18540](https://github.com/community-scripts/ProxmoxVE/pull/18540))
-    - clean-lxcs: run with sh and keep going when one container fails [@MickLesk](https://github.com/MickLesk) ([#18538](https://github.com/community-scripts/ProxmoxVE/pull/18538))
-    - update-lxcs: keep going when one container fails [@MickLesk](https://github.com/MickLesk) ([#18541](https://github.com/community-scripts/ProxmoxVE/pull/18541))
-
 ## 2026-11-07

-### 🆕 New Scripts
-
-  - EspoCRM ([#18519](https://github.com/community-scripts/ProxmoxVE/pull/18519))
-
 ### 🚀 Updated Scripts

-  - #### 🐞 Bug Fixes
-
-    - RomM: emit player isolation headers from the serving location [@adotagarwal](https://github.com/adotagarwal) ([#18511](https://github.com/community-scripts/ProxmoxVE/pull/18511))
-
  - #### 💥 Breaking Changes

    - fix: gotenberg: update to v9 [@CrazyWolf13](https://github.com/CrazyWolf13) ([#18491](https://github.com/community-scripts/ProxmoxVE/pull/18491))

-### 💾 Core
-
-  - nvidia: close the hardware acceleration step when no GPU is usable | pin the whole NVIDIA userspace to the host's driver version [@MickLesk](https://github.com/MickLesk) ([core#215](https://github.com/community-scripts/core/pull/215))
- fix: stage release downloads on disk, not in /tmp [@rcourtman](https://github.com/rcourtman) ([core#218](https://github.com/community-scripts/core/pull/218))
- Minor fixes: restart php-fpm during sigpipe, Install jq for forge commands  [@MickLesk](https://github.com/MickLesk) ([core#213](https://github.com/community-scripts/core/pull/213))
- incus: name the project restriction that refuses an Incus launch [@MickLesk](https://github.com/MickLesk) ([core#214](https://github.com/community-scripts/core/pull/214))
-
 ## 2026-11-06

 ### 🚀 Updated Scripts
@@ -1411,4 +1327,189 @@ Exercise vigilance regarding copycat or coat-tailing sites that seek to exploit

  - #### ✨ New Features

-    - FileBrowser Quantum: migrate the config and database to v2 [@MickLesk](https://github.com/MickLesk) ([#17815](https://github.com/community-scripts/ProxmoxVE/pull/17815))
+    - FileBrowser Quantum: migrate the config and database to v2 [@MickLesk](https://github.com/MickLesk) ([#17815](https://github.com/community-scripts/ProxmoxVE/pull/17815))
+
+## 2026-10-08
+
+### 🆕 New Scripts
+
+  - Unifi-OS-Server VM ([#17752](https://github.com/community-scripts/ProxmoxVE/pull/17752))
+- ZimaOS VM ([#17778](https://github.com/community-scripts/ProxmoxVE/pull/17778))
+
+### 🚀 Updated Scripts
+
+  - Revert "Immich: Pin to v3.3.0" [@MickLesk](https://github.com/MickLesk) ([#17767](https://github.com/community-scripts/ProxmoxVE/pull/17767))
+
+  - #### 🐞 Bug Fixes
+
+    - Homarr: replace the musl better-sqlite3 that v2.3.0 ships for Debian [@MickLesk](https://github.com/MickLesk) ([#17789](https://github.com/community-scripts/ProxmoxVE/pull/17789))
+    - CLIProxyAPI: keep plugins and data across updates [@MickLesk](https://github.com/MickLesk) ([#17790](https://github.com/community-scripts/ProxmoxVE/pull/17790))
+    - Kima-Hub: install the Python services into a uv venv [@MickLesk](https://github.com/MickLesk) ([#17791](https://github.com/community-scripts/ProxmoxVE/pull/17791))
+
+  - #### ✨ New Features
+
+    - Immich: Pin to 3.3.0 / Update ML Python to 3.13 [@MickLesk](https://github.com/MickLesk) ([#17770](https://github.com/community-scripts/ProxmoxVE/pull/17770))
+
+  - #### 🔧 Refactor
+
+    - Refactor: OPNsense VM [@MickLesk](https://github.com/MickLesk) ([#17785](https://github.com/community-scripts/ProxmoxVE/pull/17785))
+    - Refactor: Nextcloud VM (Turnkey) [@MickLesk](https://github.com/MickLesk) ([#17787](https://github.com/community-scripts/ProxmoxVE/pull/17787))
+    - Refactor: OpenWrt VM [@MickLesk](https://github.com/MickLesk) ([#17774](https://github.com/community-scripts/ProxmoxVE/pull/17774))
+    - Refactor: Ubuntu VM [@MickLesk](https://github.com/MickLesk) ([#17776](https://github.com/community-scripts/ProxmoxVE/pull/17776))
+
+### 💾 Core
+
+  - Tolerate a missing datacenter.cfg in vm_keyboard_default [@MickLesk](https://github.com/MickLesk) ([core#124](https://github.com/community-scripts/core/pull/124))
+- Take the ISO storage from the disk pool when it can hold ISOs [@MickLesk](https://github.com/MickLesk) ([core#122](https://github.com/community-scripts/core/pull/122))
+- Shared VM helpers: disk import, releases, checksums, first boot, IP by MAC [@MickLesk](https://github.com/MickLesk) ([core#117](https://github.com/community-scripts/core/pull/117))
+- tools: forge truncated release list [@MickLesk](https://github.com/MickLesk) ([core#118](https://github.com/community-scripts/core/pull/118))
+- Remember a kept cached image until the upstream changes [@MickLesk](https://github.com/MickLesk) ([core#119](https://github.com/community-scripts/core/pull/119))
+- Choose the VM keyboard layout and carry the host's timezone into prepared images [@MickLesk](https://github.com/MickLesk) ([core#120](https://github.com/community-scripts/core/pull/120))
+- VM's: run first-boot units without debconf dialogs [@MickLesk](https://github.com/MickLesk) ([core#121](https://github.com/community-scripts/core/pull/121))
+
+## 2026-10-07
+
+### 🆕 New Scripts
+
+  - Fedora VM ([#17747](https://github.com/community-scripts/ProxmoxVE/pull/17747))
+
+### 🚀 Updated Scripts
+
+  - #### 🐞 Bug Fixes
+
+    - AudioMuse-AI: replace the venv on update without asking [@MickLesk](https://github.com/MickLesk) ([#17738](https://github.com/community-scripts/ProxmoxVE/pull/17738))
+    - paperclip: run as a dedicated non-root user so Claude Code can skip permissions [@samvandenbossche](https://github.com/samvandenbossche) ([#17707](https://github.com/community-scripts/ProxmoxVE/pull/17707))
+    - Thingsboard: update Java version from 17 to 25 [@CerberusStyle](https://github.com/CerberusStyle) ([#17733](https://github.com/community-scripts/ProxmoxVE/pull/17733))
+
+  - #### ✨ New Features
+
+    - Immich: Pin to v3.3.0 [@vhsdream](https://github.com/vhsdream) ([#17759](https://github.com/community-scripts/ProxmoxVE/pull/17759))
+
+  - #### 💥 Breaking Changes
+
+    - OpenCloud: bump to v8.1.0, rebuild search index on upgrade [@SimKaiLong](https://github.com/SimKaiLong) ([#17710](https://github.com/community-scripts/ProxmoxVE/pull/17710))
+
+  - #### 🔧 Refactor
+
+    - Pangolin: Unpin Release, stable enough, Bump to latest [@MickLesk](https://github.com/MickLesk) ([#17740](https://github.com/community-scripts/ProxmoxVE/pull/17740))
+    - Refactor: Archlinux-VM [@MickLesk](https://github.com/MickLesk) ([#17741](https://github.com/community-scripts/ProxmoxVE/pull/17741))
+    - Refactor: MikroTik RouterOS [@MickLesk](https://github.com/MickLesk) ([#17748](https://github.com/community-scripts/ProxmoxVE/pull/17748))
+
+### 💾 Core
+
+  - Fix Fedora and BLS cloud image console setup [@MickLesk](https://github.com/MickLesk) ([core#116](https://github.com/community-scripts/core/pull/116))
+- Keep setup_nodejs alive when the caller's directory is gone [@MickLesk](https://github.com/MickLesk) ([core#114](https://github.com/community-scripts/core/pull/114))
+
+## 2026-10-06
+
+### 🆕 New Scripts
+
+  - Pricebuddy ([#17708](https://github.com/community-scripts/ProxmoxVE/pull/17708))
+
+### 🚀 Updated Scripts
+
+  - #### 🐞 Bug Fixes
+
+    - Webtrees: stop serving data/ and the source folders directly [@MickLesk](https://github.com/MickLesk) ([#17724](https://github.com/community-scripts/ProxmoxVE/pull/17724))
+
+### 💾 Core
+
+  - Incus: check the architecture on Incus hosts too [@MickLesk](https://github.com/MickLesk) ([core#113](https://github.com/community-scripts/core/pull/113))
+- Incus: Pass the app's var_* settings into Incus containers  [@MickLesk](https://github.com/MickLesk) ([core#112](https://github.com/community-scripts/core/pull/112))
+- Incus: stub storage_content_check on Incus [@MickLesk](https://github.com/MickLesk) ([core#104](https://github.com/community-scripts/core/pull/104))
+- Incus: map Proxmox template versions to Incus image names [@MickLesk](https://github.com/MickLesk) ([core#111](https://github.com/community-scripts/core/pull/111))
+- Incus: read storage names from .vars files  [@MickLesk](https://github.com/MickLesk) ([core#110](https://github.com/community-scripts/core/pull/110))
+- Incus: show the spinner inside containers again [@MickLesk](https://github.com/MickLesk) ([core#109](https://github.com/community-scripts/core/pull/109))
+- Incus: set the hostname with sh, so it works before bash is installed [@MickLesk](https://github.com/MickLesk) ([core#102](https://github.com/community-scripts/core/pull/102))
+- Incus: reserve a plain address on Incus, leave the gateway to the network [@MickLesk](https://github.com/MickLesk) ([core#101](https://github.com/community-scripts/core/pull/101))
+- Incus: Wait for the network on Alpine OS too [@MickLesk](https://github.com/MickLesk) ([core#105](https://github.com/community-scripts/core/pull/105))
+- Incus: do not fail the build when hostname -I is missing [@MickLesk](https://github.com/MickLesk) ([core#103](https://github.com/community-scripts/core/pull/103))
+- Incus: Fuse always in unprivileged Containers, attach TUN only when container lacks it [@MickLesk](https://github.com/MickLesk) ([core#108](https://github.com/community-scripts/core/pull/108))
+- Incus: accept mode=generated [@MickLesk](https://github.com/MickLesk) ([core#106](https://github.com/community-scripts/core/pull/106))
+- Incus: pass the full install environment into Incus containers (quoted) [@MickLesk](https://github.com/MickLesk) ([core#107](https://github.com/community-scripts/core/pull/107))
+
+## 2026-10-05
+
+### 🚀 Updated Scripts
+
+  - Point to DevScripts, the renamed ProxmoxVED [@MickLesk](https://github.com/MickLesk) ([#17694](https://github.com/community-scripts/ProxmoxVE/pull/17694))
+
+  - #### 🐞 Bug Fixes
+
+    - wanderer: set the proxy secret and install plugins in their own directories [@MickLesk](https://github.com/MickLesk) ([#17698](https://github.com/community-scripts/ProxmoxVE/pull/17698))
+    - discourse: serve stylesheets and repair the update [@MickLesk](https://github.com/MickLesk) ([#17697](https://github.com/community-scripts/ProxmoxVE/pull/17697))
+    - wikijs: bump Node.js from 24 to 26 [@github-actions[bot]](https://github.com/github-actions[bot]) ([#17689](https://github.com/community-scripts/ProxmoxVE/pull/17689))
+    - jotty: bump Node.js from 22 to 24 [@github-actions[bot]](https://github.com/github-actions[bot]) ([#17688](https://github.com/community-scripts/ProxmoxVE/pull/17688))
+
+### 💾 Core
+
+  - Read releases from github.com when the API is rate limited, resume stalled downloads [@MickLesk](https://github.com/MickLesk) ([core#99](https://github.com/community-scripts/core/pull/99))
+- Check for template and container storage before the settings menu [@MickLesk](https://github.com/MickLesk) ([core#98](https://github.com/community-scripts/core/pull/98))
+- Check /etc/pve before the settings menu [@MickLesk](https://github.com/MickLesk) ([core#97](https://github.com/community-scripts/core/pull/97))
+- Check container settings before pct create rejects them [@MickLesk](https://github.com/MickLesk) ([core#96](https://github.com/community-scripts/core/pull/96))
+- PVE: Smart Diagnosis - say why a container would not start [@MickLesk](https://github.com/MickLesk) ([core#95](https://github.com/community-scripts/core/pull/95))
+- Retry template downloads that pveam reports as done but are not [@MickLesk](https://github.com/MickLesk) ([core#94](https://github.com/community-scripts/core/pull/94))
+- Check the OS release against pve-container before creating anything [@MickLesk](https://github.com/MickLesk) ([core#93](https://github.com/community-scripts/core/pull/93))
+- Rename "ProxmoxVED"-Links to "DevScripts" [@MickLesk](https://github.com/MickLesk) ([core#91](https://github.com/community-scripts/core/pull/91))
+
+### 🧰 Tools
+
+  - #### 🐞 Bug Fixes
+
+    - monitor-all: read container IPs from the host side [@jasonobrien](https://github.com/jasonobrien) ([#17686](https://github.com/community-scripts/ProxmoxVE/pull/17686))
+
+## 2026-10-04
+
+### 🚀 Updated Scripts
+
+  - #### 🐞 Bug Fixes
+
+    - immich: read the Intel runtime from the pinned release [@MickLesk](https://github.com/MickLesk) ([#17677](https://github.com/community-scripts/ProxmoxVE/pull/17677))
+
+### 💾 Core
+
+  - better explain unsupported version & upgrade path for pve [@MickLesk](https://github.com/MickLesk) ([core#86](https://github.com/community-scripts/core/pull/86))
+- Quote PostgreSQL identifiers and drop spaces from the creds file name [@MickLesk](https://github.com/MickLesk) ([core#89](https://github.com/community-scripts/core/pull/89))
+- Find the default Rust toolchain in current rustup output [@MickLesk](https://github.com/MickLesk) ([core#88](https://github.com/community-scripts/core/pull/88))
+
+## 2026-10-03
+
+### 🆕 New Scripts
+
+  - Keeper.sh ([#17659](https://github.com/community-scripts/ProxmoxVE/pull/17659))
+
+### 🚀 Updated Scripts
+
+  - #### 🐞 Bug Fixes
+
+    - hermesagent: download the installer before running it [@MickLesk](https://github.com/MickLesk) ([#17666](https://github.com/community-scripts/ProxmoxVE/pull/17666))
+    - frigate: raise the Node heap for the web build [@MickLesk](https://github.com/MickLesk) ([#17667](https://github.com/community-scripts/ProxmoxVE/pull/17667))
+    - Tracearr: workaround for failing map tiles download and data preservation [@durzo](https://github.com/durzo) ([#17661](https://github.com/community-scripts/ProxmoxVE/pull/17661))
+    - fix(nginxproxymanager): clean yarn cache after builds to prevent disk growth [@PsycoStea](https://github.com/PsycoStea) ([#17653](https://github.com/community-scripts/ProxmoxVE/pull/17653))
+
+  - #### 🔧 Refactor
+
+    - Several Scripts: refactor msg_ blocks, generate passwords with helper, add CLEAN_INSTALL_KEEP  [@MickLesk](https://github.com/MickLesk) ([#17655](https://github.com/community-scripts/ProxmoxVE/pull/17655))
+
+### 💾 Core
+
+  - detect_repo_source: read the license header and fall back to ProxmoxVE [@MickLesk](https://github.com/MickLesk) ([core#85](https://github.com/community-scripts/core/pull/85))
+
+## 2026-10-02
+
+### 🚀 Updated Scripts
+
+  - #### 🐞 Bug Fixes
+
+    - zerobyte: upgrade Bun on update [@MickLesk](https://github.com/MickLesk) ([#17646](https://github.com/community-scripts/ProxmoxVE/pull/17646))
+    - sure: keep Active Storage uploads across updates [@MickLesk](https://github.com/MickLesk) ([#17648](https://github.com/community-scripts/ProxmoxVE/pull/17648))
+    - twenty: run upstreams upgrade command instead of the removed setup-db.ts [@MickLesk](https://github.com/MickLesk) ([#17647](https://github.com/community-scripts/ProxmoxVE/pull/17647))
+
+  - #### 🔧 Refactor
+
+    - NPM: Refactor / Fix npm openresty user and certbot version [@MickLesk](https://github.com/MickLesk) ([#17649](https://github.com/community-scripts/ProxmoxVE/pull/17649))
+    - several scripts: use the release helpers instead of hand-rolled version checks and downloads [@MickLesk](https://github.com/MickLesk) ([#17625](https://github.com/community-scripts/ProxmoxVE/pull/17625))
+
+### 💾 Core
+
+  - QoL: message blocks, clean-install keep list, password helper, network limits [@MickLesk](https://github.com/MickLesk) ([core#61](https://github.com/community-scripts/core/pull/61))
@@ -1,57 +0,0 @@
-#!/usr/bin/env bash
-_cs_boot="${COMMUNITY_SCRIPTS_CORE_DIR:-$(dirname "${BASH_SOURCE[0]}")/../../core}/core/build.func"
-source "$_cs_boot" 2>/dev/null || source <(curl -fsSL "${COMMUNITY_SCRIPTS_CORE_URL:-https://raw.githubusercontent.com/community-scripts/core/main}/core/build.func")
-# Copyright (c) 2021-2026 community-scripts ORG
-# Author: MickLesk (CanbiZ)
-# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
-# Source: https://github.com/chattocorp/chatto
-
-APP="Chatto"
-var_tags="${var_tags:-chat;messaging}"
-var_cpu="${var_cpu:-2}"
-var_ram="${var_ram:-2048}"
-var_disk="${var_disk:-8}"
-var_os="${var_os:-debian}"
-var_version="${var_version:-13}"
-var_arm64="${var_arm64:-yes}"
-var_unprivileged="${var_unprivileged:-1}"
-
-header_info "$APP"
-variables
-color
-catch_errors
-
-function update_script() {
-  header_info
-  check_container_storage
-  check_container_resources
-
-  if [[ ! -d /opt/chatto ]]; then
-    msg_error "No ${APP} Installation Found!"
-    exit
-  fi
-
-  if check_for_gh_release "chatto" "chattocorp/chatto"; then
-    msg_info "Stopping Service"
-    systemctl stop chatto
-    msg_ok "Stopped Service"
-
-    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "chatto" "chattocorp/chatto" "prebuild" "latest" "/opt/chatto" "chatto_Linux_$(arch_resolve x86_64 arm64).tar.gz"
-    chmod +x /opt/chatto/chatto
-
-    msg_info "Starting Service"
-    systemctl start chatto
-    msg_ok "Started Service"
-    msg_ok "Updated successfully!"
-  fi
-  exit
-}
-
-start
-build_container
-description
-
-msg_ok "Completed Successfully!\n"
-echo -e "${CREATING}${GN}${APP} setup has been successfully initialized!${CL}"
-echo -e "${INFO}${YW}Access it using the following URL:${CL}"
-echo -e "${TAB}${GATEWAY}${BGN}http://${IP}:4000${CL}"
@@ -36,7 +36,7 @@ function update_script() {
    systemctl stop cinephage
    msg_ok "Stopped Cinephage"

-    NODE_VERSION="26" setup_nodejs
+    NODE_VERSION="24" setup_nodejs
    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "cinephage" "MoldyTaint/Cinephage" "tarball"

    msg_info "Building Cinephage"
@@ -0,0 +1,73 @@
+#!/usr/bin/env bash
+_cs_boot="${COMMUNITY_SCRIPTS_CORE_DIR:-$(dirname "${BASH_SOURCE[0]}")/../../core}/core/build.func"
+source "$_cs_boot" 2>/dev/null || source <(curl -fsSL "${COMMUNITY_SCRIPTS_CORE_URL:-https://raw.githubusercontent.com/community-scripts/core/main}/core/build.func")
+# Copyright (c) 2021-2026 community-scripts ORG
+# Author: MickLesk (CanbiZ)
+# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
+# Source: https://coolify.io/
+
+APP="Coolify"
+var_tags="${var_tags:-docker;paas}"
+var_cpu="${var_cpu:-2}"
+var_ram="${var_ram:-4096}"
+var_disk="${var_disk:-30}"
+var_os="${var_os:-debian}"
+var_version="${var_version:-13}"
+var_arm64="${var_arm64:-yes}"
+var_unprivileged="${var_unprivileged:-1}"
+
+header_info "$APP"
+variables
+color
+catch_errors
+
+ADDON_SCRIPT="https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/tools/addon/coolify.sh"
+
+function update_script() {
+  header_info
+  check_container_storage
+  check_container_resources
+
+  if [[ ! -d /data/coolify ]]; then
+    msg_error "No ${APP} Installation Found!"
+    exit
+  fi
+
+  msg_warn "⚠️  ${APP} has been migrated to an addon script."
+  echo ""
+  echo -e "${INFO}${YW}This is a one-time migration. After this, you can update ${APP} anytime with:${CL}"
+  echo -e "${TAB}${TAB}${GN}update_coolify${CL}  or  ${GN}bash <(curl -fsSL ${ADDON_SCRIPT})${CL}"
+  echo ""
+  read -r -p "${TAB}Migrate update function now? [y/N]: " CONFIRM
+  if [[ ! "${CONFIRM,,}" =~ ^(y|yes)$ ]]; then
+    msg_warn "Migration skipped. The old update will continue to work for now."
+    msg_info "Updating ${APP} (legacy)"
+    $STD bash <(curl -fsSL https://cdn.coollabs.io/coolify/install.sh)
+    msg_ok "Updated ${APP}"
+    exit
+  fi
+
+  msg_info "Migrating update function"
+  TMP_UPDATE=$(mktemp)
+  cat <<'MIGRATION_EOF' >"$TMP_UPDATE"
+bash -c "$(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/tools/addon/coolify.sh)"
+MIGRATION_EOF
+  mv "$TMP_UPDATE" /usr/bin/update
+  chmod +x /usr/bin/update
+
+  ln -sf /usr/bin/update /usr/bin/update_coolify 2>/dev/null || true
+  msg_ok "Migration complete"
+
+  echo -e "${INFO}${YW}Running addon update${CL}"
+  type=update bash <(curl -fsSL "${ADDON_SCRIPT}")
+  exit
+}
+
+start
+build_container
+description
+
+msg_ok "Completed successfully!\n"
+echo -e "${CREATING}${GN}${APP} setup has been successfully initialized!${CL}"
+echo -e "${INFO}${YW}Access it using the following URL:${CL}"
+echo -e "${GATEWAY}${BGN}http://${IP}:8000${CL}"
@@ -26,7 +26,7 @@ function update_script() {
  check_container_storage
  check_container_resources

-  NODE_VERSION="26" setup_nodejs
+  NODE_VERSION="24" setup_nodejs
  ensure_dependencies build-essential

  if command -v cross-seed &>/dev/null; then
@@ -38,29 +38,57 @@ function update_script() {
    $STD systemctl stop databasus
    msg_ok "Stopped Databasus"

-    ensure_dependencies libedit2 libgssapi-krb5-2 libncurses6 libreadline8t64
+    create_backup /opt/databasus/.env
+
+    msg_info "Ensuring Database Clients"
+    # Create PostgreSQL version symlinks for compatibility
+    for v in 12 13 14 15 16 18; do
+      ln -sf /usr/lib/postgresql/17 /usr/lib/postgresql/$v
+    done
+    # Install MongoDB Database Tools via direct .deb (no APT repo for Debian 13)
+    if ! command -v mongodump &>/dev/null; then
+      [[ "$(get_os_info id)" == "ubuntu" ]] && MONGO_DIST="ubuntu2204" || MONGO_DIST="debian12"
+      MONGO_ARCH=$(arch_resolve "x86_64" "arm64")
+      # MongoDB only publishes arm64 builds for Ubuntu
+      [[ "$MONGO_ARCH" == "arm64" ]] && MONGO_DIST="ubuntu2204"
+      fetch_and_deploy_from_url "https://fastdl.mongodb.org/tools/db/mongodb-database-tools-${MONGO_DIST}-${MONGO_ARCH}-100.16.1.deb"
+    fi
+    ensure_dependencies mariadb-client
+    mkdir -p /usr/local/mariadb-{10.6,12.1}/bin /usr/local/mysql-{5.7,8.0,8.4,9}/bin /usr/local/mongodb-database-tools/bin
+    [[ -f /usr/bin/mongodump ]] && ln -sf /usr/bin/mongodump /usr/local/mongodb-database-tools/bin/mongodump
+    [[ -f /usr/bin/mongorestore ]] && ln -sf /usr/bin/mongorestore /usr/local/mongodb-database-tools/bin/mongorestore
+    # Create MariaDB and MySQL client symlinks for compatibility
+    for dir in /usr/local/mariadb-{10.6,12.1}/bin; do
+      ln -sf /usr/bin/mariadb-dump "$dir/mariadb-dump"
+      ln -sf /usr/bin/mariadb "$dir/mariadb"
+    done
+    for dir in /usr/local/mysql-{5.7,8.0,8.4,9}/bin; do
+      ln -sf /usr/bin/mariadb-dump "$dir/mysqldump"
+      ln -sf /usr/bin/mariadb "$dir/mysql"
+    done
+    msg_ok "Ensured Database Clients"
+
    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "databasus" "databasus/databasus" "tarball" "latest" "/opt/databasus"
    GO_VERSION="$(grep -m1 '^go ' /opt/databasus/backend/go.mod | awk '{print $2}')" setup_go

    msg_info "Updating Databasus"
-    RELEASE=$(cat ~/.databasus)
    export COREPACK_ENABLE_DOWNLOAD_PROMPT=0
    cd /opt/databasus/frontend
+
    $STD corepack prepare pnpm@latest --activate
    $STD pnpm install --frozen-lockfile
-    $STD env VITE_APP_VERSION="${RELEASE}" pnpm run build
+    $STD pnpm run build
    cd /opt/databasus/backend
-    $STD env CGO_ENABLED=0 GOOS=linux GOARCH="$(arch_resolve)" go build -o /opt/databasus/databasus ./cmd/databasus
-    mkdir -p /opt/databasus/agent-binaries
-    for arch in amd64 arm64; do
-      $STD env CGO_ENABLED=0 GOOS=linux GOARCH=$arch go build -ldflags "-X main.Version=${RELEASE}" -o /opt/databasus/agent-binaries/databasus-verification-agent-linux-$arch ./cmd/verification-agent
-    done
+    $STD go mod download
+    $STD /root/go/bin/swag init -g cmd/main.go -o swagger
+    $STD env CGO_ENABLED=0 GOOS=linux GOARCH=$(arch_resolve) go build -o databasus ./cmd
+    mv /opt/databasus/backend/databasus /opt/databasus/databasus
    mkdir -p /opt/databasus/ui/build
    cp -r /opt/databasus/frontend/dist/* /opt/databasus/ui/build/
-    sed -i '/^APP_VERSION=/d' /.env
-    echo "APP_VERSION=${RELEASE}" >>/.env
+    cp -r /opt/databasus/backend/migrations /opt/databasus/
    msg_ok "Updated Databasus"

+    restore_backup
    chown -R postgres:postgres /opt/databasus

    if ! grep -q "EnvironmentFile=/.env" /etc/systemd/system/databasus.service; then
@@ -1,74 +0,0 @@
-#!/usr/bin/env bash
-_cs_boot="${COMMUNITY_SCRIPTS_CORE_DIR:-$(dirname "${BASH_SOURCE[0]}")/../../core}/core/build.func"
-source "$_cs_boot" 2>/dev/null || source <(curl -fsSL "${COMMUNITY_SCRIPTS_CORE_URL:-https://raw.githubusercontent.com/community-scripts/core/main}/core/build.func")
-
-# Copyright (c) 2021-2026 community-scripts ORG
-# Author: Masked-Kunsiquat
-# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
-# Source: https://www.espocrm.com/ | Github: https://github.com/espocrm/espocrm
-
-APP="EspoCRM"
-var_tags="${var_tags:-crm;business}"
-var_cpu="${var_cpu:-2}"
-var_ram="${var_ram:-2048}"
-var_disk="${var_disk:-8}"
-var_os="${var_os:-debian}"
-var_version="${var_version:-13}"
-var_arm64="${var_arm64:-yes}"
-var_unprivileged="${var_unprivileged:-1}"
-
-export var_admin_user="${var_admin_user:-}"
-export var_admin_pass="${var_admin_pass:-}"
-
-header_info "$APP"
-variables
-color
-catch_errors
-
-function update_script() {
-  header_info
-  check_container_storage
-  check_container_resources
-
-  if [[ ! -d /opt/espocrm ]]; then
-    msg_error "No ${APP} Installation Found!"
-    exit
-  fi
-
-  if check_for_gh_release "espo-crm" "espocrm/espocrm"; then
-    msg_info "Stopping Services"
-    systemctl stop nginx cron php8.4-fpm
-    msg_ok "Stopped Services"
-
-    CLEAN_INSTALL=1 CLEAN_INSTALL_KEEP="data custom client/custom" fetch_and_deploy_gh_release "espo-crm" "espocrm/espocrm" "prebuild" "latest" "/opt/espocrm" "EspoCRM-*.zip"
-
-    msg_info "Migrating EspoCRM"
-    cd /opt/espocrm
-    $STD php bin/command clear-cache
-    if ! $STD php bin/command migrate; then
-      chown -R www-data:www-data /opt/espocrm
-      systemctl start php8.4-fpm
-      systemctl start cron nginx
-      msg_error "Migration failed; customizations may be incompatible. Check /opt/espocrm/data/logs, then run update again."
-      exit 1
-    fi
-    chown -R www-data:www-data /opt/espocrm
-    msg_ok "Migrated EspoCRM"
-
-    msg_info "Starting Services"
-    systemctl start php8.4-fpm
-    systemctl start cron nginx
-    msg_ok "Started Services"
-    msg_ok "Updated successfully!"
-  fi
-  exit
-}
-
-start
-build_container
-description
-
-msg_ok "Completed successfully!\n"
-echo -e "${CREATING}${GN}${APP} setup has been successfully initialized!${CL}"
-echo -e "${INFO}${YW}Access it using the following URL:${CL}"
-echo -e "${GATEWAY}${BGN}http://${IP}${CL}"
@@ -1,66 +0,0 @@
-#!/usr/bin/env bash
-_cs_boot="${COMMUNITY_SCRIPTS_CORE_DIR:-$(dirname "${BASH_SOURCE[0]}")/../../core}/core/build.func"
-source "$_cs_boot" 2>/dev/null || source <(curl -fsSL "${COMMUNITY_SCRIPTS_CORE_URL:-https://raw.githubusercontent.com/community-scripts/core/main}/core/build.func")
-# Copyright (c) 2021-2026 community-scripts ORG
-# Author: MickLesk (CanbiZ)
-# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
-# Source: https://github.com/mozilla-services/syncstorage-rs
-
-APP="Firefox-Syncserver"
-var_tags="${var_tags:-sync;firefox}"
-var_cpu="${var_cpu:-2}"
-var_ram="${var_ram:-3072}"
-var_disk="${var_disk:-10}"
-var_os="${var_os:-debian}"
-var_version="${var_version:-13}"
-#var_arm64="${var_arm64:-yes}" # built from source, nothing x86-only, but not yet run on arm64
-var_unprivileged="${var_unprivileged:-1}"
-
-header_info "$APP"
-variables
-color
-catch_errors
-
-function update_script() {
-  header_info
-  check_container_storage
-  check_container_resources
-
-  if [[ ! -f /usr/local/bin/syncserver ]]; then
-    msg_error "No ${APP} Installation Found!"
-    exit
-  fi
-
-  if check_for_gh_release "firefox-syncserver" "mozilla-services/syncstorage-rs"; then
-    msg_info "Stopping Firefox Syncserver"
-    systemctl stop firefox-syncserver
-    msg_ok "Stopped Firefox Syncserver"
-
-    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "firefox-syncserver" "mozilla-services/syncstorage-rs" "tarball"
-    setup_rust
-
-    msg_info "Building Firefox Syncserver (Patience)"
-    cd /opt/firefox-syncserver
-    $STD cargo build --release --locked --no-default-features --features=syncstorage-db/postgres --features=tokenserver-db/postgres --features=py_verifier
-    cp target/release/syncserver /usr/local/bin/syncserver
-    rm -rf target
-    $STD uv venv --python /usr/bin/python3 /opt/firefox-syncserver/.venv
-    $STD uv pip install --python /opt/firefox-syncserver/.venv/bin/python pyfxa tokenlib cryptography
-    msg_ok "Built Firefox Syncserver"
-
-    msg_info "Starting Firefox Syncserver"
-    systemctl start firefox-syncserver
-    msg_ok "Started Firefox Syncserver"
-    msg_ok "Updated successfully!"
-  fi
-  exit
-}
-
-start
-build_container
-description
-
-msg_ok "Completed Successfully!\n"
-echo -e "${CREATING}${GN}${APP} setup has been successfully initialized!${CL}"
-echo -e "${INFO}${YW}In Firefox, set identity.sync.tokenserver.uri in about:config to:${CL}"
-echo -e "${GATEWAY}${BGN}http://${IP}:8000/1.0/sync/1.5${CL}"
@@ -70,7 +70,32 @@ function update_script() {
    exit
  fi
  if [ "$UPD" == "4" ]; then
-    bash -c "$(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/tools/addon/filebrowser.sh)"
+    msg_info "Installing FileBrowser"
+    RELEASE=$(curl -fsSL https://api.github.com/repos/filebrowser/filebrowser/releases/latest | grep -o '"tag_name": ".*"' | sed 's/"//g' | sed 's/tag_name: //g')
+    $STD curl -fsSL https://github.com/filebrowser/filebrowser/releases/download/v2.23.0/linux-$(arch_resolve)-filebrowser.tar.gz | tar -xzv -C /usr/local/bin
+    $STD filebrowser config init -a '0.0.0.0'
+    $STD filebrowser config set -a '0.0.0.0'
+    $STD filebrowser users add admin community-scripts.org --perm.admin
+    msg_ok "Installed FileBrowser"
+
+    msg_info "Creating Service"
+    service_path="/etc/systemd/system/filebrowser.service"
+    echo "[Unit]
+Description=Filebrowser
+After=network-online.target
+[Service]
+User=root
+WorkingDirectory=/root/
+ExecStart=/usr/local/bin/filebrowser -r /
+[Install]
+WantedBy=default.target" >$service_path
+
+    $STD systemctl enable --now filebrowser
+    msg_ok "Created Service"
+
+    msg_ok "Completed successfully!\n"
+    echo -e "FileBrowser should be reachable by going to the following URL.
+         ${BL}http://$LOCAL_IP:8080${CL}   admin|community-scripts.org\n"
    exit
  fi
 }
@@ -131,18 +131,7 @@ EOF

  if check_for_gh_release "Immich" "immich-app/immich" "${RELEASE}" "each release is tested individually before the version is updated. Please do not open issues for this"; then
    msg_warn "The update takes 5-15 minutes, do not interrupt it"
-    PREV_IMMICH="${CS_PREVIOUS_VERSION:-$(cat ~/.immich)}"
-    INSTALL_DIR="/opt/${APP}"
-    UPLOAD_DIR="$(sed -n '/^IMMICH_MEDIA_LOCATION/s/[^=]*=//p' /opt/immich/.env)"
-    SRC_DIR="${INSTALL_DIR}/source"
-    APP_DIR="${INSTALL_DIR}/app"
-    PLUGIN_DIR="${APP_DIR}/plugins/immich-plugin-core"
-    ML_DIR="${APP_DIR}/machine-learning"
-    GEO_DIR="${INSTALL_DIR}/geodata"
-
-    setup_uv
-    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "Immich" "immich-app/immich" "tarball" "${RELEASE}" "$SRC_DIR"
-
+    PREV_IMMICH="$(cat ~/.immich)"
    # An interrupted update leaves app/ empty, so there may be no immich-admin to call.
    if [[ "$PREV_IMMICH" > "2.5.1" && -x /opt/immich/app/bin/immich-admin ]]; then
      msg_info "Enabling Maintenance Mode"
@@ -152,7 +141,6 @@ EOF
      $STD cd -
      msg_ok "Enabled Maintenance Mode"
    fi
-    [[ -x /opt/immich/app/bin/immich-admin ]] || export MAINT_MODE=1
    msg_info "Stopping Services"
    systemctl stop immich-web
    systemctl stop immich-ml
@@ -176,6 +164,14 @@ EOF
    fi
    ensure_dependencies ccache gcc-13 g++-13

+    INSTALL_DIR="/opt/${APP}"
+    UPLOAD_DIR="$(sed -n '/^IMMICH_MEDIA_LOCATION/s/[^=]*=//p' /opt/immich/.env)"
+    SRC_DIR="${INSTALL_DIR}/source"
+    APP_DIR="${INSTALL_DIR}/app"
+    PLUGIN_DIR="${APP_DIR}/plugins/immich-plugin-core"
+    ML_DIR="${APP_DIR}/machine-learning"
+    GEO_DIR="${INSTALL_DIR}/geodata"
+
    [[ -f "$ML_DIR"/ml_start.sh ]] && cp "$ML_DIR"/ml_start.sh "$INSTALL_DIR"
    if grep -qs "set -a" "$APP_DIR"/bin/start.sh && grep -qs "warnings" "$APP_DIR"/bin/start.sh; then
      cp "$APP_DIR"/bin/start.sh "$INSTALL_DIR"
@@ -197,6 +193,8 @@ EOF
      rm -rf "${APP_DIR:?}"/*
    )

+    setup_uv
+    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "Immich" "immich-app/immich" "tarball" "${RELEASE}" "$SRC_DIR"
    PNPM_VERSION="$(jq -r '.packageManager | split("@")[1] | split("+")[0]' ${SRC_DIR}/package.json)"
    export COREPACK_ENABLE_DOWNLOAD_PROMPT=0
    export CI=1
@@ -421,7 +419,7 @@ function compile_libjxl() {
    $STD git clone https://github.com/libjxl/libjxl.git "$SOURCE"
    cd "$SOURCE"
    $STD git reset --hard "$LIBJXL_REVISION"
-    $STD git submodule update --init --recursive --depth 1 --recommend-shallow -- third_party
+    $STD git submodule update --init --recursive --depth 1 --recommend-shallow
    mkdir build
    cd build
    $STD cmake \
@@ -32,14 +32,14 @@ function update_script() {
  fi

  if check_for_gh_tag "kan" "kanbn/kan"; then
-    NODE_VERSION="24" NODE_MODULE="pnpm" setup_nodejs
-    
    msg_info "Stopping Service"
    systemctl stop kan
    msg_ok "Stopped Service"

    create_backup /opt/kan/.env
+
    CLEAN_INSTALL=1 fetch_and_deploy_gh_tag "kan" "kanbn/kan" "latest"
+
    restore_backup

    msg_info "Building Application"
@@ -9,7 +9,7 @@ source "$_cs_boot" 2>/dev/null || source <(curl -fsSL "${COMMUNITY_SCRIPTS_CORE_
 APP="MyIP"
 var_tags="${var_tags:-network}"
 var_cpu="${var_cpu:-2}"
-var_ram="${var_ram:-2048}"
+var_ram="${var_ram:-1024}"
 var_disk="${var_disk:-4}"
 var_os="${var_os:-debian}"
 var_version="${var_version:-13}"
@@ -30,7 +30,7 @@ function update_script() {
    exit
  fi

-  NODE_VERSION="26" setup_nodejs
+  NODE_VERSION="24" setup_nodejs

  if check_for_gh_release "myip" "jason5ng32/MyIP"; then
    msg_info "Stopping Services"
@@ -32,14 +32,9 @@ function update_script() {

  if check_for_gh_release "openobserve" "openobserve/openobserve"; then
    msg_info "Updating OpenObserve"
-    if grep -q "^ExecStop=killall" /etc/systemd/system/openobserve.service; then
-      sed -i "/^ExecStop=killall/d" /etc/systemd/system/openobserve.service
-      systemctl daemon-reload
-    fi
    systemctl stop openobserve
    RELEASE=$(get_latest_github_release "openobserve/openobserve")
-    tar zxf <(curl -fsSL https://downloads.openobserve.ai/releases/openobserve/v$RELEASE/openobserve-v$RELEASE-linux-$(arch_resolve).tar.gz) -C /opt/openobserve --no-same-owner
-    echo "${RELEASE}" >~/.openobserve
+    tar zxf <(curl -fsSL https://downloads.openobserve.ai/releases/openobserve/v$RELEASE/openobserve-v$RELEASE-linux-$(arch_resolve).tar.gz) -C /opt/openobserve
    systemctl start openobserve
    msg_ok "Updated OpenObserve"
    msg_ok "Updated successfully!"
@@ -0,0 +1,79 @@
+#!/usr/bin/env bash
+_cs_boot="${COMMUNITY_SCRIPTS_CORE_DIR:-$(dirname "${BASH_SOURCE[0]}")/../../core}/core/build.func"
+source "$_cs_boot" 2>/dev/null || source <(curl -fsSL "${COMMUNITY_SCRIPTS_CORE_URL:-https://raw.githubusercontent.com/community-scripts/core/main}/core/build.func")
+
+# Copyright (c) 2021-2026 community-scripts ORG
+# Author: MickLesk (CanbiZ)
+# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
+# Source: https://pixelfed.org/
+
+APP="Pixelfed"
+var_tags="${var_tags:-fediverse;social}"
+var_cpu="${var_cpu:-2}"
+var_ram="${var_ram:-2048}"
+var_disk="${var_disk:-10}"
+var_os="${var_os:-debian}"
+var_version="${var_version:-13}"
+# var_arm64="${var_arm64:-no}"
+var_unprivileged="${var_unprivileged:-1}"
+
+header_info "$APP"
+variables
+color
+catch_errors
+
+function update_script() {
+  header_info
+  check_container_storage
+  check_container_resources
+
+  if [[ ! -d /opt/pixelfed ]]; then
+    msg_error "No ${APP} Installation Found!"
+    exit
+  fi
+
+  if check_for_gh_release "pixelfed" "pixelfed/pixelfed"; then
+    msg_info "Stopping Services"
+    systemctl stop pixelfed-horizon pixelfed-scheduler.timer
+    msg_ok "Services stopped"
+
+    create_backup /opt/pixelfed/.env \
+      /opt/pixelfed/storage
+
+    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "pixelfed" "pixelfed/pixelfed" "tarball" "latest" "/opt/pixelfed"
+
+    restore_backup
+
+    msg_info "Updating Pixelfed"
+    cd /opt/pixelfed
+    chmod -R 755 /opt/pixelfed
+    chmod -R 775 /opt/pixelfed/storage /opt/pixelfed/bootstrap/cache
+    export COMPOSER_ALLOW_SUPERUSER=1
+    $STD composer install --no-dev --no-ansi --no-interaction --optimize-autoloader
+    chown -R pixelfed:pixelfed /opt/pixelfed
+    $STD sudo -u pixelfed php artisan storage:link
+    $STD sudo -u pixelfed php artisan migrate --force
+    $STD sudo -u pixelfed php artisan route:cache
+    $STD sudo -u pixelfed php artisan view:cache
+    $STD sudo -u pixelfed php artisan config:cache
+    $STD sudo -u pixelfed php artisan horizon:publish
+    msg_ok "Updated Pixelfed"
+
+    msg_info "Starting Services"
+    systemctl start pixelfed-horizon pixelfed-scheduler.timer
+    msg_ok "Services started"
+    msg_ok "Updated successfully!"
+  fi
+  exit
+}
+
+start
+build_container
+description
+
+msg_ok "Completed successfully!\n"
+echo -e "${CREATING}${GN}${APP} setup has been successfully initialized!${CL}"
+echo -e "${INFO}${YW}Access it using the following URL:${CL}"
+echo -e "${GATEWAY}${BGN}http://${IP}${CL}"
+echo -e "${INFO}${YW} Create an admin account with:${CL}"
+echo -e "${TAB}cd /opt/pixelfed && sudo -u pixelfed php artisan user:create"
@@ -66,7 +66,33 @@ function update_script() {
    exit
  fi
  if [ "$UPD" == "3" ]; then
-    bash -c "$(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/tools/addon/filebrowser.sh)"
+    msg_info "Installing FileBrowser"
+    $STD curl -fsSL https://raw.githubusercontent.com/filebrowser/get/master/get.sh | bash
+    $STD filebrowser config init -a '0.0.0.0'
+    $STD filebrowser config set -a '0.0.0.0'
+    $STD filebrowser users add admin community-scripts.org --perm.admin
+    msg_ok "Installed FileBrowser"
+
+    msg_info "Creating Service"
+    cat <<EOF >/etc/systemd/system/filebrowser.service
+[Unit]
+Description=Filebrowser
+After=network-online.target
+
+[Service]
+User=root
+WorkingDirectory=/root/
+ExecStart=/usr/local/bin/filebrowser -r /
+
+[Install]
+WantedBy=default.target
+EOF
+    systemctl enable -q --now filebrowser
+    msg_ok "Created Service"
+
+    msg_ok "Completed successfully!\n"
+    echo -e "FileBrowser should be reachable by going to the following URL.
+         ${BL}http://$LOCAL_IP:8080${CL}   admin|community-scripts.org\n"
    exit
  fi
  if [ "$UPD" == "4" ]; then
@@ -107,9 +107,8 @@ function update_script() {
    ln -sfn "$ROMM_BASE"/resources /opt/romm/frontend/dist/assets/romm/resources
    ln -sfn "$ROMM_BASE"/assets /opt/romm/frontend/dist/assets/romm/assets
    if [[ -f /etc/angie/http.d/romm.conf ]]; then
-      if ! grep -q "js_content decode.decodeBase64" /etc/angie/http.d/romm.conf ||
-        ! grep -q "coep_header" /etc/angie/http.d/romm.conf; then
-        msg_info "Updating Angie config (decode/cache locations, player isolation headers)"
+      if ! grep -q "js_content decode.decodeBase64" /etc/angie/http.d/romm.conf; then
+        msg_info "Adding missing /decode and /cache locations to Angie config"
        dpkg -l angie-module-njs &>/dev/null || $STD apt install -y angie-module-njs
        grep -q "ngx_http_js_module.so" /etc/angie/angie.conf || sed -i '1i load_module modules/ngx_http_js_module.so;' /etc/angie/angie.conf
        mkdir -p /etc/angie/js "${ROMM_BASE}/cache"
@@ -148,20 +147,6 @@ map \$http_upgrade \$connection_upgrade {
    '' close;
 }

-# COEP/COOP for the EmulatorJS and js-dos players (SharedArrayBuffer needs a
-# crossOriginIsolated document). Matched on \$request_uri because try_files
-# rewrites \$uri to /index.html before add_header runs, so a per-location
-# add_header on the player route never fires. Mirrors upstream RomM's
-# docker/nginx/templates/default.conf.template.
-map \$request_uri \$coep_header {
-    default        "";
-    ~^/rom/.*/(ejs|jsdos)(\?|\$) "require-corp";
-}
-map \$request_uri \$coop_header {
-    default        "";
-    ~^/rom/.*/(ejs|jsdos)(\?|\$) "same-origin";
-}
-
 server {
    listen 80;
    server_name _;
@@ -170,9 +155,6 @@ server {

    location / {
        try_files \$uri \$uri/ /index.html;
-        add_header Cache-Control "no-cache";
-        add_header Cross-Origin-Embedder-Policy \$coep_header;
-        add_header Cross-Origin-Opener-Policy \$coop_header;
    }

    location /assets {
@@ -182,6 +164,12 @@ server {
        add_header Cache-Control "public, immutable";
    }

+    location ~ ^/rom/.*/ejs\$ {
+        add_header Cross-Origin-Embedder-Policy "require-corp";
+        add_header Cross-Origin-Opener-Policy "same-origin";
+        try_files \$uri /index.html;
+    }
+
    location /api {
        proxy_pass http://romm_backend;
        proxy_buffering off;
@@ -221,7 +209,7 @@ server {
    }
 }
 EOF
-        msg_ok "Updated Angie config"
+        msg_ok "Added /decode and /cache locations"
      else
        sed -i -e "s|alias .*/library/;|alias ${ROMM_BASE}/library/;|" \
          -e "s|alias .*/cache/;|alias ${ROMM_BASE}/cache/;|" /etc/angie/http.d/romm.conf
@@ -38,7 +38,7 @@ function update_script() {

    create_backup /opt/yuvomi/data /opt/yuvomi/.env

-    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "yuvomi" "ulsklyc/yuvomi" "prebuild" "latest" "/opt/yuvomi" "yuvomi-*-dist.tar.gz"
+    CLEAN_INSTALL=1 fetch_and_deploy_gh_release "yuvomi" "ulsklyc/yuvomi" "tarball"
    NODE_VERSION="24" setup_nodejs

    msg_info "Installing Node.js Dependencies"
@@ -9,7 +9,7 @@ source "$_cs_boot" 2>/dev/null || source <(curl -fsSL "${COMMUNITY_SCRIPTS_CORE_
 APP="Zipline"
 var_tags="${var_tags:-file;sharing}"
 var_cpu="${var_cpu:-2}"
-var_ram="${var_ram:-3072}"
+var_ram="${var_ram:-2048}"
 var_disk="${var_disk:-5}"
 var_os="${var_os:-debian}"
 var_version="${var_version:-13}"
@@ -48,7 +48,6 @@ chown -R archivebox:archivebox /opt/archivebox/{data,.npm,.cache,.local}
 chmod -R 755 /opt/archivebox/data
 $STD uv pip install archivebox --system --break-system-packages
 cd /opt/archivebox/data
-ADMIN_PASS=$(random_password 20)
 expect <<EOF
 set timeout -1
 log_user 0
@@ -63,18 +62,13 @@ expect "Email address"
 send "\r"

 expect "Password"
-send "${ADMIN_PASS}\r"
+send "community-scripts.org\r"

 expect "Password (again)"
-send "${ADMIN_PASS}\r"
+send "community-scripts.org\r"

 expect eof
 EOF
-{
-  echo "ArchiveBox Credentials"
-  echo "Username: archivebox"
-  echo "Password: ${ADMIN_PASS}"
-} >~/archivebox.creds
 msg_ok "Installed ArchiveBox"

 msg_info "Creating Service"
@@ -63,19 +63,12 @@ else
 fi
 echo "$AUTHELIA_URL" >/etc/authelia/.authelia_url

-AUTHELIA_PASS=$(random_password 20)
-AUTHELIA_HASH=$(authelia crypto hash generate argon2 --password "$AUTHELIA_PASS" | awk '/Digest:/{print $2}')
-{
-  echo "Authelia Credentials"
-  echo "Username: authelia"
-  echo "Password: ${AUTHELIA_PASS}"
-} >~/authelia.creds
 cat <<EOF >/etc/authelia/users.yml
 users:
  authelia:
    disabled: false
    displayname: "Authelia Admin"
-    password: "${AUTHELIA_HASH}"
+    password: "\$argon2id\$v=19\$m=65536,t=3,p=4\$ZBopMzXrzhHXPEZxRDVT2w\$SxWm96DwhOsZyn34DLocwQEIb4kCDsk632PuiMdZnig"
    groups: []
 EOF
 cat <<EOF >/etc/authelia/configuration.yml
@@ -1,54 +0,0 @@
-#!/usr/bin/env bash
-
-# Copyright (c) 2021-2026 community-scripts ORG
-# Author: MickLesk (CanbiZ)
-# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
-# Source: https://github.com/chattocorp/chatto
-
-source /dev/stdin <<<"$FUNCTIONS_FILE_PATH"
-color
-verb_ip6
-catch_errors
-setting_up_container
-network_check
-update_os
-
-fetch_and_deploy_gh_release "chatto" "chattocorp/chatto" "prebuild" "latest" "/opt/chatto" "chatto_Linux_$(arch_resolve x86_64 arm64).tar.gz"
-chmod +x /opt/chatto/chatto
-
-msg_info "Configuring Chatto"
-mkdir -p /opt/chatto_data
-cd /opt/chatto
-$STD ./chatto init
-mv /opt/chatto/chatto.toml /opt/chatto_data/chatto.toml
-sed -i \
-  -e "/^\[webserver\]/,/^\[/ s|^url = .*|url = 'http://${LOCAL_IP}:4000'|" \
-  -e "/^\[nats.embedded\]/,/^\[/ s|^data_dir = .*|data_dir = '/opt/chatto_data/data'|" \
-  -e '/^# \[operator_api\]$/,/^$/ { s|^# \[operator_api\]$|[operator_api]|; s|^# enabled = false$|enabled = true| }' \
-  /opt/chatto_data/chatto.toml
-msg_ok "Configured Chatto"
-
-msg_info "Creating Service"
-cat <<EOF >/etc/systemd/system/chatto.service
-[Unit]
-Description=Chatto
-After=network-online.target
-Wants=network-online.target
-
-[Service]
-Type=simple
-User=root
-WorkingDirectory=/opt/chatto
-ExecStart=/opt/chatto/chatto run -c /opt/chatto_data/chatto.toml
-Restart=always
-RestartSec=5
-
-[Install]
-WantedBy=multi-user.target
-EOF
-systemctl enable -q --now chatto
-msg_ok "Created Service"
-
-motd_ssh
-customize
-cleanup_lxc
@@ -24,7 +24,7 @@ $STD apt install -y \
 msg_ok "Installed Dependencies"

 setup_ffmpeg
-NODE_VERSION="26" setup_nodejs
+NODE_VERSION="24" setup_nodejs
 fetch_and_deploy_gh_release "cinephage" "MoldyTaint/Cinephage" "tarball"

 msg_info "Building Cinephage"
@@ -17,7 +17,7 @@ msg_info "Installing Dependencies"
 $STD apt install -y build-essential
 msg_ok "Installed Dependencies"

-NODE_VERSION="26" setup_nodejs
+NODE_VERSION="24" setup_nodejs

 msg_info "Setup Cross-Seed"
 $STD npm install cross-seed@latest -g
@@ -16,47 +16,119 @@ update_os
 msg_info "Installing Dependencies"
 $STD apt install -y \
  nginx \
-  libedit2 \
-  libgssapi-krb5-2 \
-  libncurses6 \
-  libreadline8t64
+  valkey \
+  mariadb-client \
+  rclone
 msg_ok "Installed Dependencies"

 PG_VERSION="17" setup_postgresql
 NODE_VERSION="24" NODE_MODULE="corepack" setup_nodejs

+msg_info "Installing Database Clients"
+# Create PostgreSQL version symlinks for compatibility
+for v in 12 13 14 15 16 18; do
+  ln -sf /usr/lib/postgresql/17 /usr/lib/postgresql/$v
+done
+# Install MongoDB Database Tools via direct .deb (no APT repo for Debian 13)
+[[ "$(get_os_info id)" == "ubuntu" ]] && MONGO_DIST="ubuntu2204" || MONGO_DIST="debian12"
+# MongoDB only publishes arm64 builds for Ubuntu
+[[ "$(arch_resolve "x86_64" "arm64")" == "arm64" ]] && MONGO_DIST="ubuntu2204"
+MONGO_VERSION=$(get_latest_gh_tag "mongodb/mongo-tools" "100." || echo "100.16.1")
+fetch_and_deploy_from_url "https://fastdl.mongodb.org/tools/db/mongodb-database-tools-${MONGO_DIST}-$(arch_resolve "x86_64" "arm64")-${MONGO_VERSION}.deb" ""
+mkdir -p /usr/local/mongodb-database-tools/bin
+[[ -f /usr/bin/mongodump ]] && ln -sf /usr/bin/mongodump /usr/local/mongodb-database-tools/bin/mongodump
+[[ -f /usr/bin/mongorestore ]] && ln -sf /usr/bin/mongorestore /usr/local/mongodb-database-tools/bin/mongorestore
+# Create MariaDB and MySQL client symlinks for compatibility
+mkdir -p /usr/local/mariadb-{10.6,12.1}/bin /usr/local/mysql-{5.7,8.0,8.4,9}/bin
+for dir in /usr/local/mariadb-{10.6,12.1}/bin; do
+  ln -sf /usr/bin/mariadb-dump "$dir/mariadb-dump"
+  ln -sf /usr/bin/mariadb "$dir/mariadb"
+done
+for dir in /usr/local/mysql-{5.7,8.0,8.4,9}/bin; do
+  ln -sf /usr/bin/mariadb-dump "$dir/mysqldump"
+  ln -sf /usr/bin/mariadb "$dir/mysql"
+done
+msg_ok "Installed Database Clients"
+
 fetch_and_deploy_gh_release "databasus" "databasus/databasus" "tarball" "latest" "/opt/databasus"
 GO_VERSION="$(grep -m1 '^go ' /opt/databasus/backend/go.mod | awk '{print $2}')" setup_go

 msg_info "Building Databasus (Patience)"
-RELEASE=$(cat ~/.databasus)
 export COREPACK_ENABLE_DOWNLOAD_PROMPT=0
 cd /opt/databasus/frontend
+
 $STD corepack prepare pnpm@latest --activate
 $STD pnpm install --frozen-lockfile
-$STD env VITE_APP_VERSION="${RELEASE}" pnpm run build
+$STD pnpm run build
 cd /opt/databasus/backend
-$STD env CGO_ENABLED=0 GOOS=linux GOARCH="$(arch_resolve)" go build -o /opt/databasus/databasus ./cmd/databasus
-mkdir -p /opt/databasus/agent-binaries
-for arch in amd64 arm64; do
-  $STD env CGO_ENABLED=0 GOOS=linux GOARCH=$arch go build -ldflags "-X main.Version=${RELEASE}" -o /opt/databasus/agent-binaries/databasus-verification-agent-linux-$arch ./cmd/verification-agent
-done
+$STD go mod tidy
+$STD go mod download
+$STD go install github.com/swaggo/swag/cmd/swag@latest
+$STD /root/go/bin/swag init -g cmd/main.go -o swagger
+$STD env CGO_ENABLED=0 GOOS=linux GOARCH=$(arch_resolve) go build -o databasus ./cmd
+mv /opt/databasus/backend/databasus /opt/databasus/databasus
 mkdir -p /databasus-data/{pgdata,temp,backups,data,logs}
 mkdir -p /opt/databasus/ui/build
+mkdir -p /opt/databasus/migrations
 cp -r /opt/databasus/frontend/dist/* /opt/databasus/ui/build/
+cp -r /opt/databasus/backend/migrations/* /opt/databasus/migrations/
 chown -R postgres:postgres /databasus-data
 msg_ok "Built Databasus"

 msg_info "Configuring Databasus"
+JWT_SECRET=$(openssl rand -hex 32)
+ENCRYPTION_KEY=$(openssl rand -hex 32)
+# Install goose for migrations
+$STD go install github.com/pressly/goose/v3/cmd/goose@latest
+ln -sf /root/go/bin/goose /usr/local/bin/goose
 cat <<EOF >/.env
+# Environment
 ENV_MODE=production
-APP_VERSION=${RELEASE}
+
+# Server
+SERVER_PORT=4005
+SERVER_HOST=0.0.0.0
+
+# Database
 DATABASE_DSN=host=localhost user=postgres password=postgres dbname=databasus port=5432 sslmode=disable
+DATABASE_URL=postgres://postgres:postgres@localhost:5432/databasus?sslmode=disable
+
+# Migrations
+GOOSE_DRIVER=postgres
+GOOSE_DBSTRING=postgres://postgres:postgres@localhost:5432/databasus?sslmode=disable
+GOOSE_MIGRATION_DIR=/opt/databasus/migrations
+
+# Valkey (Redis-compatible cache)
+VALKEY_HOST=localhost
+VALKEY_PORT=6379
+
+# Security
+JWT_SECRET=${JWT_SECRET}
+ENCRYPTION_KEY=${ENCRYPTION_KEY}
+
+# Paths
+DATA_DIR=/databasus-data/data
+BACKUP_DIR=/databasus-data/backups
+LOG_DIR=/databasus-data/logs
 EOF
 chmod 600 /.env
 msg_ok "Configured Databasus"

+msg_info "Configuring Valkey"
+cat <<EOF >/etc/valkey/valkey.conf
+port 6379
+bind 127.0.0.1
+protected-mode yes
+save ""
+maxmemory 256mb
+maxmemory-policy allkeys-lru
+EOF
+systemctl enable -q --now valkey-server
+systemctl restart valkey-server
+msg_ok "Configured Valkey"
+
 msg_info "Creating Database"
+# Configure PostgreSQL to allow local password auth for databasus
 PG_HBA="/etc/postgresql/17/main/pg_hba.conf"
 if ! grep -q "databasus" "$PG_HBA"; then
  sed -i '/^local\s*all\s*all/i local   databasus   postgres                                trust' "$PG_HBA"
@@ -71,8 +143,8 @@ msg_info "Creating Databasus Service"
 cat <<EOF >/etc/systemd/system/databasus.service
 [Unit]
 Description=Databasus - Database Backup Management
-After=network.target postgresql.service
-Requires=postgresql.service
+After=network.target postgresql.service valkey.service
+Requires=postgresql.service valkey.service

 [Service]
 Type=simple
@@ -1,146 +0,0 @@
-#!/usr/bin/env bash
-
-# Copyright (c) 2021-2026 community-scripts ORG
-# Author: Masked-Kunsiquat
-# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
-# Source: https://www.espocrm.com/ | Github: https://github.com/espocrm/espocrm
-
-source /dev/stdin <<<"$FUNCTIONS_FILE_PATH"
-color
-verb_ip6
-catch_errors
-setting_up_container
-network_check
-update_os
-
-if [[ -z "${var_admin_user:-}" ]]; then
-  var_admin_user=$(prompt_input "EspoCRM admin username (a-z, 0-9, @ . _ -):" "admin" 60)
-fi
-var_admin_user="${var_admin_user:-admin}"
-var_admin_user="${var_admin_user,,}"
-if [[ ! "$var_admin_user" =~ ^[a-z0-9@._-]+$ ]]; then
-  msg_warn "EspoCRM usernames take only a-z, 0-9 and @ . _ -; using admin"
-  var_admin_user="admin"
-fi
-if [[ -z "${var_admin_pass:-}" ]]; then
-  var_admin_pass=$(random_password 16)
-fi
-
-msg_info "Installing Dependencies"
-$STD apt install -y nginx
-msg_ok "Installed Dependencies"
-
-setup_mariadb
-MARIADB_DB_NAME="espocrm" MARIADB_DB_USER="espocrm" setup_mariadb_db
-PHP_VERSION="8.4" PHP_FPM="YES" PHP_MODULE="ldap" setup_php
-fetch_and_deploy_gh_release "espo-crm" "espocrm/espocrm" "prebuild" "latest" "/opt/espocrm" "EspoCRM-*.zip"
-
-msg_info "Configuring EspoCRM"
-cd /opt/espocrm
-$STD php bin/command config:populate
-$STD php bin/command config:set defaultPermissions.user www-data
-$STD php bin/command config:set defaultPermissions.group www-data
-$STD php bin/command config:set database.platform Mysql
-$STD php bin/command config:set database.host localhost
-$STD php bin/command config:set database.dbname "$MARIADB_DB_NAME"
-$STD php bin/command config:set database.user "$MARIADB_DB_USER"
-$STD php bin/command config:set database.password "$MARIADB_DB_PASS"
-$STD php bin/command rebuild
-$STD php bin/command create-admin-user "$var_admin_user"
-printf '%s\n' "$var_admin_pass" | $STD php bin/command set-password "$var_admin_user"
-$STD php bin/command config:set siteUrl "http://${LOCAL_IP}"
-$STD php bin/command populate-scheduled-jobs
-$STD php bin/command config:set jobRunInParallel true --type=bool
-$STD php bin/command app-check
-$STD php bin/command config:set isInstalled true --type=bool
-chown -R www-data:www-data /opt/espocrm
-msg_ok "Configured EspoCRM"
-
-msg_info "Creating Nginx Site"
-PHP_SOCK=$(get_php_fpm_socket)
-cat <<EOF >/etc/nginx/sites-available/espocrm
-server {
-    listen 80 default_server;
-    listen [::]:80 default_server;
-    server_name _;
-
-    charset utf-8;
-    index index.html index.php;
-
-    client_max_body_size 128M;
-    keepalive_timeout 300;
-    server_tokens off;
-    fastcgi_send_timeout 300;
-    fastcgi_read_timeout 300;
-
-    gzip on;
-    gzip_types text/plain text/css text/javascript application/javascript application/json;
-    gzip_min_length 1000;
-
-    root /opt/espocrm/public;
-
-    location /client {
-        root /opt/espocrm;
-        autoindex off;
-
-        location ~* ^.+\.(js|css|png|jpg|svg|svgz|jpeg|gif|ico|tpl)\$ {
-            access_log off;
-            expires max;
-        }
-    }
-
-    location = /favicon.ico { access_log off; log_not_found off; }
-    location = /robots.txt { access_log off; log_not_found off; }
-
-    location ~ \.php\$ {
-        fastcgi_pass unix:${PHP_SOCK};
-        include fastcgi_params;
-        fastcgi_index index.php;
-        fastcgi_param SCRIPT_FILENAME \$document_root\$fastcgi_script_name;
-        fastcgi_param QUERY_STRING \$query_string;
-    }
-
-    location /api/v1/ {
-        if (!-e \$request_filename) {
-            rewrite ^/api/v1/(.*)\$ /api/v1/index.php last;
-        }
-    }
-
-    location /portal/ {
-        try_files \$uri \$uri/ /portal/index.php?\$query_string;
-    }
-
-    location /api/v1/portal-access {
-        if (!-e \$request_filename) {
-            rewrite ^/api/v1/(.*)\$ /api/v1/portal-access/index.php last;
-        }
-    }
-
-    location ~ /(\.htaccess|web\.config|\.git) {
-        deny all;
-    }
-}
-EOF
-msg_ok "Created Nginx Site"
-nginx_enable_site "espocrm"
-
-msg_info "Setting up Cron"
-cat <<EOF >/etc/cron.d/espocrm
-* * * * * www-data cd /opt/espocrm && php -f cron.php >/dev/null 2>&1
-EOF
-systemctl enable -q --now cron
-msg_ok "Set up Cron"
-
-msg_info "Saving Credentials"
-cat <<EOF >>~/espocrm.creds
-
-EspoCRM Admin
-Username: ${var_admin_user}
-Password: ${var_admin_pass}
-EOF
-chmod 600 ~/espocrm.creds
-msg_ok "Saved Credentials"
-
-motd_ssh
-customize
-cleanup_lxc
@@ -26,7 +26,6 @@ chown -R www-data:www-data /opt/firefly
 chmod -R 775 /opt/firefly/storage
 cd /opt/firefly
 cp .env.example .env
-sed -i -e "s|^APP_KEY=.*|APP_KEY=$(random_password 32)|" -e "s|^STATIC_CRON_TOKEN=.*|STATIC_CRON_TOKEN=$(random_password 32)|" /opt/firefly/.env
 sed -i "s/DB_HOST=.*/DB_HOST=localhost/" /opt/firefly/.env
 sed -i "s/DB_PASSWORD=.*/DB_PASSWORD=$MARIADB_DB_PASS/" /opt/firefly/.env
 $STD composer install --no-dev --no-plugins --no-interaction
@@ -1,99 +0,0 @@
-#!/usr/bin/env bash
-
-# Copyright (c) 2021-2026 community-scripts ORG
-# Author: MickLesk (CanbiZ)
-# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
-# Source: https://github.com/mozilla-services/syncstorage-rs
-
-source /dev/stdin <<<"$FUNCTIONS_FILE_PATH"
-color
-verb_ip6
-catch_errors
-setting_up_container
-network_check
-update_os
-
-msg_info "Installing Dependencies"
-$STD apt install -y \
-  build-essential \
-  pkg-config \
-  libssl-dev \
-  libpq-dev \
-  python3-dev
-msg_ok "Installed Dependencies"
-
-PG_VERSION="18" setup_postgresql
-PG_DB_NAME="syncserver" PG_DB_USER="syncserver" setup_postgresql_db
-setup_rust
-setup_uv
-
-fetch_and_deploy_gh_release "firefox-syncserver" "mozilla-services/syncstorage-rs" "tarball"
-
-msg_info "Building Firefox Syncserver (Patience)"
-cd /opt/firefox-syncserver
-$STD cargo build --release --locked --no-default-features --features=syncstorage-db/postgres --features=tokenserver-db/postgres --features=py_verifier
-cp target/release/syncserver /usr/local/bin/syncserver
-rm -rf target
-$STD uv venv --python /usr/bin/python3 /opt/firefox-syncserver/.venv
-$STD uv pip install --python /opt/firefox-syncserver/.venv/bin/python pyfxa tokenlib cryptography
-msg_ok "Built Firefox Syncserver"
-
-msg_info "Configuring Firefox Syncserver"
-mkdir -p /opt/firefox-syncserver_data
-cat <<EOF >/opt/firefox-syncserver_data/.env
-SYNC_HOST=0.0.0.0
-SYNC_PORT=8000
-SYNC_MASTER_SECRET=$(openssl rand -hex 32)
-SYNC_HUMAN_LOGS=true
-RUST_LOG=info
-SYNC_SYNCSTORAGE__DATABASE_URL=postgres://syncserver:${PG_DB_PASS}@127.0.0.1:5432/syncserver
-SYNC_SYNCSTORAGE__GLEAN_ENABLED=false
-SYNC_TOKENSERVER__ENABLED=true
-SYNC_TOKENSERVER__RUN_MIGRATIONS=true
-SYNC_TOKENSERVER__DATABASE_URL=postgres://syncserver:${PG_DB_PASS}@127.0.0.1:5432/syncserver
-SYNC_TOKENSERVER__NODE_TYPE=postgres
-SYNC_TOKENSERVER__FXA_EMAIL_DOMAIN=api.accounts.firefox.com
-SYNC_TOKENSERVER__FXA_OAUTH_SERVER_URL=https://oauth.accounts.firefox.com
-SYNC_TOKENSERVER__INIT_NODE_URL=http://${LOCAL_IP}:8000
-EOF
-chmod 600 /opt/firefox-syncserver_data/.env
-cat <<'EOF' >/opt/firefox-syncserver_data/nodes.sql
-SELECT to_regclass('nodes') IS NOT NULL AS ready \gset
-\if :ready
-UPDATE nodes SET node = :'url'
- WHERE id = (SELECT min(id) FROM nodes)
-   AND NOT EXISTS (SELECT 1 FROM nodes WHERE node = :'url');
-UPDATE users SET nodeid = (SELECT id FROM nodes WHERE node = :'url')
- WHERE nodeid <> (SELECT id FROM nodes WHERE node = :'url');
-DELETE FROM nodes WHERE node <> :'url';
-\endif
-EOF
-msg_ok "Configured Firefox Syncserver"
-
-msg_info "Creating Service"
-cat <<EOF >/etc/systemd/system/firefox-syncserver.service
-[Unit]
-Description=Firefox Syncserver
-After=network.target postgresql.service
-Wants=postgresql.service
-
-[Service]
-Type=simple
-User=root
-WorkingDirectory=/opt/firefox-syncserver
-EnvironmentFile=/opt/firefox-syncserver_data/.env
-Environment=PYTHONPATH=/opt/firefox-syncserver/.venv/lib/python3.13/site-packages
-ExecStartPre=/usr/bin/psql -1 -q -v ON_ERROR_STOP=1 -v url=\${SYNC_TOKENSERVER__INIT_NODE_URL} -f /opt/firefox-syncserver_data/nodes.sql \${SYNC_TOKENSERVER__DATABASE_URL}
-ExecStart=/usr/local/bin/syncserver
-Restart=on-failure
-RestartSec=5
-
-[Install]
-WantedBy=multi-user.target
-EOF
-systemctl enable -q --now firefox-syncserver
-msg_ok "Created Service"
-
-motd_ssh
-customize
-cleanup_lxc
@@ -33,13 +33,7 @@ msg_ok "Set up Python Backend"
 msg_info "Configuring Homelable"
 mkdir -p /opt/homelable/data
 SECRET_KEY=$(openssl rand -hex 32)
-HOMELABLE_PASS=$(random_password 20)
-BCRYPT_HASH=$(/opt/homelable/backend/.venv/bin/python -c "import bcrypt,sys; print(bcrypt.hashpw(sys.argv[1].encode(), bcrypt.gensalt()).decode())" "$HOMELABLE_PASS")
-{
-  echo "Homelable Credentials"
-  echo "Username: admin"
-  echo "Password: ${HOMELABLE_PASS}"
-} >~/homelable.creds
+BCRYPT_HASH=$(/opt/homelable/backend/.venv/bin/python -c "import bcrypt; print(bcrypt.hashpw(b'admin', bcrypt.gensalt()).decode())")
 cat <<EOF >/opt/homelable/backend/.env
 SECRET_KEY=${SECRET_KEY}
 SQLITE_PATH=/opt/homelable/data/homelab.db
@@ -222,7 +222,7 @@ LIBJXL_REVISION="$(jq -cr '.revision' "$BASE_DIR"/server/sources/libjxl.json)"
 $STD git clone https://github.com/libjxl/libjxl.git "$SOURCE"
 cd "$SOURCE"
 $STD git reset --hard "$LIBJXL_REVISION"
-$STD git submodule update --init --recursive --depth 1 --recommend-shallow -- third_party
+$STD git submodule update --init --recursive --depth 1 --recommend-shallow
 mkdir build
 cd build
 $STD cmake \
@@ -21,7 +21,7 @@ msg_ok "Installed Dependencies"

 PG_VERSION="16" setup_postgresql
 PG_DB_NAME="kan" PG_DB_USER="kan" setup_postgresql_db
-NODE_VERSION="24" NODE_MODULE="pnpm" setup_nodejs
+NODE_VERSION="20" NODE_MODULE="pnpm" setup_nodejs

 fetch_and_deploy_gh_tag "kan" "kanbn/kan" "latest"

@@ -21,7 +21,6 @@ PG_DB_NAME="keycloak" PG_DB_USER="keycloak" setup_postgresql_db
 fetch_and_deploy_gh_release "keycloak_app" "keycloak/keycloak" "prebuild" "latest" "/opt/keycloak" "keycloak-*.tar.gz"

 msg_info "Creating Service"
-ADMIN_PASS=$(random_password 20)
 cat <<EOF >/etc/systemd/system/keycloak.service
 [Unit]
 Description=Keycloak Service
@@ -41,7 +40,7 @@ Environment="KC_DB_USERNAME=keycloak"
 Environment="KC_DB_PASSWORD=$PG_DB_PASS"
 Environment="KC_HTTP_ENABLED=true"
 Environment="KC_BOOTSTRAP_ADMIN_USERNAME=tmpadm"
-Environment="KC_BOOTSTRAP_ADMIN_PASSWORD=${ADMIN_PASS}"
+Environment="KC_BOOTSTRAP_ADMIN_PASSWORD=admin123"
 # Comment following line and uncomment the next 2 if working behind a reverse proxy
 Environment="KC_HOSTNAME_STRICT=false"
 #Environment="KC_HOSTNAME=keycloak.example.com"
@@ -49,13 +48,6 @@ Environment="KC_HOSTNAME_STRICT=false"
 [Install]
 WantedBy=multi-user.target
 EOF
-chmod 600 /etc/systemd/system/keycloak.service
-{
-  echo "Keycloak Credentials"
-  echo "Temporary admin, replace it with a permanent one"
-  echo "Username: tmpadm"
-  echo "Password: ${ADMIN_PASS}"
-} >~/keycloak.creds
 systemctl enable -q --now keycloak
 msg_ok "Created Service"

@@ -40,7 +40,6 @@ cp .env.dist .env
 sed -i "/^DATABASE_URL=.*/c\DATABASE_URL=mysql://kimai:$MARIADB_DB_PASS@127.0.0.1:3306/kimai_db?charset=utf8mb4&serverVersion=mariadb-$MYSQL_VERSION" /opt/kimai/.env
 sed -i "s|^APP_SECRET=.*|APP_SECRET=$APP_SECRET|" /opt/kimai/.env
 $STD bin/console kimai:install -n
-ADMIN_PASS=$(random_password 20)
 $STD expect <<EOF
 set timeout -1
 log_user 0
@@ -48,16 +47,10 @@ log_user 0
 spawn bin/console kimai:user:create admin admin@community-scripts.org ROLE_SUPER_ADMIN

 expect "Please enter the password:"
-send "${ADMIN_PASS}\r"
+send "community-scripts.org\r"

 expect eof
 EOF
-{
-  echo "Kimai Credentials"
-  echo "Username: admin"
-  echo "Email: admin@community-scripts.org"
-  echo "Password: ${ADMIN_PASS}"
-} >~/kimai.creds
 $STD composer update --no-interaction
 cat <<EOF >/opt/kimai/config/packages/local.yaml
 kimai:
@@ -33,13 +33,7 @@ $STD yarn config set ignore-engines true
 $STD yarn install
 $STD yarn run production
 $STD php artisan key:generate
-ADMIN_PASS=$(random_password 20)
-$STD php artisan setup:production --email=admin@community-scripts.org --password="${ADMIN_PASS}" --force
-{
-  echo "Monica Credentials"
-  echo "Email: admin@community-scripts.org"
-  echo "Password: ${ADMIN_PASS}"
-} >~/monica.creds
+$STD php artisan setup:production --email=admin@community-scripts.org --password=community-scripts.org --force
 chown -R www-data:www-data /opt/monica
 chmod -R 775 /opt/monica/storage
 echo "* * * * * root php /opt/monica/artisan schedule:run >> /dev/null 2>&1" >>/etc/crontab
@@ -13,7 +13,7 @@ setting_up_container
 network_check
 update_os

-NODE_VERSION="26" setup_nodejs
+NODE_VERSION="24" setup_nodejs
 fetch_and_deploy_gh_release "myip" "jason5ng32/MyIP" "tarball"

 msg_info "Configuring MyIP"
@@ -63,13 +63,7 @@ setcap cap_net_raw+p /bin/ping
 msg_ok "Built Nagios Plugins"

 msg_info "Configuring Web Authentication"
-NAGIOS_PASS=$(random_password 20)
-$STD htpasswd -bc /usr/local/nagios/etc/htpasswd.users nagiosadmin "$NAGIOS_PASS"
-{
-  echo "Nagios Credentials"
-  echo "Username: nagiosadmin"
-  echo "Password: ${NAGIOS_PASS}"
-} >~/nagios.creds
+$STD htpasswd -bc /usr/local/nagios/etc/htpasswd.users nagiosadmin nagiosadmin
 chown root:www-data /usr/local/nagios/etc/htpasswd.users
 chmod 640 /usr/local/nagios/etc/htpasswd.users
 msg_ok "Configured Web Authentication"
@@ -201,13 +201,6 @@ cat <<'EOF' >/etc/neko/openbox.xml
 </openbox_config>
 EOF

-NEKO_ADMIN_PASS=$(random_password 20)
-NEKO_USER_PASS=$(random_password 20)
-{
-  echo "Neko Credentials"
-  echo "Admin password: ${NEKO_ADMIN_PASS}"
-  echo "User password: ${NEKO_USER_PASS}"
-} >~/neko.creds
 cat <<EOF >/etc/neko/neko.yaml
 server:
  bind: "0.0.0.0:8080"
@@ -226,8 +219,8 @@ desktop:
 member:
  provider: "multiuser"
  multiuser:
-    admin_password: "${NEKO_ADMIN_PASS}"
-    user_password: "${NEKO_USER_PASS}"
+    admin_password: "admin"
+    user_password: "neko"
 EOF
 msg_ok "Set up Runtime"

@@ -31,7 +31,6 @@ NODEBB_USER="nodebb"
 NODEBB_PWD="$(random_password 13)"
 MONGO_CONNECTION_STRING="mongodb://${NODEBB_USER}:${NODEBB_PWD}@localhost:27017/nodebb"
 NODEBB_SECRET=$(uuidgen)
-NODEBB_ADMIN_PASS="$(random_password 20)"
 cat <<EOF >~/nodebb.creds
 NodeBB-Credentials
 Mongo Database User: $MONGO_ADMIN_USER
@@ -39,8 +38,6 @@ Mongo Database Password: $MONGO_ADMIN_PWD
 NodeBB User: $NODEBB_USER
 NodeBB Password: $NODEBB_PWD
 NodeBB Secret: $NODEBB_SECRET
-NodeBB Admin User: community-scripts
-NodeBB Admin Password: $NODEBB_ADMIN_PASS
 EOF

 $STD mongosh <<EOF
@@ -100,10 +97,10 @@ expect "Administrator email address" {
    send "admin@community-scripts.org\r"
 }
 expect "Password" {
-    send "$NODEBB_ADMIN_PASS\r"
+    send "community-scripts\r"
 }
 expect "Confirm Password" {
-    send "$NODEBB_ADMIN_PASS\r"
+    send "community-scripts\r"
 }
 expect eof
 EOF
@@ -57,17 +57,11 @@ done
 ACME_EMAIL_INPUT="${var_npmplus_acme_email:-}"
 [[ -n "$ACME_EMAIL_INPUT" ]] || read -r -p "${TAB3}Enter your ACME Email (optional, press ENTER to skip): " ACME_EMAIL_INPUT || true

-ADMIN_PASS=$(random_password 20)
 yq -i "
  .services.npmplus.environment |=
    (map(select(. != \"TZ=*\" and . != \"ACME_EMAIL=*\" and . != \"INITIAL_ADMIN_EMAIL=*\" and . != \"INITIAL_ADMIN_PASSWORD=*\")) +
-    [\"TZ=$TZ_INPUT\", \"ACME_EMAIL=$ACME_EMAIL_INPUT\", \"INITIAL_ADMIN_EMAIL=admin@local.com\", \"INITIAL_ADMIN_PASSWORD=${ADMIN_PASS}\"])
+    [\"TZ=$TZ_INPUT\", \"ACME_EMAIL=$ACME_EMAIL_INPUT\", \"INITIAL_ADMIN_EMAIL=admin@local.com\", \"INITIAL_ADMIN_PASSWORD=community-scripts.org\"])
 " /opt/compose.yaml
-{
-  echo "NPMplus Credentials"
-  echo "Email: admin@local.com"
-  echo "Password: ${ADMIN_PASS}"
-} >~/npmplus.creds

 msg_info "Building and Starting NPMplus (Patience)"
 $STD docker compose up -d
@@ -30,13 +30,7 @@ rm -rf /usr/lib/python3.*/EXTERNALLY-MANAGED
 msg_ok "Setup Python3"

 msg_info "Creating user octoprint"
-OCTOPRINT_PASS=$(random_password 20)
-useradd -m -s /bin/bash -p "$(openssl passwd -6 "$OCTOPRINT_PASS")" octoprint
-{
-  echo "OctoPrint Linux user Credentials"
-  echo "Username: octoprint"
-  echo "Password: ${OCTOPRINT_PASS}"
-} >~/octoprint.creds
+useradd -m -s /bin/bash -p $(openssl passwd -1 octoprint) octoprint
 usermod -aG sudo,tty,dialout octoprint
 chown -R octoprint:octoprint /opt
 echo "octoprint ALL=NOPASSWD: $(command -v systemctl) restart octoprint, $(command -v reboot), $(command -v poweroff)" >/etc/sudoers.d/octoprint
@@ -16,7 +16,7 @@ update_os
 msg_info "Installing OpenObserve"
 mkdir -p /opt/openobserve/data
 RELEASE=$(get_latest_github_release "openobserve/openobserve")
-tar zxf <(curl -fsSL https://downloads.openobserve.ai/releases/openobserve/v$RELEASE/openobserve-v$RELEASE-linux-$(arch_resolve).tar.gz) -C /opt/openobserve --no-same-owner
+tar zxf <(curl -fsSL https://downloads.openobserve.ai/releases/openobserve/v$RELEASE/openobserve-v$RELEASE-linux-$(arch_resolve).tar.gz) -C /opt/openobserve
 ROOT_PASS="$(random_password 9)Aa1!"

 cat <<EOF >/opt/openobserve/data/.env
@@ -25,7 +25,7 @@ ZO_ROOT_USER_PASSWORD = "${ROOT_PASS}"
 ZO_DATA_DIR = "/opt/openobserve/data"
 ZO_HTTP_PORT = "5080"
 EOF
-echo "${RELEASE}" >~/.openobserve
+echo "${RELEASE}" >>~/.openobserve
 msg_ok "Installed OpenObserve"

 msg_info "Creating Service"
@@ -38,6 +38,7 @@ After=network.target
 Type=simple
 EnvironmentFile=/opt/openobserve/data/.env
 ExecStart=/opt/openobserve/openobserve
+ExecStop=killall -QUIT openobserve
 Restart=on-failure

 [Install]
@@ -43,13 +43,7 @@ $STD php artisan migrate --force --seed
 msg_ok "Set up database"

 msg_info "Creating Admin User"
-PAYMENTER_PASS=$(random_password 20)
-$STD php artisan app:user:create paymenter admin admin@paymenter.org "$PAYMENTER_PASS" 1 -q
-{
-  echo "Paymenter Credentials"
-  echo "Email: admin@paymenter.org"
-  echo "Password: ${PAYMENTER_PASS}"
-} >~/paymenter.creds
+$STD php artisan app:user:create paymenter admin admin@paymenter.org paymenter 1 -q
 msg_ok "Created Admin User"

 msg_info "Configuring Nginx"
@@ -46,16 +46,10 @@ tar -xzf /tmp/libheif.tar.gz -C /usr/local
 ldconfig
 echo "${LIBHEIF_URL}" >~/.photoprism_libheif
 chmod -R 755 /opt/photoprism/photos/originals
-ADMIN_PASS=$(random_password 20)
-{
-  echo "PhotoPrism Credentials"
-  echo "Username: admin"
-  echo "Password: ${ADMIN_PASS}"
-} >~/photoprism.creds
 cat <<EOF >/opt/photoprism/config/.env
 # Authentication
 PHOTOPRISM_ADMIN_USER='admin'
-PHOTOPRISM_ADMIN_PASSWORD='${ADMIN_PASS}'
+PHOTOPRISM_ADMIN_PASSWORD='changeme'
 PHOTOPRISM_AUTH_MODE='password'
 PHOTOPRISM_PUBLIC='false'

@@ -118,7 +112,7 @@ StoragePath: "/opt/photoprism/storage"
 OriginalsPath: "/opt/photoprism/photos/originals"
 ImportPath: "/media"
 AdminUser: "admin"
-AdminPassword: "${ADMIN_PASS}"
+AdminPassword: "changeme"
 AuthMode: "password"
 DatabaseDriver: "sqlite"
 HttpHost: "0.0.0.0"
@@ -0,0 +1,236 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2021-2026 community-scripts ORG
+# Author: MickLesk (CanbiZ)
+# License: MIT | https://github.com/community-scripts/ProxmoxVE/raw/main/LICENSE
+# Source: https://pixelfed.org/
+
+source /dev/stdin <<<"$FUNCTIONS_FILE_PATH"
+color
+verb_ip6
+catch_errors
+setting_up_container
+network_check
+update_os
+
+msg_info "Installing Dependencies"
+$STD apt install -y \
+  nginx \
+  redis-server \
+  ffmpeg \
+  jpegoptim \
+  optipng \
+  pngquant \
+  gifsicle \
+  libvips42
+msg_ok "Installed Dependencies"
+
+msg_info "Creating Pixelfed User"
+useradd -rU -s /bin/bash pixelfed
+usermod -aG redis pixelfed
+msg_ok "Created Pixelfed User"
+
+
+PG_VERSION="17" setup_postgresql
+PG_DB_NAME="pixelfed" PG_DB_USER="pixelfed" setup_postgresql_db
+PHP_VERSION="8.4" PHP_FPM="YES" PHP_MODULE="bcmath,ctype,curl,exif,gd,imagick,intl,mbstring,pgsql,redis,xml,zip" PHP_UPLOAD_MAX_FILESIZE="500M" PHP_POST_MAX_SIZE="500M" PHP_MAX_EXECUTION_TIME="600" setup_php
+setup_composer
+
+msg_info "Configuring Redis"
+REDIS_PASS=$(openssl rand -base64 18 | tr -dc 'a-zA-Z0-9' | head -c13)
+sed -i "s/^# requirepass foobared/requirepass $REDIS_PASS/" /etc/redis/redis.conf
+sed -i "s/^requirepass .*/requirepass $REDIS_PASS/" /etc/redis/redis.conf
+systemctl restart redis-server
+msg_ok "Configured Redis"
+
+msg_info "Configuring PHP-FPM Pool"
+cp /etc/php/8.4/fpm/pool.d/www.conf /etc/php/8.4/fpm/pool.d/pixelfed.conf
+sed -i 's/\[www\]/[pixelfed]/' /etc/php/8.4/fpm/pool.d/pixelfed.conf
+sed -i 's/^user = www-data/user = pixelfed/' /etc/php/8.4/fpm/pool.d/pixelfed.conf
+sed -i 's/^group = www-data/group = pixelfed/' /etc/php/8.4/fpm/pool.d/pixelfed.conf
+sed -i 's|^listen = .*|listen = /run/php/php8.4-fpm-pixelfed.sock|' /etc/php/8.4/fpm/pool.d/pixelfed.conf
+sed -i 's/^listen.owner = .*/listen.owner = www-data/' /etc/php/8.4/fpm/pool.d/pixelfed.conf
+sed -i 's/^listen.group = .*/listen.group = www-data/' /etc/php/8.4/fpm/pool.d/pixelfed.conf
+systemctl restart php8.4-fpm
+msg_ok "Configured PHP-FPM Pool"
+
+fetch_and_deploy_gh_release "pixelfed" "pixelfed/pixelfed" "tarball" "latest" "/opt/pixelfed"
+
+msg_info "Installing Pixelfed (Patience)"
+cd /opt/pixelfed
+cat <<EOF >/opt/pixelfed/.env
+APP_NAME="Pixelfed"
+APP_ENV="production"
+APP_KEY=
+APP_DEBUG="false"
+APP_URL=http://${LOCAL_IP}
+APP_DOMAIN=${LOCAL_IP}
+ADMIN_DOMAIN=${LOCAL_IP}
+SESSION_DOMAIN=${LOCAL_IP}
+TRUST_PROXIES="*"
+FORCE_HTTPS_URLS="false"
+
+OPEN_REGISTRATION="false"
+ENFORCE_EMAIL_VERIFICATION="false"
+PF_MAX_USERS="1000"
+OAUTH_ENABLED="true"
+ENABLE_CONFIG_CACHE="true"
+INSTANCE_DISCOVER_PUBLIC="true"
+
+PF_OPTIMIZE_IMAGES="true"
+IMAGE_QUALITY="80"
+MAX_PHOTO_SIZE="15000"
+MAX_CAPTION_LENGTH="500"
+MAX_ALBUM_LENGTH="4"
+
+DB_CONNECTION="pgsql"
+DB_HOST="127.0.0.1"
+DB_PORT="5432"
+DB_DATABASE="${PG_DB_NAME}"
+DB_USERNAME="${PG_DB_USER}"
+DB_PASSWORD="${PG_DB_PASS}"
+
+REDIS_CLIENT="predis"
+REDIS_SCHEME="tcp"
+REDIS_HOST="127.0.0.1"
+REDIS_PASSWORD="${REDIS_PASS}"
+REDIS_PORT="6379"
+
+SESSION_DRIVER="database"
+CACHE_DRIVER="redis"
+QUEUE_DRIVER="redis"
+BROADCAST_DRIVER="log"
+LOG_CHANNEL="stack"
+HORIZON_PREFIX="horizon-"
+
+ACTIVITY_PUB="true"
+AP_REMOTE_FOLLOW="true"
+AP_INBOX="true"
+AP_OUTBOX="true"
+AP_SHAREDINBOX="true"
+
+EXP_EMC="true"
+
+MAIL_DRIVER="log"
+MAIL_HOST="smtp.mailtrap.io"
+MAIL_PORT="2525"
+MAIL_USERNAME="null"
+MAIL_PASSWORD="null"
+MAIL_ENCRYPTION="null"
+MAIL_FROM_ADDRESS="pixelfed@example.com"
+MAIL_FROM_NAME="Pixelfed"
+
+PF_ENABLE_CLOUD="false"
+FILESYSTEM_CLOUD="s3"
+SESSION_SECURE_COOKIE="false"
+HTTPS="false"
+EOF
+chmod -R 755 /opt/pixelfed
+chmod -R 775 /opt/pixelfed/storage /opt/pixelfed/bootstrap/cache
+export COMPOSER_ALLOW_SUPERUSER=1
+$STD composer install --no-dev --no-ansi --no-interaction --optimize-autoloader
+$STD php artisan key:generate --force
+$STD php artisan storage:link
+$STD php artisan migrate --force
+$STD php artisan import:cities
+$STD php artisan passport:keys
+$STD php artisan route:cache
+$STD php artisan view:cache
+$STD php artisan config:cache
+$STD php artisan instance:actor
+$STD php artisan horizon:install
+chown -R pixelfed:pixelfed /opt/pixelfed
+msg_ok "Installed Pixelfed"
+
+msg_info "Configuring Nginx"
+cat <<'EOF' >/etc/nginx/sites-available/pixelfed
+server {
+    listen 80;
+    server_name _;
+    root /opt/pixelfed/public;
+    index index.php;
+
+    charset utf-8;
+    client_max_body_size 100M;
+
+    add_header X-Frame-Options "SAMEORIGIN";
+    add_header X-XSS-Protection "1; mode=block";
+    add_header X-Content-Type-Options "nosniff";
+
+    location / {
+        try_files $uri $uri/ /index.php?$query_string;
+    }
+
+    location = /favicon.ico { access_log off; log_not_found off; }
+    location = /robots.txt  { access_log off; log_not_found off; }
+
+    error_page 404 /index.php;
+
+    location ~ \.php$ {
+        fastcgi_split_path_info ^(.+\.php)(/.+)$;
+        fastcgi_pass unix:/run/php/php8.4-fpm-pixelfed.sock;
+        fastcgi_index index.php;
+        include fastcgi_params;
+        fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
+    }
+
+    location ~ /\.(?!well-known).* {
+        deny all;
+    }
+}
+EOF
+ln -sf /etc/nginx/sites-available/pixelfed /etc/nginx/sites-enabled/pixelfed
+rm -f /etc/nginx/sites-enabled/default
+$STD nginx -t
+systemctl reload nginx
+msg_ok "Configured Nginx"
+
+msg_info "Creating Services"
+cat <<'EOF' >/etc/systemd/system/pixelfed-horizon.service
+[Unit]
+Description=Pixelfed Horizon Queue Worker
+After=network.target redis-server.service postgresql.service
+Requires=redis-server.service
+
+[Service]
+Type=simple
+User=pixelfed
+WorkingDirectory=/opt/pixelfed
+ExecStart=/usr/bin/php /opt/pixelfed/artisan horizon
+Restart=always
+RestartSec=5
+
+[Install]
+WantedBy=multi-user.target
+EOF
+
+cat <<'EOF' >/etc/systemd/system/pixelfed-scheduler.service
+[Unit]
+Description=Pixelfed Task Scheduler
+After=network.target
+
+[Service]
+Type=oneshot
+User=pixelfed
+WorkingDirectory=/opt/pixelfed
+ExecStart=/usr/bin/php /opt/pixelfed/artisan schedule:run
+EOF
+
+cat <<'EOF' >/etc/systemd/system/pixelfed-scheduler.timer
+[Unit]
+Description=Run Pixelfed Scheduler every minute
+
+[Timer]
+OnCalendar=*-*-* *:*:00
+Persistent=true
+
+[Install]
+WantedBy=timers.target
+EOF
+systemctl enable -q --now pixelfed-horizon pixelfed-scheduler.timer
+msg_ok "Created Services"
+
+
+motd_ssh
+customize
+cleanup_lxc
@@ -18,20 +18,12 @@ fetch_and_deploy_gh_release "qbittorrent" "userdocs/qbittorrent-nox-static" "sin
 msg_info "Setup qBittorrent-nox"
 mv /opt/qbittorrent/qbittorrent /opt/qbittorrent/qbittorrent-nox
 mkdir -p ~/.config/qBittorrent/
-QB_PASS=$(random_password 20)
-QB_SALT=$(random_password 16)
-QB_HASH="$(printf '%s' "$QB_SALT" | base64 -w0):$(openssl kdf -keylen 64 -kdfopt digest:SHA512 -kdfopt pass:"$QB_PASS" -kdfopt salt:"$QB_SALT" -kdfopt iter:100000 -binary PBKDF2 | base64 -w0)"
-{
-  echo "qBittorrent Credentials"
-  echo "Username: admin"
-  echo "Password: ${QB_PASS}"
-} >~/qbittorrent.creds
 cat <<EOF >~/.config/qBittorrent/qBittorrent.conf
 [LegalNotice]
 Accepted=true

 [Preferences]
-WebUI\Password_PBKDF2="@ByteArray(${QB_HASH})"
+WebUI\Password_PBKDF2="@ByteArray(amjeuVrF3xRbgzqWQmes5A==:XK3/Ra9jUmqUc4RwzCtrhrkQIcYczBl90DJw2rT8DFVTss4nxpoRhvyxhCf87ahVE3SzD8K9lyPdpyUCfmVsUg==)"
 WebUI\Port=8090
 WebUI\UseUPnP=false
 WebUI\Username=admin
@@ -43,15 +43,9 @@ $STD rabbitmqctl enable_feature_flag all
 msg_ok "Enabled RabbitMQ Management Plugin"

 msg_info "Creating User"
-RABBITMQ_PASS=$(random_password 20)
-$STD rabbitmqctl add_user proxmox "$RABBITMQ_PASS"
+$STD rabbitmqctl add_user proxmox proxmox
 $STD rabbitmqctl set_user_tags proxmox administrator
 $STD rabbitmqctl set_permissions -p / proxmox ".*" ".*" ".*"
-{
-  echo "RabbitMQ Credentials"
-  echo "Username: proxmox"
-  echo "Password: ${RABBITMQ_PASS}"
-} >~/rabbitmq.creds
 msg_ok "Created User"

 motd_ssh
@@ -257,33 +257,15 @@ map $http_upgrade $connection_upgrade {
    '' close;
 }

-# COEP/COOP for the EmulatorJS and js-dos players (SharedArrayBuffer needs a
-# crossOriginIsolated document). Matched on $request_uri because try_files
-# rewrites $uri to /index.html before add_header runs, so a per-location
-# add_header on the player route never fires. Mirrors upstream RomM's
-# docker/nginx/templates/default.conf.template.
-map $request_uri $coep_header {
-    default        "";
-    ~^/rom/.*/(ejs|jsdos)(\?|$) "require-corp";
-}
-map $request_uri $coop_header {
-    default        "";
-    ~^/rom/.*/(ejs|jsdos)(\?|$) "same-origin";
-}
-
 server {
    listen 80;
    server_name _;
    root /opt/romm/frontend/dist;
    client_max_body_size 0;

-    # Frontend SPA - also emits the player isolation headers: the player URLs
-    # fall through try_files to /index.html, which this location serves
+    # Frontend SPA
    location / {
        try_files $uri $uri/ /index.html;
-        add_header Cache-Control "no-cache";
-        add_header Cross-Origin-Embedder-Policy $coep_header;
-        add_header Cross-Origin-Opener-Policy $coop_header;
    }

    # Static assets
@@ -294,6 +276,13 @@ server {
        add_header Cache-Control "public, immutable";
    }

+    # EmulatorJS player - requires COOP/COEP headers for SharedArrayBuffer
+    location ~ ^/rom/.*/ejs$ {
+        add_header Cross-Origin-Embedder-Policy "require-corp";
+        add_header Cross-Origin-Opener-Policy "same-origin";
+        try_files $uri /index.html;
+    }
+
    # Backend API
    location /api {
        proxy_pass http://romm_backend;
@@ -151,7 +151,7 @@ INVITE_EMAIL_TEMPLATE=/opt/signoz/templates/invitation_email_template.html
 SIGNOZ_SQLSTORE_SQLITE_PATH=/var/lib/signoz/signoz.db
 SIGNOZ_WEB_ENABLED=true
 SIGNOZ_WEB_DIRECTORY=/opt/signoz/web
-SIGNOZ_JWT_SECRET=$(openssl rand -hex 32)
+SIGNOZ_JWT_SECRET=secret
 SIGNOZ_ALERTMANAGER_PROVIDER=signoz
 SIGNOZ_TELEMETRYSTORE_PROVIDER=clickhouse
 SIGNOZ_TELEMETRYSTORE_CLICKHOUSE_DSN=tcp://localhost:9000?password=
@@ -78,12 +78,6 @@ msg_info "Configuring SnapOtter"
 mkdir -p /opt/snapotter_data/files
 mkdir -p /tmp/snapotter-workspace

-SNAPOTTER_PASS=$(random_password 20)
-{
-  echo "SnapOtter Credentials"
-  echo "Username: admin"
-  echo "Password: ${SNAPOTTER_PASS}"
-} >~/snapotter.creds
 cat <<EOF >/opt/snapotter_data/.env
 PORT=1349
 NODE_ENV=production
@@ -98,7 +92,7 @@ FEATURE_MANIFEST_PATH=/opt/snapotter/docker/feature-manifest.json
 U2NET_HOME=/opt/snapotter_data/ai/models/rembg
 AUTH_ENABLED=true
 DEFAULT_USERNAME=admin
-DEFAULT_PASSWORD=${SNAPOTTER_PASS}
+DEFAULT_PASSWORD=admin
 LOG_LEVEL=info
 TRUST_PROXY=true
 FILE_MAX_AGE_HOURS=72
@@ -116,6 +116,10 @@ if [[ "$login_mode" == "true" ]]; then
 # activate Login
 DISABLE_ADDITIONAL_FEATURES=false
 SECURITY_ENABLELOGIN=true
+
+# login credentials
+SECURITY_INITIALLOGIN_USERNAME=admin
+SECURITY_INITIALLOGIN_PASSWORD=stirling
 EOF
 fi
 msg_ok "Created Environment Variables"
@@ -23,7 +23,7 @@ msg_ok "Installed Dependencies"

 NODE_VERSION="24" setup_nodejs

-fetch_and_deploy_gh_release "yuvomi" "ulsklyc/yuvomi" "prebuild" "latest" "/opt/yuvomi" "yuvomi-*-dist.tar.gz"
+fetch_and_deploy_gh_release "yuvomi" "ulsklyc/yuvomi" "tarball"

 msg_info "Installing Node.js Dependencies"
 cd /opt/yuvomi
@@ -85,16 +85,12 @@ function install() {
  mkdir -p "${HOME}/.config/code-server/"

  if [ "$preexisting_config" = false ]; then
-    CS_PASS=$(random_password 20)
    cat <<EOF >"$config_path"
 bind-addr: 0.0.0.0:8680
-auth: password
-password: ${CS_PASS}
+auth: none
+password: 
 cert: false
 EOF
-    chmod 600 "$config_path"
-    echo -e "Coder Code Server\nPassword: ${CS_PASS}" >~/coder-code-server.creds
-    chmod 600 ~/coder-code-server.creds
  fi
  systemctl enable -q --now code-server@"$USER"
  systemctl restart code-server@"$USER"
@@ -115,7 +111,7 @@ EOF
  msg_ok "Created update script (/usr/local/bin/update_coder-code-server)"

  echo -e "${APP} should be reachable by going to the following URL.
-         ${BL}http://${IP}:8680${CL} (password in ~/coder-code-server.creds)\n"
+         ${BL}http://${IP}:8680${CL} \n"
 }

 # ==============================================================================
@@ -151,9 +151,9 @@ function install() {
  else
    read -rp "${TAB}Set admin username [admin]: " admin_user
    admin_user=${admin_user:-admin}
-    read -rsp "${TAB}Set admin password [random]: " admin_pass
+    read -rsp "${TAB}Set admin password [community-scripts.org]: " admin_pass
    echo ""
-    admin_pass=${admin_pass:-$(random_password 20)}
+    admin_pass=${admin_pass:-community-scripts.org}
    msg_ok "Configured with admin user: ${admin_user}"
  fi

@@ -291,10 +291,8 @@ UPDATEEOF
  msg_ok "Storage: ${BL}${DATA_PATH}${CL}"
  msg_ok "Config: ${BL}${CONF_PATH}${CL}"
  if [[ -n "$admin_user" ]]; then
-    echo -e "Copyparty\nUsername: ${admin_user}\nPassword: ${admin_pass}" >~/copyparty.creds
-    chmod 600 ~/copyparty.creds
    echo ""
-    msg_ok "Login: ${GN}${admin_user}${CL} (password in ~/copyparty.creds)"
+    msg_ok "Login: ${GN}${admin_user}${CL} / ${GN}${admin_pass}${CL}"
  fi
 }

@@ -189,8 +189,6 @@ chown root:root /usr/local/community-scripts
 chmod 755 /usr/local/community-scripts
 msg_ok "Directory prepared"

-ADMIN_PASS=$(random_password 20)
-msg_warn "FileBrowser runs as root and shows the whole filesystem. Without authentication, anyone who reaches port ${PORT} can read and change every file."
 echo -n "${TAB}Use No Authentication? (y/N): "
 read -r noauth_prompt

@@ -236,12 +234,9 @@ server:
          - neverWatchPath: "/lost+found"
 auth:
  adminUsername: admin
-  adminPassword: ${ADMIN_PASS}
+  adminPassword: community-scripts.org
 EOF
-  chmod 600 "$CONFIG_PATH"
-  echo -e "FileBrowser Quantum\nUsername: admin\nPassword: ${ADMIN_PASS}" >~/filebrowser-quantum.creds
-  chmod 600 ~/filebrowser-quantum.creds
-  msg_ok "Configured admin (credentials saved in ~/filebrowser-quantum.creds)"
+  msg_ok "Configured with default admin (admin / community-scripts.org)"
 fi

 msg_info "Creating service"
@@ -281,13 +276,4 @@ EOF
 fi

 msg_ok "Service created successfully"
-
-# auth.adminPassword resets the password on every start, so it stays only until the admin exists
-if grep -q '^\s*adminPassword:' "$CONFIG_PATH"; then
-  for _ in {1..30}; do
-    [[ "$(curl -s -o /dev/null -w '%{http_code}' "http://127.0.0.1:${PORT}/health")" == "200" ]] && break
-    sleep 1
-  done
-  sed -i '/^\s*adminPassword:/d' "$CONFIG_PATH"
-fi
 msg_ok "${APP} is reachable at: ${BL}http://${IP}:${PORT}${CL}"
@@ -122,11 +122,9 @@ if [[ "${install_prompt,,}" =~ ^(y|yes)$ ]]; then
  chmod 755 /usr/local/community-scripts
  touch "$DB_PATH"
  chown root:root "$DB_PATH"
-  chmod 600 "$DB_PATH"
+  chmod 644 "$DB_PATH"
  msg_ok "Directory created successfully"

-  ADMIN_PASS=$(random_password 20)
-  msg_warn "FileBrowser runs as root and shows the whole filesystem. Without authentication, anyone who reaches port ${PORT} can read and change every file."
  read -r -p "Would you like to use No Authentication? (y/N): " auth_prompt
  if [[ "${auth_prompt,,}" =~ ^(y|yes)$ ]]; then
    msg_info "Configuring No Authentication"
@@ -135,18 +133,16 @@ if [[ "${install_prompt,,}" =~ ^(y|yes)$ ]]; then
    $STD filebrowser config set -a '0.0.0.0' -p "$PORT" -d "$DB_PATH"
    $STD filebrowser config set --auth.method=noauth --database "$DB_PATH"
    if ! filebrowser users update 1 --perm.admin --database "$DB_PATH" &>/dev/null; then
-      $STD filebrowser users add admin "$ADMIN_PASS" --perm.admin --database "$DB_PATH"
+      $STD filebrowser users add admin community-scripts.org --perm.admin --database "$DB_PATH"
    fi
    msg_ok "No Authentication configured"
  else
-    msg_info "Setting up authentication"
+    msg_info "Setting up default authentication"
    cd /usr/local/community-scripts
    $STD filebrowser config init -a '0.0.0.0' -p "$PORT" -d "$DB_PATH"
    $STD filebrowser config set -a '0.0.0.0' -p "$PORT" -d "$DB_PATH"
-    $STD filebrowser users add admin "$ADMIN_PASS" --perm.admin --database "$DB_PATH"
-    echo -e "FileBrowser\nUsername: admin\nPassword: ${ADMIN_PASS}" >~/filebrowser.creds
-    chmod 600 ~/filebrowser.creds
-    msg_ok "Authentication configured (credentials saved in ~/filebrowser.creds)"
+    $STD filebrowser users add admin community-scripts.org --perm.admin --database "$DB_PATH"
+    msg_ok "Default authentication configured (admin:community-scripts.org)"
  fi

  msg_info "Creating service"
@@ -160,6 +156,7 @@ After=network-online.target
 User=root
 WorkingDirectory=/usr/local/community-scripts
 ExecStartPre=/bin/touch /usr/local/community-scripts/filebrowser.db
+ExecStartPre=/usr/local/bin/filebrowser config set -a "0.0.0.0" -p ${PORT} -d /usr/local/community-scripts/filebrowser.db
 ExecStart=/usr/local/bin/filebrowser -r / -d /usr/local/community-scripts/filebrowser.db -p ${PORT}
 Restart=always

@@ -30,7 +30,6 @@ catch_errors

 # Initialize all core functions (colors, formatting, icons, STD mode)
 load_functions
-confirm_not_pve_host
 require_debian_like

 header_info
@@ -50,13 +49,9 @@ msg_ok "Installed Prerequisites"

 msg_info "Installing ${APP}"
 fetch_and_deploy_gh_release "webmin" "webmin/webmin" "binary" "latest" "/opt/webmin" "webmin_*_all.deb"
-WEBMIN_PASS=$(random_password 20)
-/usr/share/webmin/changepass.pl /etc/webmin root "$WEBMIN_PASS" &>/dev/null
-echo -e "Webmin\nUsername: root\nPassword: ${WEBMIN_PASS}" >~/webmin.creds
-chmod 600 ~/webmin.creds
+/usr/share/webmin/changepass.pl /etc/webmin root root &>/dev/null
 msg_ok "Installed ${APP}"

 get_lxc_ip
 echo -e "Successfully Installed!! ${APP} should be reachable by going to ${BL}https://${LOCAL_IP}:10000${CL}"
-echo -e "Login: root, password in ~/webmin.creds"

@@ -588,17 +588,11 @@ get_vm_ips() {
    fi
    if [[ "$agent_enabled" == "1" ]] && command -v qm >/dev/null 2>&1; then
        debug_log "vm $vmid: querying guest agent"
-        local qm_ips=$(timeout 5 qm guest cmd "$vmid" network-get-interfaces 2>/dev/null | grep -oE '([0-9]{1,3}\.){3}[0-9]{1,3}' | grep -v "127.0.0.1")
-        local qm_kept=0
+        local qm_ips=$(timeout 5 qm guest cmd "$vmid" network-get-interfaces 2>/dev/null | grep -oE '([0-9]{1,3}\.){3}[0-9]{1,3}' | grep -v "127.0.0.1" | head -3)
        for qm_ip in $qm_ips; do
            if [[ "$qm_ip" =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}$ ]]; then
-                if ip_in_cidrs "$qm_ip" "${CIDR_LIST[*]}"; then
-                    debug_log "vm $vmid: found IP $qm_ip via qm guest cmd"
-                    ips+="$qm_ip "
-                    ((++qm_kept >= 3)) && break
-                else
-                    debug_log "vm $vmid: skipping IP $qm_ip via qm guest cmd (outside CIDR_LIST)"
-                fi
+                debug_log "vm $vmid: found IP $qm_ip via qm guest cmd"
+                ips+="$qm_ip "
            fi
        done
    else
@@ -54,35 +54,35 @@ function run_lxc_clean() {
  header_info
  name=$(pct exec "$container" -- hostname)

-  pct exec "$container" -- sh -c '
+  pct exec "$container" -- bash -c '
    BL="\033[36m"; GN="\033[1;92m"; CL="\033[m"
    name=$(hostname)
    if [ -e /etc/alpine-release ]; then
-      printf "%b\n\n" "${BL}[Info]${GN} Cleaning $name (Alpine)${CL}"
+      echo -e "${BL}[Info]${GN} Cleaning $name (Alpine)${CL}\n"
      apk cache clean
      find /var/log -type f -delete 2>/dev/null
      find /tmp -mindepth 1 -delete 2>/dev/null
      apk update
    elif [ -e /etc/redhat-release ]; then
-      printf "%b\n\n" "${BL}[Info]${GN} Cleaning $name (CentOS)${CL}"
+      echo -e "${BL}[Info]${GN} Cleaning $name (CentOS)${CL}\n"
      yum clean all
      find /var/log -type f -delete 2>/dev/null
      find /tmp -mindepth 1 -delete 2>/dev/null
      yum update
      yum upgrade -y
    else
-      printf "%b\n\n" "${BL}[Info]${GN} Cleaning $name (Debian/Ubuntu)${CL}"
+      echo -e "${BL}[Info]${GN} Cleaning $name (Debian/Ubuntu)${CL}\n"
      find /var/cache -type f -delete 2>/dev/null
      find /var/log -type f -delete 2>/dev/null
      find /tmp -mindepth 1 -delete 2>/dev/null
      apt -y --purge autoremove
      apt -y autoclean
+      rm -rf /var/lib/apt/lists/*
      apt update
    fi
  '
 }

-failed_containers=()
 for container in $(pct list | awk '{if(NR>1) print $1}'); do
  excluded=0
  for ex in $excluded_containers; do
@@ -112,25 +112,17 @@ for container in $(pct list | awk '{if(NR>1) print $1}'); do

  if [ "$template" == "false" ] && [ "$status" == "status: stopped" ]; then
    echo -e "${BL}[Info]${GN} Starting${BL} $container ${CL} \n"
-    if ! pct start "$container"; then
-      failed_containers+=("$container (start)")
-      continue
-    fi
+    pct start "$container"
    echo -e "${BL}[Info]${GN} Waiting For${BL} $container${CL}${GN} To Start ${CL} \n"
    sleep 5
-    run_lxc_clean "$container" || failed_containers+=("$container")
+    run_lxc_clean "$container"
    echo -e "${BL}[Info]${GN} Shutting down${BL} $container ${CL} \n"
    pct shutdown "$container" &
  elif [ "$status" == "status: running" ]; then
-    run_lxc_clean "$container" || failed_containers+=("$container")
+    run_lxc_clean "$container"
  fi
 done

 wait
 header_info
-if [ "${#failed_containers[@]}" -gt 0 ]; then
-  echo -e "${RD}Cleaning failed in these containers:${CL}"
-  printf '%s\n' "${failed_containers[@]}"
-  exit 1
-fi
 echo -e "${GN} Finished, Selected Containers Cleaned. ${CL} \n"
@@ -282,7 +282,7 @@ function failure_reason() {
 function backup_container() {
  msg_info "Creating backup for container $1"
  local output
-  if output=$(_cs_shield_hangup vzdump $1 --compress zstd --storage $STORAGE_CHOICE -notes-template "{{guestname}} - community-scripts backup updater" 2>&1); then
+  if output=$(vzdump $1 --compress zstd --storage $STORAGE_CHOICE -notes-template "{{guestname}} - community-scripts backup updater" 2>&1); then
    msg_ok "Backup created"
  else
    log_write "Container $1: vzdump failed:"$'\n'"$output"
@@ -651,18 +651,7 @@ for container in $CHOICE; do
    msg_error "Update failed for container $container ($service, exit code: $exit_code) — attempting restore"
    log_write "Container $container ($service): FAILED (exit $exit_code) — attempting restore"
    msg_info "Restoring LXC $container from backup ($STORAGE_CHOICE)"
-    wait
-    pct stop $container &>/dev/null || true
-    for _ in {1..30}; do
-      [[ "$(pct status $container 2>/dev/null)" == "status: stopped" ]] && break
-      sleep 1
-    done
-    if [[ "$(pct status $container 2>/dev/null)" != "status: stopped" ]]; then
-      msg_error "Container $container did not stop, so it cannot be restored"
-      log_result "$container" "$service" "FAILED" "Update failed (exit $exit_code) — container did not stop for the restore"
-      log_write "Container $container ($service): FAILED — container did not stop for the restore"
-      exit 235
-    fi
+    pct stop $container
    LXC_STORAGE=$(pct config $container | awk -F '[:,]' '/rootfs/ {print $2}')
    BACKUP_ENTRY=$(pvesm list "$STORAGE_CHOICE" 2>/dev/null | awk -v ctid="$container" '$1 ~ "vzdump-lxc-"ctid"-" || $1 ~ "/ct/"ctid"/" {print $1}' | sort -r | head -n1)
    if [ -z "$BACKUP_ENTRY" ]; then
@@ -84,7 +84,6 @@ function update_container() {
 }

 containers_needing_reboot=()
-failed_containers=()
 header_info
 for container in $(pct list | awk '{if(NR>1) print $1}'); do
  if [[ " ${excluded_containers[@]} " =~ " $container " ]]; then
@@ -102,17 +101,14 @@ for container in $(pct list | awk '{if(NR>1) print $1}'); do
    template=$(pct config $container | grep -q "template:" && echo "true" || echo "false")
    if [ "$template" == "false" ] && [ "$status" == "status: stopped" ]; then
      echo -e "${BL}[Info]${GN} Starting${BL} $container ${CL} \n"
-      if ! pct start $container; then
-        failed_containers+=("$container (start)")
-        continue
-      fi
+      pct start $container
      echo -e "${BL}[Info]${GN} Waiting For${BL} $container${CL}${GN} To Start ${CL} \n"
      sleep 5
-      update_container $container || failed_containers+=("$container")
+      update_container $container
      echo -e "${BL}[Info]${GN} Shutting down${BL} $container ${CL} \n"
      pct shutdown $container &
    elif [ "$status" == "status: running" ]; then
-      update_container $container || failed_containers+=("$container")
+      update_container $container
    fi
    if [ "$status" == "status: running" ]; then
      if pct exec "$container" -- [ -e "/var/run/reboot-required" ]; then
@@ -123,20 +119,14 @@ for container in $(pct list | awk '{if(NR>1) print $1}'); do
      # check if patchmon agent is present in container and run a report if found
      if pct exec "$container" -- [ -e "/usr/local/bin/patchmon-agent" ]; then
        echo -e "${BL}[Info]${GN} patchmon-agent found in ${BL} $container ${CL}, triggering report. \n"
-        pct exec "$container" -- "/usr/local/bin/patchmon-agent" "report" || echo -e "${YW}[Warn]${CL} patchmon-agent report failed in $container\n"
+        pct exec "$container" -- "/usr/local/bin/patchmon-agent" "report"
      fi
    fi
  fi
 done
 wait
 header_info
-if [ "${#failed_containers[@]}" -gt 0 ]; then
-  echo -e "${RD}The update failed in these containers:${CL}"
-  printf '%s\n' "${failed_containers[@]}"
-  echo ""
-else
-  echo -e "${GN}The process is complete, and the containers have been successfully updated.${CL}\n"
-fi
+echo -e "${GN}The process is complete, and the containers have been successfully updated.${CL}\n"
 if [ "${#containers_needing_reboot[@]}" -gt 0 ]; then
  echo -e "${RD}The following containers require a reboot:${CL}"
  for container_name in "${containers_needing_reboot[@]}"; do
@@ -144,4 +134,3 @@ if [ "${#containers_needing_reboot[@]}" -gt 0 ]; then
  done
 fi
 echo ""
-[ "${#failed_containers[@]}" -eq 0 ] || exit 1
Author	SHA1	Message	Date
CanbiZ (MickLesk)	422fec4b0c	arm64 unknown	2026-11-07 21:04:23 +01:00
push-app-to-main[bot]	b0154bca84	Add pixelfed (ct)	2026-11-07 19:58:08 +00:00