diff --git a/CHANGELOG.md b/CHANGELOG.md
index 33f4617a1..daf66bbcd 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -1,3 +1,16 @@
+# 2.40.2
+
+Changes:
+* Since v2.40.0, we've been loading config files from the directory where the fastfetch binary is located. However, this approach may lead to loading unexpected files. For example, `fastfetch -c groups` would attempt to load `/usr/bin/groups`. Therefore, we now enforce the `.jsonc` extension when loading config files. Examples:
+    1. `-c filename`: loads `filename.jsonc`
+    2. `-c filename.jsonc`: loads `filename.jsonc`
+    3. `-c filename.json`: loads `filename.json` and enforces strict JSON syntax (no comments or trailing commas)
+    4. `-c filename.ext`: loads `filename.ext.jsonc` (`.jsonc` extension is enforced)
+
+Features:
+* Mark kitty image protocol support for warp terminal (Logo)
+* Documentation improvements
+
 # 2.40.1
 
 Bugfixes:
diff --git a/doc/fastfetch.1.in b/doc/fastfetch.1.in
index 7503b47be..43d0afa55 100644
--- a/doc/fastfetch.1.in
+++ b/doc/fastfetch.1.in
@@ -1,8 +1,7 @@
 .TH FASTFETCH 1 "@FASTFETCH_BUILD_DATE@" "@CMAKE_PROJECT_NAME@ @CMAKE_PROJECT_VERSION@"
 
 .SH NAME
-fastfetch \- a neofetch\-like tool for fetching system information and
-displaying them in a pretty way
+fastfetch \- a fast and customizable system information tool similar to neofetch
 
 .SH SYNOPSIS
 
@@ -11,15 +10,12 @@ displaying them in a pretty way
 
 .SH DESCRIPTION
 
-Fastfetch is a neofetch\-like tool for fetching system information and
-displaying them in a pretty way. It is written mainly in C, with performance
-and customizability in mind.
-Currently, Linux, Android, FreeBSD, MacOS and Windows 7+ are supported.
+Fastfetch is a tool for displaying system information in a visually appealing way. Written primarily in C, it focuses on performance and customizability while providing functionality similar to neofetch.
+It supports Linux, Android, *BSD, macOS, Haiku, and Windows 7 or newer.
 
 .SH "EXIT STATUS"
 
-On successful execution, fastfetch returns zero. If any error happened,
-the exit code will be non\-zero.
+Fastfetch returns zero on successful execution. Any errors result in a non-zero exit code.
 
 .SH OPTIONS
 
@@ -27,115 +23,200 @@ the exit code will be non\-zero.
 .TP
 
 .B \-h, \-\-help \fI[command]
-Show help output, displaying all available options or help for given command
+Display help information for all available options or for a specific command
 .TP
 
 .B \-v, \-\-version
-Show version of fastfetch
+Display the version of fastfetch
+.TP
+
+.B \-\-version\-raw
+Display the raw version string (major.minor.patch)
 .TP
 
 .B \-\-list\-config\-paths
-List search paths of config files
+List search paths for configuration files
 .TP
 
 .B \-\-list\-data\-paths
-List search paths of presets and logos
+List search paths for presets and logos
 .TP
 
 .B \-\-list\-logos
-List available logos, they can be loaded with \fI\-\-logo
+List available logos that can be loaded with \fI\-\-logo
 .TP
 
 .B \-\-list\-modules
-List available modules
+List all available modules
 .TP
 
 .B \-\-list\-presets
-List available presets, they can be loaded with \fI\-\-config
+List available presets that can be loaded with \fI\-\-config
 .TP
 
 .B \-\-list\-features
-List the supported features fastfetch was compiled with
+List the features that fastfetch was compiled with (mainly for development)
 .TP
 
 .B \-\-print\-logos
-Print available logos
+Display all available logos
 .TP
 
 .B \-\-print\-structure
-Print the default structure
+Display the default structure
 .TP
 
 .B \-\-format \fI<type>
-Set the output format. Besides the
-.I default
-format, only
-.I json
-is supported currently.
-
-
-.SS "Display Options"
-.TP
-
-.B \-l, \-\-logo \fI<logo>
-Set the logo to display
-.TP
-
-.B \-s, \-\-structure \fI<structure>
-Set the structure of the fetch. For details about the structure,
-see the CONFIGURATION section.
-
+Set the output format. Available options are:
+.RS
+.IP \(bu 2
+\fIdefault\fR: Standard human-readable format
+.IP \(bu 2
+\fIjson\fR: JSON format for machine processing
+.RE
 
 .SS "Config Options"
 .TP
 
 .B \-c, \-\-config \fI<config>
-Use the specified config file or preset. If
-.I none
-is specified, disable further config loading. For details about
-config files, see the CONFIGURATION section
+Use the specified config file or preset. Specify \fInone\fR to disable further config loading. See the CONFIGURATION section for details on config files.
 .TP
 
-.B \-\-gen\-config \fI[file]
-Generate a config file with options specified on the command line.
-If \fIfile\fR is specified, the configuration will be written to the
-file, otherwise it will be written to stdout.
+.B \-\-gen\-config \fI[path]
+Generate a config file with options specified on the command line. If \fIpath\fR is not specified, it defaults to \fB~/.config/fastfetch/config.jsonc\fR. If \fIpath\fR is "\-", the configuration will be written to stdout.
 .TP
 
-.B \-\-gen\-config\-force \fI[file]
-Same as \fB\-\-gen\-config\fR, but overwrites existing config
+.B \-\-gen\-config\-force \fI[path]
+Same as \fB\-\-gen\-config\fR, but overwrites any existing file at the destination path.
 .TP
 
+.SS "Logo Options"
+.TP
 
-To list all options, use \fB\-\-help\fR. It will also print all available module options.
+.B \-l, \-\-logo \fI<logo>
+Set the logo to display. Can be the name of a built-in logo or a path to an image file. Use \fInone\fR to disable the logo.
+.TP
+
+.B \-\-logo\-type \fI<type>
+Set the type of the logo specified with \fI\-\-logo\fR. Available types include \fIauto\fR, \fIbuiltin\fR, \fIfile\fR, \fIsixel\fR, \fIkitty\fR, and others. See \fB\-\-help logo\-type\fR for details.
+.TP
+
+.B \-\-logo\-width \fI<width>
+Set the width of the logo in characters (for image logos)
+.TP
+
+.B \-\-logo\-height \fI<height>
+Set the height of the logo in characters (for image logos)
+.TP
+
+.B \-\-logo\-color\-[1\-9] \fI<color>
+Override specific colors in the logo
+
+.SS "Display Options"
+.TP
+
+.B \-s, \-\-structure \fI<structure>
+Set the structure of the fetch (a colon-separated list of module names)
+.TP
+
+.B \-\-color \fI<color>
+Set the color of keys and title. See \fB\-\-help color\fR for available colors.
+.TP
+
+.B \-\-color\-keys \fI<color>
+Set the color of keys only
+.TP
+
+.B \-\-color\-title \fI<color>
+Set the color of the title only
+.TP
+
+.B \-\-separator \fI<string>
+Set the separator between key and value (default: ": ")
+.TP
+
+.B \-\-key\-width \fI<num>
+Align the width of keys to \fI<num>\fR characters
+.TP
+
+.B \-\-show\-errors
+Display errors when they occur (default: false)
+.TP
+
+.B \-\-pipe
+Disable colors (automatically detected based on whether stdout is a terminal)
+
+To list all available options including module-specific options, use \fB\-\-help\fR.
 
 .SH CONFIGURATION
 .SS "Fetch Structure"
-The structure of a fetch describes the modules that should be included in
-the output. It consists of a string of modules, separated by a colon (:).
+The structure defines which modules to display and in what order. It consists of module names separated by colons (:).
+For example: \fBtitle:separator:os:kernel:uptime\fR
+
 To list all available modules, use \fB\-\-list\-modules\fR
 
 .SS "Config Files"
 
-Fastfetch uses JSONC based format for configuration. Fastfetch doesn't generate
-config file automatically; it should be generated manually by \fB\-\-gen\-config\fR.
-The config file will be saved in \fB~/.config/fastfetch/config.jsonc\fR by default.
+Fastfetch uses JSONC for configuration files. JSONC is JSON with support for comments (// and /* */). Configuration files must have the .jsonc extension.
 
-A JSONC config file is a JSON file that also supports comments with (// and /* */).
-Those files must have the extension '.jsonc'.
+You can generate a default config file using \fB\-\-gen\-config\fR. By default, the config file is saved at \fB~/.config/fastfetch/config.jsonc\fR.
 
-The specified configuration/preset files are searched in the following order:
+The configuration/preset files are searched in the following locations (in order):
 
-1. relative to the current working directory
+.RS
+.IP 1. 4
+Relative to the current working directory
+.IP 2. 4
+Relative to ~/.local/share/fastfetch/presets/
+.IP 3. 4
+Relative to /usr/share/fastfetch/presets/
+.RE
 
-2. relative to ~/.local/share/fastfetch/presets/
+For detailed information on logo options, module configuration, and formatting, visit:
+.RS
+\fIhttps://github.com/fastfetch-cli/fastfetch/wiki/Configuration\fR
+.RE
 
-3. relative to /usr/share/fastfetch/presets/
+Fastfetch provides several built-in presets. List them with \fB\-\-list\-presets\fR.
 
-Fastfetch provides some default presets. List them with \fB\-\-list\-presets\fR.
+.SS "JSON Schema"
+A JSON schema is available for editor intelligence when editing the configuration file. Add the following line at the beginning of your config file:
+.PP
+\fB"$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json"\fR
+
+.SH EXAMPLES
+.TP
+Basic usage:
+.RS
+\fBfastfetch\fR
+.RE
+.TP
+Use a specific logo:
+.RS
+\fBfastfetch \-\-logo arch\fR
+.RE
+.TP
+Custom structure:
+.RS
+\fBfastfetch \-\-structure title:os:kernel:uptime:memory\fR
+.RE
+.TP
+Generate a config file:
+.RS
+\fBfastfetch \-\-gen\-config\fR
+.RE
+.TP
+Use a preset:
+.RS
+\fBfastfetch \-\-config neofetch\fR
+.RE
 
 .SH "SEE ALSO"
 .BR neofetch (1)
 
 .SH BUGS
 Please report bugs to: \fIhttps://github.com/fastfetch\-cli/fastfetch/issues\fR
+
+.SH AUTHORS
+Fastfetch is developed by a team of contributors on GitHub.
+Visit \fIhttps://github.com/fastfetch-cli/fastfetch\fR for more information.
diff --git a/doc/json_schema.json b/doc/json_schema.json
index eaf5f4c06..afd57cdb2 100644
--- a/doc/json_schema.json
+++ b/doc/json_schema.json
@@ -35,14 +35,14 @@
             "oneOf": [
                 {
                     "type": "number",
-                    "description": "1 for percentage number, 2 for multi-color bar, 3 for both, 6 for bar only, 9 for colored number, 10 for monochrome bar",
+                    "description": "0 to use global setting, 1 for percentage number, 2 for multi-color bar, 3 for both, 6 for bar only, 9 for colored number, 10 for monochrome bar",
                     "minimum": 0,
                     "maximum": 255,
                     "default": 9
                 },
                 {
                     "type": "array",
-                    "description": "array of string flags",
+                    "description": "Array of string flags",
                     "items": {
                         "enum": [
                             "num",
@@ -60,7 +60,7 @@
             ]
         },
         "percent": {
-            "description": "Threshold of percentage colors",
+            "description": "Thresholds for percentage colors",
             "type": "object",
             "additionalProperties": false,
             "properties": {
@@ -68,13 +68,13 @@
                     "type": "integer",
                     "minimum": 0,
                     "maximum": 100,
-                    "description": "Value less then green will be shown in green"
+                    "description": "Values less than green will be shown in green"
                 },
                 "yellow": {
                     "type": "integer",
                     "minimum": 0,
                     "maximum": 100,
-                    "description": "Value greater than green and less then yellow will be shown in yellow.\nValue greater than yellow will be shown in red"
+                    "description": "Values greater than green and less than yellow will be shown in yellow.\nValues greater than yellow will be shown in red"
                 },
                 "type": {
                     "$ref": "#/$defs/percentType"
@@ -96,13 +96,13 @@
                             "type": "integer",
                             "minimum": 0,
                             "maximum": 100,
-                            "description": "Value (in celsius) less then green will be shown in green"
+                            "description": "Values (in celsius) less than green will be shown in green"
                         },
                         "yellow": {
                             "type": "integer",
                             "minimum": 0,
                             "maximum": 100,
-                            "description": "Value (in celsius) greater than green and less then yellow will be shown in yellow.\nValue greater than yellow will be shown in red"
+                            "description": "Values (in celsius) greater than green and less than yellow will be shown in yellow.\nValues greater than yellow will be shown in red"
                         }
                     }
                 }
@@ -131,11 +131,11 @@
             "type": "string"
         },
         "bootmgrFormat": {
-            "description": "Output format of the module `Bootmgr`. See `-h format` for formatting syntax\n    1. {name}: Name / description\n    2. {firmware-path}: Firmware file path\n    3. {firmware-name}: Firmware file name\n    4. {secure-boot}: Is secure boot enabled",
+            "description": "Output format of the module `Bootmgr`. See `-h format` for formatting syntax\n    1. {name}: Name / description\n    2. {firmware-path}: Firmware file path\n    3. {firmware-name}: Firmware file name\n    4. {secure-boot}: Is secure boot enabled\n    5. {order}: Boot order",
             "type": "string"
         },
         "brightnessFormat": {
-            "description": "Output format of the module `Brightness`. See `-h format` for formatting syntax\n    1. {percentage}: Screen brightness (percentage num)\n    2. {name}: Screen name\n    3. {max}: Maximum brightness value\n    4. {min}: Minimum brightness value\n    5. {current}: Current brightness value\n    6. {percentage-bar}: Screen brightness (percentage bar)",
+            "description": "Output format of the module `Brightness`. See `-h format` for formatting syntax\n    1. {percentage}: Screen brightness (percentage num)\n    2. {name}: Screen name\n    3. {max}: Maximum brightness value\n    4. {min}: Minimum brightness value\n    5. {current}: Current brightness value\n    6. {percentage-bar}: Screen brightness (percentage bar)\n    7. {is-builtin}: Is built-in screen",
             "type": "string"
         },
         "btrfsFormat": {
@@ -207,7 +207,7 @@
             "type": "string"
         },
         "gpuFormat": {
-            "description": "Output format of the module `GPU`. See `-h format` for formatting syntax\n    1. {vendor}: GPU vendor\n    2. {name}: GPU name\n    3. {driver}: GPU driver\n    4. {temperature}: GPU temperature\n    5. {core-count}: GPU core count\n    6. {type}: GPU type\n    7. {dedicated-total}: GPU total dedicated memory\n    8. {dedicated-used}: GPU used dedicated memory\n    9. {shared-total}: GPU total shared memory\n    10. {shared-used}: GPU used shared memory\n    11. {platform-api}: The platform API used when detecting the GPU\n    12. {frequency}: Current frequency in GHz\n    13. {index}: GPU vendor specific index\n    14. {dedicated-percentage-num}: Dedicated memory usage percentage num\n    15. {dedicated-percentage-bar}: Dedicated memory usage percentage bar\n    16. {shared-percentage-num}: Shared memory usage percentage num\n    17. {shared-percentage-bar}: Shared memory usage percentage bar\n    18. {core-usage-num}: Core usage percentage num (supports Nvidia & Apple GPU only)\n    19. {core-usage-bar}: Core usage percentage bar (supports Nvidia & Apple GPU only)",
+            "description": "Output format of the module `GPU`. See `-h format` for formatting syntax\n    1. {vendor}: GPU vendor\n    2. {name}: GPU name\n    3. {driver}: GPU driver\n    4. {temperature}: GPU temperature\n    5. {core-count}: GPU core count\n    6. {type}: GPU type\n    7. {dedicated-total}: GPU total dedicated memory\n    8. {dedicated-used}: GPU used dedicated memory\n    9. {shared-total}: GPU total shared memory\n    10. {shared-used}: GPU used shared memory\n    11. {platform-api}: The platform API used when detecting the GPU\n    12. {frequency}: Current frequency in GHz\n    13. {index}: GPU vendor specific index\n    14. {dedicated-percentage-num}: Dedicated memory usage percentage num\n    15. {dedicated-percentage-bar}: Dedicated memory usage percentage bar\n    16. {shared-percentage-num}: Shared memory usage percentage num\n    17. {shared-percentage-bar}: Shared memory usage percentage bar\n    18. {core-usage-num}: Core usage percentage num\n    19. {core-usage-bar}: Core usage percentage bar\n    20. {memory-type}: Memory type (Windows only)",
             "type": "string"
         },
         "hostFormat": {
@@ -394,7 +394,7 @@
     "type": "object",
     "additionalProperties": false,
     "title": "JSON config",
-    "description": "JSON config file for fastfetch. Usually be `~/.config/fastfetch.jsonc`",
+    "description": "JSON config file for fastfetch. Usually located at `~/.config/fastfetch/config.jsonc`",
     "properties": {
         "$schema": {
             "type": "string",
@@ -420,7 +420,7 @@
                     "additionalProperties": false,
                     "properties": {
                         "type": {
-                            "description": "Set the type of the logo given",
+                            "description": "Set the type of the logo",
                             "enum": [
                                 "auto",
                                 "builtin",
@@ -447,7 +447,7 @@
                         "color": {
                             "type": "object",
                             "additionalProperties": false,
-                            "description": "Overwrite a color in the logo",
+                            "description": "Override colors in the logo",
                             "properties": {
                                 "1": {
                                     "description": "Color 1",
@@ -521,12 +521,12 @@
                         },
                         "printRemaining": {
                             "type": "boolean",
-                            "description": "Whether to print the remaining logo, if it has more lines than modules to display",
-                            "default": false
+                            "description": "Whether to print the remaining logo if it has more lines than modules to display",
+                            "default": true
                         },
                         "preserveAspectRatio": {
                             "type": "boolean",
-                            "description": "Whether to preserve the aspect ratio of the logo. Supported by iTerm image protocol",
+                            "description": "Whether to preserve the aspect ratio of the logo. Supported by iTerm image protocol only",
                             "default": false
                         },
                         "recache": {
@@ -536,7 +536,7 @@
                         },
                         "position": {
                             "type": "string",
-                            "description": "Set the position of the logo should be displayed",
+                            "description": "Set the position where the logo should be displayed",
                             "enum": [
                                 "left",
                                 "top",
@@ -547,7 +547,7 @@
                         "chafa": {
                             "type": "object",
                             "additionalProperties": false,
-                            "description": "Chafa configuration. See chafa document for details",
+                            "description": "Chafa configuration. See chafa documentation for details",
                             "properties": {
                                 "fgOnly": {
                                     "type": "boolean",
@@ -560,7 +560,7 @@
                                 },
                                 "canvasMode": {
                                     "type": "string",
-                                    "description": "Determine how colors are used in the output. This value maps the value of enum ChafaCanvasMode.",
+                                    "description": "Determine how colors are used in the output. This value maps to enum ChafaCanvasMode.",
                                     "enum": [
                                         "TRUECOLOR",
                                         "INDEXED_256",
@@ -574,7 +574,7 @@
                                 },
                                 "colorSpace": {
                                     "type": "string",
-                                    "description": "Set color space used for quantization. This value maps the value of enum ChafaColorSpace.",
+                                    "description": "Set color space used for quantization. This value maps to enum ChafaColorSpace.",
                                     "enum": [
                                         "RGB",
                                         "DIN99D"
@@ -582,7 +582,7 @@
                                 },
                                 "ditherMode": {
                                     "type": "string",
-                                    "description": "Set output dither mode (No effect with 24-bit color). This value maps the value of enum ChafaDitherMode.",
+                                    "description": "Set output dither mode (No effect with 24-bit color). This value maps to enum ChafaDitherMode.",
                                     "enum": [
                                         "NONE",
                                         "ORDERED",
@@ -600,14 +600,9 @@
             "type": "object",
             "additionalProperties": false,
             "properties": {
-                "multithreading": {
-                    "type": "boolean",
-                    "description": "Use multiple threads to detect values",
-                    "default": true
-                },
                 "thread": {
                     "type": "boolean",
-                    "description": "Alias of multithreading",
+                    "description": "Use separate threads for HTTP requests",
                     "default": true
                 },
                 "escapeBedrock": {
@@ -617,7 +612,7 @@
                 },
                 "playerName": {
                     "type": "string",
-                    "description": "The name of the player to use for module Media and Player. Linux only"
+                    "description": "The name of the player to use for Media and Player modules. Linux only"
                 },
                 "dsForceDrm": {
                     "description": "Force display detection to use DRM. Linux only",
@@ -629,13 +624,13 @@
                         },
                         {
                             "type": "string",
-                            "description": "Use `/sys/class/drm` only.",
+                            "description": "Use `/sys/class/drm` only",
                             "const": "sysfs-only"
                         },
                         {
                             "type": "boolean",
                             "const": true,
-                            "description": "Try `libdrm` first, then `sysfs` if libdrm failed"
+                            "description": "Try `libdrm` first, then `sysfs` if libdrm fails"
                         }
                     ],
                     "default": false
@@ -663,7 +658,7 @@
             }
         },
         "display": {
-            "description": "Configure how things to be displayed",
+            "description": "Configure how things should be displayed",
             "type": "object",
             "additionalProperties": false,
             "properties": {
@@ -682,7 +677,7 @@
                 },
                 "pipe": {
                     "type": "boolean",
-                    "description": "Whether to enable pipe mode (disable logo and all escape sequences)",
+                    "description": "Whether to disable colors (auto-detected based on isatty(1) by default)",
                     "default": false
                 },
                 "showErrors": {
@@ -692,12 +687,12 @@
                 },
                 "disableLinewrap": {
                     "type": "boolean",
-                    "description": "Whether to disable line wrap during the run",
+                    "description": "Whether to disable line wrap during execution",
                     "default": true
                 },
                 "hideCursor": {
                     "type": "boolean",
-                    "description": "Whether to hide the cursor during the run",
+                    "description": "Whether to hide the cursor during execution",
                     "default": true
                 },
                 "separator": {
@@ -709,7 +704,7 @@
                     "description": "Set the color of the keys and title",
                     "oneOf": [
                         {
-                            "description": "Set the both color of the keys and title",
+                            "description": "Set both the colors of keys and title",
                             "$ref": "#/$defs/colors"
                         },
                         {
@@ -774,11 +769,11 @@
                 "size": {
                     "type": "object",
                     "additionalProperties": false,
-                    "description": "Set how a size value should be displayed",
+                    "description": "Set how size values should be displayed",
                     "properties": {
                         "binaryPrefix": {
                             "type": "string",
-                            "description": "Set the binary prefix to used when formatting sizes",
+                            "description": "Set the binary prefix to use when formatting sizes",
                             "oneOf": [
                                 {
                                     "const": "iec",
@@ -792,7 +787,8 @@
                                     "const": "jedec",
                                     "description": "1024 Bytes = 1 KB, 1024 KB = 1 MB, ..."
                                 }
-                            ]
+                            ],
+                            "default": "iec"
                         },
                         "maxPrefix": {
                             "type": "string",
@@ -816,7 +812,7 @@
                     "properties": {
                         "unit": {
                             "type": "string",
-                            "description": "Set the unit of the temperature",
+                            "description": "Set the unit of temperature",
                             "enum": ["D", "Default", "Celsius", "C", "Fahrenheit", "F", "Kelvin", "K"],
                             "default": "D"
                         },
@@ -830,19 +826,22 @@
                         "color": {
                             "type": "object",
                             "additionalProperties": false,
-                            "description": "Set color used in different states of temperature values",
+                            "description": "Set colors used in different states of temperature values",
                             "properties": {
                                 "green": {
                                     "description": "Color used in green state",
-                                    "$ref": "#/$defs/colors"
+                                    "$ref": "#/$defs/colors",
+                                    "default": "green"
                                 },
                                 "yellow": {
                                     "description": "Color used in yellow state",
-                                    "$ref": "#/$defs/colors"
+                                    "$ref": "#/$defs/colors",
+                                    "default": "light_yellow"
                                 },
                                 "red": {
                                     "description": "Color used in red state",
-                                    "$ref": "#/$defs/colors"
+                                    "$ref": "#/$defs/colors",
+                                    "default": "light_red"
                                 }
                             }
                         }
@@ -884,7 +883,7 @@
                 "percent": {
                     "type": "object",
                     "additionalProperties": false,
-                    "description": "Set how a percentage value should be displayed",
+                    "description": "Set how percentage values should be displayed",
                     "properties": {
                         "type": {
                             "$ref": "#/$defs/percentType"
@@ -899,19 +898,22 @@
                         "color": {
                             "type": "object",
                             "additionalProperties": false,
-                            "description": "Set color used in different states of percentage bars and numbers",
+                            "description": "Set colors used in different states of percentage bars and numbers",
                             "properties": {
                                 "green": {
                                     "description": "Color used in green state",
-                                    "$ref": "#/$defs/colors"
+                                    "$ref": "#/$defs/colors",
+                                    "default": "green"
                                 },
                                 "yellow": {
                                     "description": "Color used in yellow state",
-                                    "$ref": "#/$defs/colors"
+                                    "$ref": "#/$defs/colors",
+                                    "default": "light_yellow"
                                 },
                                 "red": {
                                     "description": "Color used in red state",
-                                    "$ref": "#/$defs/colors"
+                                    "$ref": "#/$defs/colors",
+                                    "default": "light_red"
                                 }
                             }
                         }
@@ -924,7 +926,7 @@
                     "properties": {
                         "ndigits": {
                             "type": "integer",
-                            "description": "Set the number of digits to keep after the decimal point when formatting frequency values\nA positive value will show the frequency in GHz of decimal\n-1 will show the frequency in MHz",
+                            "description": "Set the number of digits to keep after the decimal point when formatting frequency values\nA positive value will show the frequency in GHz with decimal\n-1 will show the frequency in MHz",
                             "minimum": -1,
                             "maximum": 9,
                             "default": 2
diff --git a/scripts/gen-man.py b/scripts/gen-man.py
index 14d725cfd..98156d8bd 100755
--- a/scripts/gen-man.py
+++ b/scripts/gen-man.py
@@ -1,11 +1,15 @@
 #!/usr/bin/env python3
 
 """
-Python script to generate a man page for the command `fastfetch`.
-The man content will be printed to stdout so you will need to
-pipe it to a file if you want to save it.
-The command options will be generated using a JSON file.
-For the format of the JSON file, see https://github.com/fastfetch-cli/fastfetch/blob/dev/src/data/help.json
+Python script to generate a comprehensive man page for the command `fastfetch`.
+
+The generated man page content will be printed to stdout,
+so you will need to pipe it to a file if you want to save it.
+Example: python3 gen-man.py > fastfetch.1
+
+The command options are generated using a JSON file.
+For the JSON file format, see:
+https://github.com/fastfetch-cli/fastfetch/blob/dev/src/data/help.json
 """
 
 from json import load
@@ -33,7 +37,7 @@ pathToHelpFile = path.join(pathToCurrentDir, "../src/data/help.json")
 # man page section
 manSection = 1
 # title (center header)
-titlePage = "Fastfetch man page"
+titlePage = "FASTFETCH"
 # date (center footer)
 # format : "Month (abbreviation) Day Year"
 todayDate = datetime.fromtimestamp(
@@ -47,81 +51,118 @@ pathToVersionFile = path.join(pathToCurrentDir, "../CMakeLists.txt")
 ###### Sections Text ######
 
 # text displayed in the "NAME" section
-nameSection = r"fastfetch \- A maintained, feature\-rich and performance oriented, neofetch like system information tool"
+nameSection = r"fastfetch \- A fast and feature-rich system information tool similar to neofetch"
+
+# text displayed in the "DESCRIPTION" section
+descriptionSection = r"""
+Fastfetch is a tool for displaying system information in a visually appealing way. Written primarily in C, it focuses on performance and customizability while providing functionality similar to neofetch.
+It supports Linux, Android, FreeBSD, macOS, and Windows 7 or newer.
+"""
 
 # text displayed at the beginning of the "OPTIONS" section
 optionSection = r"""
-Parsing is not case sensitive. E.g. \fB--logo-type\fR is
-equal to \fB--LOGO-TYPE\fR.
+Options are parsed in a case-insensitive manner. For example, \fB--logo-type\fR and \fB--LOGO-TYPE\fR are treated identically.
 
-If a value is between square brackets, it is optional.
-An optional boolean value defaults to true if not specified.
+Arguments in square brackets are optional. Optional boolean arguments default to 'true' when specified without a value.
 
-More detailed help messages for each options can be printed
-with \fB-h <option_without_dash_prefix>\fR.
+For more detailed information about a specific option, use:
+\fBfastfetch -h <option_name_without_dashes>\fR
 
-All options can be made permanent with command
-\fBfastfetch <options> --gen-config\fR.
+Any combination of options can be made permanent by generating a configuration file:
+\fBfastfetch <options> --gen-config\fR
 """
 
 # text displayed in the "CONFIGURATION"
 configurationSection = f"""
 .SS Fetch Structure
 
-The structure of a fetch describes the modules that should
-be included in the output. It consists of a string of modules,
-separated by a colon (:). To list all available modules,
-use --list-modules.
+The structure defines which modules to display and in what order. It consists of module names separated by colons (:).
+For example: {startBold}title:separator:os:kernel:uptime{endBold}
+
+To list all available modules, use {startBold}--list-modules{endBold}
 
 
 .SS Config Files
 
-Fastfetch uses JSONC based format for configuration.
-Fastfetch doesn't generate config file automatically;
-it should be generated manually by {startBold}--gen-config{endBold}.
-The config file will be saved in
-{startBold}~/.config/fastfetch/config.jsonc{endBold} by default.
+Fastfetch uses JSONC (JSON with Comments) for configuration files. These files must have the .jsonc extension.
 
-A JSONC config file is a JSON file that also supports comments
-with (// and /* */). Those files must have the extension '.jsonc'.
+You can generate a default config file using {startBold}--gen-config{endBold}. By default, the config file is saved at {startBold}~/.config/fastfetch/config.jsonc{endBold}.
 
-The specified configuration/preset files are searched in the following order:
+The configuration/preset files are searched in the following locations (in order):
 
-{startBold}1.{endBold} relative to the current working directory
+{startBold}1.{endBold} Relative to the current working directory
 
-{startBold}2.{endBold} relative to ~/.local/share/fastfetch/presets/
+{startBold}2.{endBold} Relative to ~/.local/share/fastfetch/presets/
 
-{startBold}3.{endBold} relative to /usr/share/fastfetch/presets/
+{startBold}3.{endBold} Relative to /usr/share/fastfetch/presets/
 
-Fastfetch provides some default presets. List them with --list-presets.
+For detailed information on logo options, module configuration, and formatting, visit:
+{startBold}https://github.com/fastfetch-cli/fastfetch/wiki/Configuration{endBold}
+
+Fastfetch provides several built-in presets. List them with {startBold}--list-presets{endBold}.
+
+.SS JSON Schema
+A JSON schema is available for editor intelligence when editing the configuration file. Add the following line at the beginning of your config file:
+
+{startBold}"$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json"{endBold}
 """
 
 # text displayed in the "EXAMPLE" section
-exampleSection = """
-.SS Config files:
+exampleSection = f"""
+.SS Basic Usage
+{startBold}fastfetch{endBold}
+
+.SS Use a specific logo
+{startBold}fastfetch --logo arch{endBold}
+
+.SS Custom structure
+{startBold}fastfetch --structure title:os:kernel:uptime:memory{endBold}
+
+.SS Generate a config file
+{startBold}fastfetch --gen-config{endBold}
+
+.SS Use a preset
+{startBold}fastfetch --config neofetch{endBold}
+
+.SS Config File Example
 .nf
 // ~/.config/fastfetch/config.jsonc
-{
+{{
     "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
+    "logo": {{
+        "type": "auto",
+        "source": "arch"
+    }},
+    "display": {{
+        "separator": ": ",
+        "color": {{
+            "keys": "blue",
+            "title": "red"
+        }},
+        "key": {{
+            "width": 12
+        }}
+    }},
     "modules": [
         "title",
         "separator",
-        "module1",
-        {
-            "type": "module2",
-            "module2-option": "value"
-        }
+        "os",
+        "kernel",
+        "uptime",
+        {{
+            "type": "memory",
+            "format": "{{used}}/{{total}} ({{used_percent}}%)"
+        }}
     ]
-}
+}}
 .fi
 """
 
 # text displayed in the "BUGS" section
-bugSection = "Please report bugs to : \
-https://github.com/fastfetch-cli/fastfetch/issues"
+bugSection = "Please report bugs to: https://github.com/fastfetch-cli/fastfetch/issues"
 
-# text displayed in the "WIKI" section
-wikiSection = "Fastfetch github wiki : https://github.com/fastfetch-cli/fastfetch/wiki/Configuration"
+# text displayed in the "AUTHORS" section
+authorsSection = "Fastfetch is developed by a team of contributors on GitHub.\nVisit https://github.com/fastfetch-cli/fastfetch for more information."
 
 
 ###### Argument decoration ######
@@ -130,7 +171,7 @@ wikiSection = "Fastfetch github wiki : https://github.com/fastfetch-cli/fastfetc
 
 # if an optional argument is displayed as [?optArg] (with "optArg" underlined)
 # this value should be f"[?{startUnderline}"
-startOptionalArgument = f"[{startUnderline}?"
+startOptionalArgument = f"[{startUnderline}"
 # if an optional argument is displayed as [?optArg] (with "optArg underlined")
 # this value should be f"{endUnderline}]"
 endOptionalArgument = f"{endUnderline}]"
@@ -161,7 +202,7 @@ def main():
         for line in versionFile:
             researchVersion = search(r"^\s*VERSION (\d+\.\d+\.\d+)$", line)
             if (researchVersion):
-                print(f"\"{researchVersion.group(1)}\"", end=" ")
+                print(f"\"Fastfetch {researchVersion.group(1)}\"", end=" ")
                 break
 
     print(f"\"{titlePage}\"")
@@ -177,13 +218,13 @@ def main():
 
     print(".SH SYNOPSIS")
     print(".B fastfetch")
-    print(f"[{startUnderline}OPTIONS{endUnderline}]")\
+    print(f"[{startUnderline}OPTIONS{endUnderline}...]")
 
 
-    ###### Wiki ######
+    ###### Description ######
 
-    print(".SH WIKI")
-    print(wikiSection)
+    print(".SH DESCRIPTION")
+    print(descriptionSection)
 
 
     ###### Configuration ######
@@ -202,7 +243,7 @@ def main():
     for key, value in helpFileData.items():
 
         # print new subsection
-        print(f".SS {key}:")
+        print(f".SS {key}")
 
         # loop through every option in a section
         for option in value:
@@ -237,7 +278,29 @@ def main():
                     print(startMandatoryArgument + option['arg']['type'] + endMandatoryArgument, end="")
 
             # description
-            print(f"\n {option['desc']} \n")
+            print()
+
+            # If desc is a list, join with newlines and proper spacing
+            if isinstance(option['desc'], list):
+                desc_text = "\n ".join(option['desc'])
+                print(f" {desc_text}")
+            else:
+                print(f" {option['desc']}")
+
+            # Add remarks if available
+            if "remark" in keyList:
+                print()
+                if isinstance(option['remark'], list):
+                    for remark in option['remark']:
+                        print(f" {remark}")
+                else:
+                    print(f" {option['remark']}")
+
+            # Add default value if available
+            if "arg" in keyList and "default" in option["arg"]:
+                print(f" Default: {option['arg']['default']}")
+
+            print()
 
 
     ###### Examples ######
@@ -246,12 +309,22 @@ def main():
     print(exampleSection)
 
 
+    ###### See Also ######
+
+    print(".SH \"SEE ALSO\"")
+    print(".BR neofetch (1)")
+
+
     ###### Bugs ######
 
     print(".SH BUGS")
     print(bugSection)
 
 
+    ###### Authors ######
+
+    print(".SH AUTHORS")
+    print(authorsSection)
 
 
 if __name__ == "__main__":
diff --git a/src/data/help.json b/src/data/help.json
index ed422f656..ffaa20611 100644
--- a/src/data/help.json
+++ b/src/data/help.json
@@ -3,7 +3,7 @@
         {
             "short": "h",
             "long": "help",
-            "desc": "Show this message, or help for a specific command",
+            "desc": "Display this help message or help for a specific command",
             "arg": {
                 "type": "command",
                 "optional": true
@@ -16,15 +16,15 @@
         },
         {
             "long": "version-raw",
-            "desc": "Show the raw version string (major.minor.patch)"
+            "desc": "Display the raw version string (major.minor.patch)"
         },
         {
             "long": "list-config-paths",
-            "desc": "List search paths of config files"
+            "desc": "List search paths for config files"
         },
         {
             "long": "list-data-paths",
-            "desc": "List search paths of presets and logos"
+            "desc": "List search paths for presets and logos"
         },
         {
             "long": "list-logos",
@@ -36,21 +36,21 @@
         },
         {
             "long": "list-presets",
-            "desc": "List presets fastfetch knows about",
+            "desc": "List presets that fastfetch knows about",
             "remark": "Presets can be loaded with \"--config <preset-name>\""
         },
         {
             "long": "list-features",
-            "desc": "List the supported features fastfetch was compiled with",
+            "desc": "List the supported features that fastfetch was compiled with",
             "remark": "Mainly for development"
         },
         {
             "long": "print-logos",
-            "desc": "Print available logos"
+            "desc": "Display available logos"
         },
         {
             "long": "print-structure",
-            "desc": "Print the default structure"
+            "desc": "Display the default structure"
         },
         {
             "long": "format",
@@ -69,16 +69,16 @@
         {
             "short": "c",
             "long": "config",
-            "desc": "Specify the config file or preset to be loaded",
-            "remark": "The file will be searched in the order of \"fastfetch --list-config-paths\". If \"none\", disable further config loading. See also https://github.com/fastfetch-cli/fastfetch/wiki/Configuration for more info",
+            "desc": "Specify the config file or preset to load",
+            "remark": "The file will be searched according to the order shown by \"fastfetch --list-config-paths\". Use \"none\" to disable further config loading. See also https://github.com/fastfetch-cli/fastfetch/wiki/Configuration for more info",
             "arg": {
                 "type": "config"
             }
         },
         {
             "long": "gen-config",
-            "desc": "Generate a config file to specified path with options specified in the command line (if any)",
-            "remark": "Defaults to \"~/.config/fastfetch/config.jsonc\". Will Print the generated config if <path> is \"-\"",
+            "desc": "Generate a config file at the specified path with options from the command line (if any)",
+            "remark": "Defaults to \"~/.config/fastfetch/config.jsonc\". Will print the generated config if <path> is \"-\"",
             "arg": {
                 "type": "path",
                 "optional": true
@@ -86,7 +86,7 @@
         },
         {
             "long": "gen-config-force",
-            "desc": "Generate a config file to specified path. Overwrite the existing one",
+            "desc": "Generate a config file at the specified path, overwriting any existing file",
             "remark": "Defaults to \"~/.config/fastfetch/config.jsonc\"",
             "arg": {
                 "type": "path",
@@ -97,7 +97,7 @@
     "General": [
         {
             "long": "thread",
-            "desc": "Use separate threads to send HTTP requests",
+            "desc": "Use separate threads for HTTP requests",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -123,9 +123,9 @@
         },
         {
             "long": "ds-force-drm",
-            "desc": "Set if only DRM should be used to detect displays",
+            "desc": "Specify whether only DRM should be used to detect displays",
             "remark": [
-                "Use this option if you encountered problems with other detection method.",
+                "Use this option if you encounter problems with other detection methods.",
                 "Linux only"
             ],
             "arg": {
@@ -133,7 +133,7 @@
                 "optional": true,
                 "default": "false",
                 "enum": {
-                    "true": "Try `libdrm` first, then `sysfs` if libdrm failed",
+                    "true": "Try `libdrm` first, then `sysfs` if libdrm fails",
                     "sysfs-only": "Use `/sys/class/drm` only",
                     "false": "Try `wayland`, then `x11`, then `drm`"
                 }
@@ -141,7 +141,7 @@
         },
         {
             "long": "detect-version",
-            "desc": "Whether to detect and display the version of terminal, shell and editor",
+            "desc": "Specify whether to detect and display versions of terminal, shell, editor, and others",
             "remark": "Mainly for benchmarking",
             "arg": {
                 "type": "bool",
@@ -155,31 +155,31 @@
             "short": "l",
             "long": "logo",
             "desc": "Set the logo source. Use \"none\" to disable the logo",
-            "remark": "Should be the name of a builtin logo, or a path to an image file. See also https://github.com/fastfetch-cli/fastfetch/wiki/Logo-options",
+            "remark": "Should be the name of a built-in logo or a path to an image file. See also https://github.com/fastfetch-cli/fastfetch/wiki/Logo-options",
             "arg": {
                 "type": "logo"
             }
         },
         {
             "long": "logo-type",
-            "desc": "Set the type of the logo given in \"--logo\"",
+            "desc": "Set the type of the logo specified in \"--logo\"",
             "remark": "See also https://github.com/fastfetch-cli/fastfetch/wiki/Logo-options",
             "arg": {
                 "type": "enum",
                 "enum": {
-                    "auto": "If something is given, first try builtin, then file. Otherwise detect logo",
-                    "builtin": "Builtin ascii art",
-                    "small": "Builtin ascii art, small version",
+                    "auto": "If something is given, first try built-in, then file. Otherwise detect logo",
+                    "builtin": "Built-in ASCII art",
+                    "small": "Built-in ASCII art, small version",
                     "file": "Text file, printed with color code replacement",
                     "file-raw": "Text file, printed as is",
                     "data": "Text data, printed with color code replacement",
                     "data-raw": "Text data, printed as is",
                     "sixel": "Image file, printed as sixel codes",
-                    "kitty": "Image file, printed as kitty graphics protocol",
-                    "kitty-direct": "Image file, tell the terminal emulator to read image data from the specified file (Supported by kitty and wezterm)",
-                    "kitty-icat": "Image file, use `kitten icat` to display the image. Requires binary `kitten` to be installed",
-                    "iterm": "Image file, printed as iterm graphics protocol",
-                    "chafa": "Image file, printed as ascii art using libchafa",
+                    "kitty": "Image file, printed using kitty graphics protocol",
+                    "kitty-direct": "Image file, tells the terminal emulator to read image data from the specified file",
+                    "kitty-icat": "Image file, uses `kitten icat` to display the image. Requires binary `kitten` to be installed",
+                    "iterm": "Image file, printed using iterm graphics protocol",
+                    "chafa": "Image file, printed as ASCII art using libchafa",
                     "raw": "Image file, printed as raw binary string",
                     "none": "Disable logo printing"
                 }
@@ -187,7 +187,7 @@
         },
         {
             "long": "logo-width",
-            "desc": "Set the width of the logo (in characters), if it is an image",
+            "desc": "Set the width of the logo (in characters) if it is an image",
             "remark": "Required for iTerm image protocol",
             "arg": {
                 "type": "num"
@@ -195,7 +195,7 @@
         },
         {
             "long": "logo-height",
-            "desc": "Set the height of the logo (in characters), if it is an image",
+            "desc": "Set the height of the logo (in characters) if it is an image",
             "remark": "Required for iTerm image protocol",
             "arg": {
                 "type": "num"
@@ -203,7 +203,7 @@
         },
         {
             "long": "logo-preserve-aspect-ratio",
-            "desc": "Set if the logo should fill the specified width and height as much as possible without stretching",
+            "desc": "Specify whether the logo should fill the specified width and height as much as possible without stretching",
             "remark": "Supported by iTerm image protocol only",
             "arg": {
                 "type": "bool",
@@ -213,7 +213,7 @@
         },
         {
             "long": "logo-color-[1-9]",
-            "desc": "Overwrite a color in the logo",
+            "desc": "Override a color in the logo",
             "remark": "See `-h color` for the list of available colors",
             "arg": {
                 "type": "color"
@@ -222,35 +222,35 @@
         },
         {
             "long": "logo-padding",
-            "desc": "Set the padding on the left and the right of the logo",
+            "desc": "Set the padding on the left and right sides of the logo",
             "arg": {
                 "type": "num"
             }
         },
         {
             "long": "logo-padding-left",
-            "desc": "Set the padding on the left of the logo",
+            "desc": "Set the padding on the left side of the logo",
             "arg": {
                 "type": "num"
             }
         },
         {
             "long": "logo-padding-right",
-            "desc": "Set the padding on the right of the logo",
+            "desc": "Set the padding on the right side of the logo",
             "arg": {
                 "type": "num"
             }
         },
         {
             "long": "logo-padding-top",
-            "desc": "Set the padding on the top of the logo",
+            "desc": "Set the padding at the top of the logo",
             "arg": {
                 "type": "num"
             }
         },
         {
             "long": "logo-print-remaining",
-            "desc": "Whether to print the remaining logo, if it has more lines than modules to display",
+            "desc": "Specify whether to print the remaining logo if it has more lines than modules to display",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -259,7 +259,7 @@
         },
         {
             "long": "logo-position",
-            "desc": "Set the position of the logo should be displayed",
+            "desc": "Set the position where the logo should be displayed",
             "arg": {
                 "type": "enum",
                 "enum": {
@@ -271,7 +271,7 @@
         },
         {
             "long": "logo-recache",
-            "desc": "If true, regenerate image logo cache",
+            "desc": "If true, regenerate the image logo cache",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -433,7 +433,7 @@
             "short": "s",
             "long": "structure",
             "desc": "Set the structure of the fetch",
-            "remark": "Must be a colon separated list of keys. Use \"fastfetch --list-modules\" to see the ones available",
+            "remark": "Must be a colon-separated list of keys. Use \"fastfetch --list-modules\" to see available options",
             "arg": {
                 "type": "structure",
                 "default": "\"fastfetch --print-structure\""
@@ -451,7 +451,7 @@
         {
             "long": "pipe",
             "desc": "Disable colors",
-            "remark": "Auto detection based on isatty(1)",
+            "remark": "Auto-detected based on isatty(1) by default",
             "arg": {
                 "type": "bool",
                 "optional": true
@@ -460,7 +460,7 @@
         {
             "long": "color-keys",
             "desc": "Set the color of the keys",
-            "remark": "Doesn't affect module Title, Separator and Colors. See `-h color` for the list of available colors",
+            "remark": "Doesn't affect Title, Separator, and Colors modules. See `-h color` for the list of available colors",
             "arg": {
                 "type": "color"
             }
@@ -491,8 +491,8 @@
         },
         {
             "long": "color",
-            "desc": "Set the color of both the keys and title",
-            "remark": "Shortcut of \"--color-keys <color>\" and \"--color-title <color>\"",
+            "desc": "Set the color of both keys and title",
+            "remark": "Shortcut for \"--color-keys <color>\" and \"--color-title <color>\"",
             "arg": {
                 "type": "color"
             }
@@ -513,7 +513,7 @@
         },
         {
             "long": "key-type",
-            "desc": "Set whether to show icon before string keys",
+            "desc": "Specify whether to show an icon before string keys",
             "arg": {
                 "type": "enum",
                 "enum": {
@@ -527,7 +527,7 @@
         },
         {
             "long": "bright-color",
-            "desc": "Set if the keys, title and ASCII logo should be printed in bright color",
+            "desc": "Specify whether keys, title, and ASCII logo should be printed in bright color",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -544,7 +544,7 @@
         },
         {
             "long": "show-errors",
-            "desc": "Print occurring errors",
+            "desc": "Print errors when they occur",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -553,7 +553,7 @@
         },
         {
             "long": "disable-linewrap",
-            "desc": "Whether to disable line wrap during the run",
+            "desc": "Specify whether to disable line wrap during execution",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -562,7 +562,7 @@
         },
         {
             "long": "hide-cursor",
-            "desc": "Whether to hide the cursor during the run",
+            "desc": "Specify whether to hide the cursor during execution",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -595,7 +595,7 @@
         },
         {
             "long": "percent-color-green",
-            "desc": "Set color used in green state of percentage bars and numbers",
+            "desc": "Set color used for the green state of percentage bars and numbers",
             "remark": "See `-h color` for the list of available colors",
             "arg": {
                 "type": "color",
@@ -604,7 +604,7 @@
         },
         {
             "long": "percent-color-yellow",
-            "desc": "Set color used in yellow state of percentage bars and numbers",
+            "desc": "Set color used for the yellow state of percentage bars and numbers",
             "remark": "See `-h color` for the list of available colors",
             "arg": {
                 "type": "color",
@@ -613,7 +613,7 @@
         },
         {
             "long": "percent-color-red",
-            "desc": "Set color used in red state of percentage bars and numbers",
+            "desc": "Set color used for the red state of percentage bars and numbers",
             "remark": "See `-h color` for the list of available colors",
             "arg": {
                 "type": "color",
@@ -622,7 +622,7 @@
         },
         {
             "long": "bar-char-elapsed",
-            "desc": "Set the character to use in elapsed part of percentage bars",
+            "desc": "Set the character to use in the elapsed part of percentage bars",
             "arg": {
                 "type": "str",
                 "default": "\u25a0"
@@ -630,7 +630,7 @@
         },
         {
             "long": "bar-char-total",
-            "desc": "Set the character to use in total part of percentage bars",
+            "desc": "Set the character to use in the total part of percentage bars",
             "arg": {
                 "type": "str",
                 "default": "-"
@@ -638,7 +638,7 @@
         },
         {
             "long": "bar-border-left",
-            "desc": "Set the string to use at left border of percentage bars",
+            "desc": "Set the string to use at the left border of percentage bars",
             "arg": {
                 "type": "string",
                 "default": "[ "
@@ -646,7 +646,7 @@
         },
         {
             "long": "bar-border-right",
-            "desc": "Set the string to use at right border of percentage bars",
+            "desc": "Set the string to use at the right border of percentage bars",
             "arg": {
                 "type": "string",
                 "default": " ]"
@@ -654,7 +654,7 @@
         },
         {
             "long": "bar-width",
-            "desc": "Set the width of percentage bars, in number of characters",
+            "desc": "Set the width of percentage bars in characters",
             "arg": {
                 "type": "num",
                 "default": 10
@@ -662,7 +662,7 @@
         },
         {
             "long": "no-buffer",
-            "desc": "Set if the stdout application buffer should be disabled",
+            "desc": "Specify whether the stdout application buffer should be disabled",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -678,7 +678,7 @@
         },
         {
             "long": "size-binary-prefix",
-            "desc": "Set the binary prefix to used when formatting sizes",
+            "desc": "Set the binary prefix to use when formatting sizes",
             "arg": {
                 "type": "enum",
                 "enum": {
@@ -710,7 +710,7 @@
         },
         {
             "long": "freq-ndigits",
-            "desc": "Set the number of digits to keep after the decimal point when printing CPU / GPU frequency in GHz",
+            "desc": "Set the number of digits to keep after the decimal point when printing CPU/GPU frequency in GHz",
             "arg": {
                 "type": "num",
                 "default": 2
@@ -718,7 +718,7 @@
         },
         {
             "long": "temp-unit",
-            "desc": "Set the unit of the temperature",
+            "desc": "Set the temperature unit",
             "arg": {
                 "type": "enum",
                 "enum": {
@@ -740,7 +740,7 @@
         },
         {
             "long": "temp-color-green",
-            "desc": "Set color used in green state of temperature values",
+            "desc": "Set color used for the green state of temperature values",
             "remark": "See `-h color` for the list of available colors",
             "arg": {
                 "type": "color",
@@ -749,7 +749,7 @@
         },
         {
             "long": "temp-color-yellow",
-            "desc": "Set color used in yellow state of temperature values",
+            "desc": "Set color used for the yellow state of temperature values",
             "remark": "See `-h color` for the list of available colors",
             "arg": {
                 "type": "color",
@@ -758,7 +758,7 @@
         },
         {
             "long": "temp-color-red",
-            "desc": "Set color used in red state of temperature values",
+            "desc": "Set color used for the red state of temperature values",
             "remark": "See `-h color` for the list of available colors",
             "arg": {
                 "type": "color",
@@ -769,7 +769,7 @@
     "Module specific": [
         {
             "long": "title-fqdn",
-            "desc": "Set if the title should use fully qualified domain name",
+            "desc": "Specify whether the title should use fully qualified domain name",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -778,7 +778,7 @@
         },
         {
             "long": "title-color-user",
-            "desc": "Set color of the user name (left part)",
+            "desc": "Set the color of the user name (left part)",
             "remark": "See `-h color` for the list of available colors",
             "arg": {
                 "type": "color",
@@ -787,7 +787,7 @@
         },
         {
             "long": "title-color-at",
-            "desc": "Set color of the @ symbol (middle part)",
+            "desc": "Set the color of the @ symbol (middle part)",
             "remark": "See `-h color` for the list of available colors",
             "arg": {
                 "type": "color",
@@ -796,7 +796,7 @@
         },
         {
             "long": "title-color-host",
-            "desc": "Set color of the host name (right part)",
+            "desc": "Set the color of the host name (right part)",
             "remark": "See `-h color` for the list of available colors",
             "arg": {
                 "type": "color",
@@ -822,7 +822,7 @@
         {
             "long": "separator-length",
             "desc": "Set the length of the separator line",
-            "remark": "Set to 0 to automatically calculate it with the title length",
+            "remark": "Set to 0 to automatically calculate it based on the title length",
             "arg": {
                 "type": "num",
                 "default": "0"
@@ -830,8 +830,8 @@
         },
         {
             "long": "disk-folders",
-            "desc": "A colon (semicolon on Windows) separated list of folder paths to be detected",
-            "remark": "On Windows, a drive latter must be upper cased and end with \"\\\". \"/\" is used as an alias of the system drive. This option overrides other disk-show-* options",
+            "desc": "A colon (semicolon on Windows) separated list of folder paths to detect",
+            "remark": "On Windows, a drive letter must be upper-cased and end with \"\\\". \"/\" is used as an alias of the system drive. This option overrides other disk-show-* options",
             "arg": {
                 "type": "path",
                 "default": "Auto detection using mount-points"
@@ -839,7 +839,7 @@
         },
         {
             "long": "disk-show-regular",
-            "desc": "Set if regular volume should be printed",
+            "desc": "Specify whether regular volumes should be displayed",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -848,7 +848,7 @@
         },
         {
             "long": "disk-show-external",
-            "desc": "Set if external volume should be printed",
+            "desc": "Specify whether external volumes should be displayed",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -857,7 +857,7 @@
         },
         {
             "long": "disk-show-hidden",
-            "desc": "Set if hidden volumes should be printed",
+            "desc": "Specify whether hidden volumes should be displayed",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -866,7 +866,7 @@
         },
         {
             "long": "disk-show-subvolumes",
-            "desc": "Set if subvolumes should be printed",
+            "desc": "Specify whether subvolumes should be displayed",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -875,7 +875,7 @@
         },
         {
             "long": "disk-show-readonly",
-            "desc": "Set if read only volumes should be printed",
+            "desc": "Specify whether read-only volumes should be displayed",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -884,7 +884,7 @@
         },
         {
             "long": "disk-show-unknown",
-            "desc": "Set if unknown (unable to detect sizes) volumes should be printed",
+            "desc": "Specify whether unknown volumes (unable to detect sizes) should be displayed",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -894,7 +894,7 @@
         {
             "long": "disk-use-available",
             "desc": "Use f_bavail (lpFreeBytesAvailableToCaller for Windows) instead of f_bfree to calculate used bytes",
-            "remark": "Maybe required for macOS to print correct results",
+            "remark": "May be required for macOS to display correct results",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -911,7 +911,7 @@
         },
         {
             "long": "diskio-name-prefix",
-            "desc": "Show disks with given name prefix only",
+            "desc": "Show only disks with the given name prefix",
             "arg": {
                 "type": "str"
             }
@@ -926,7 +926,7 @@
         },
         {
             "long": "physicaldisk-name-prefix",
-            "desc": "Show disks with given name prefix only",
+            "desc": "Show only disks with the given name prefix",
             "arg": {
                 "type": "str"
             }
@@ -942,7 +942,7 @@
         },
         {
             "long": "bluetooth-show-disconnected",
-            "desc": "Set if disconnected bluetooth devices should be printed",
+            "desc": "Specify whether disconnected Bluetooth devices should be displayed",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -951,10 +951,10 @@
         },
         {
             "long": "packages-disabled",
-            "desc": "A colon separated list of package managers to be disabled when detecting",
+            "desc": "A colon-separated list of package managers to disable when detecting",
             "remark": [
                 "Some detection methods can be very slow.",
-                "You may need to increase value of '--processing-timeout' to make it actually work.",
+                "You may need to increase the value of '--processing-timeout' to make it work properly.",
                 "Use `--packages-disabled none` to enable all."
             ],
             "arg": {
@@ -964,7 +964,7 @@
         },
         {
             "long": "display-compact-type",
-            "desc": "Set if all displays should be printed in one line",
+            "desc": "Specify whether all displays should be printed in one line",
             "arg": {
                 "type": "enum",
                 "enum": {
@@ -979,7 +979,7 @@
         },
         {
             "long": "display-precise-refresh-rate",
-            "desc": "Set if decimal refresh rates should not be rounded into integers when printing",
+            "desc": "Specify whether decimal refresh rates should not be rounded to integers when printing",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -988,21 +988,21 @@
         },
         {
             "long": "display-order",
-            "desc": "Set the order should be used when printing displays",
+            "desc": "Set the order to use when printing displays",
             "arg": {
                 "type": "enum",
                 "enum": {
                     "none": "Use the detected order",
-                    "asc": "Sort by display name ascendingly",
-                    "desc": "Sort by display name descendingly"
+                    "asc": "Sort by display name in ascending order",
+                    "desc": "Sort by display name in descending order"
                 },
                 "default": "none"
             }
         },
         {
             "long": "brightness-ddcci-sleep",
-            "desc": "Set the sleep times (in ms) when sending DDC/CI requests",
-            "remark": "See <https://www.ddcutil.com/performance_options/#option-sleep-multiplier> for detail",
+            "desc": "Set the sleep time (in ms) when sending DDC/CI requests",
+            "remark": "See <https://www.ddcutil.com/performance_options/#option-sleep-multiplier> for details",
             "arg": {
                 "type": "num",
                 "default": 10
@@ -1010,7 +1010,7 @@
         },
         {
             "long": "brightness-compact",
-            "desc": "Set if multiple results should be printed in one line",
+            "desc": "Specify whether multiple results should be printed in one line",
             "arg": {
                 "type": "bool",
                 "default": false
@@ -1018,7 +1018,7 @@
         },
         {
             "long": "sound-type",
-            "desc": "Set what type of sound devices should be printed",
+            "desc": "Set which types of sound devices should be displayed",
             "arg": {
                 "type": "enum",
                 "enum": {
@@ -1031,9 +1031,9 @@
         },
         {
             "long": "battery-use-setup-api",
-            "desc": "Set if \"SetupAPI\" should be used on Windows to detect battery info",
+            "desc": "Specify whether \"SetupAPI\" should be used on Windows to detect battery info",
             "remark": [
-                "SetupAPI supports multi batteries, but slower.",
+                "SetupAPI supports multiple batteries, but is slower.",
                 "Windows only"
             ],
             "arg": {
@@ -1053,7 +1053,7 @@
         },
         {
             "long": "cpu-show-pe-core-count",
-            "desc": "Detect and display CPU frequency of different core types (eg. Pcore and Ecore) if supported",
+            "desc": "Detect and display CPU frequency of different core types (e.g., P-cores and E-cores) if supported",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1071,7 +1071,7 @@
         },
         {
             "long": "cpuusage-separate",
-            "desc": "Display CPU usage per CPU logical core, instead of an average result",
+            "desc": "Display CPU usage per logical core, instead of an average result",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1088,9 +1088,9 @@
         },
         {
             "long": "de-slow-version-detection",
-            "desc": "Set if DE version should be detected with slow operations",
+            "desc": "Specify whether DE version should be detected with slower operations",
             "remark": [
-                "It's only used as a fallback method. Please file a bug report if you encounter any issues.",
+                "This is only used as a fallback method. Please file a bug report if you encounter any issues.",
                 "Linux only"
             ],
             "arg": {
@@ -1110,11 +1110,8 @@
         },
         {
             "long": "gpu-driver-specific",
-            "desc": "Use driver specific method to detect more detailed GPU information (memory usage, core count, etc)",
-            "remark": [
-                "Correctly NVML (NVIDIA) and IGCL (Intel, Windows only) are supported.",
-                "Both require the latest proprietary driver to be installed."
-            ],
+            "desc": "Use driver-specific methods to detect more detailed GPU information (memory usage, core count, etc.)",
+            "remark": "Requires the latest GPU drivers to be installed.",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1124,14 +1121,14 @@
         {
             "long": "gpu-detection-method",
             "desc": "Force using a specified method to detect GPUs",
-            "remark": "Will fall back to next methods if the specified method fails",
+            "remark": "Will fall back to other methods if the specified method fails",
             "arg": {
                 "type": "enum",
                 "enum": {
-                    "auto": "Query platform specific graphic APIs. Requires proper GPU drivers installed. Not supported on FreeBSD",
-                    "pci": "Search PCI devices, which do not requires GPU driver installed. Not supported on Windows and macOS",
-                    "vulkan": "Use Vulkan API. Slow and requires proper vulkan driver installed. Used for Android",
-                    "opencl": "Use OpenCL API. Slow and requires proper OpenCL driver installed",
+                    "auto": "Query platform-specific graphics APIs. Requires proper GPU drivers to be installed. Not supported on BSDs",
+                    "pci": "Search PCI devices, which does not require GPU drivers to be installed. Not supported on Windows and macOS",
+                    "vulkan": "Use Vulkan API. Slow and requires proper Vulkan drivers to be installed. Used for Android",
+                    "opencl": "Use OpenCL API. Slow and requires proper OpenCL drivers to be installed",
                     "opengl": "Use OpenGL API. Slow and only detects one GPU"
                 },
                 "default": "auto"
@@ -1139,7 +1136,7 @@
         },
         {
             "long": "gpu-hide-type",
-            "desc": "Specify the type of GPUs should not be printed",
+            "desc": "Specify which types of GPUs should not be displayed",
             "arg": {
                 "type": "enum",
                 "enum": {
@@ -1152,7 +1149,7 @@
         },
         {
             "long": "battery-temp",
-            "desc": "Detect and display Battery temperature if supported",
+            "desc": "Detect and display battery temperature if supported",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1178,7 +1175,7 @@
         },
         {
             "long": "localip-show-ipv4",
-            "desc": "Show IPv4 addresses in local ip module",
+            "desc": "Show IPv4 addresses in the local IP module",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1187,7 +1184,7 @@
         },
         {
             "long": "localip-show-ipv6",
-            "desc": "Show IPv6 addresses in local ip module",
+            "desc": "Show IPv6 addresses in the local IP module",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1196,7 +1193,7 @@
         },
         {
             "long": "localip-show-mac",
-            "desc": "Show mac addresses in local ip module",
+            "desc": "Show MAC addresses in the local IP module",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1205,7 +1202,7 @@
         },
         {
             "long": "localip-show-loop",
-            "desc": "Show loop back addresses (127.0.0.1) in local ip module",
+            "desc": "Show loopback addresses (127.0.0.1) in the local IP module",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1214,7 +1211,7 @@
         },
         {
             "long": "localip-show-mtu",
-            "desc": "Show net interface's MTU (Maximum Transmission Unit) size in bytes",
+            "desc": "Show network interface MTU (Maximum Transmission Unit) size in bytes",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1223,7 +1220,7 @@
         },
         {
             "long": "localip-show-speed",
-            "desc": "Show net interface's link speed with human-readable format (or an 1Mb units integer in JSON format)",
+            "desc": "Show network interface link speed in human-readable format (or as a 1Mb units integer in JSON format)",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1232,7 +1229,7 @@
         },
         {
             "long": "localip-show-prefix-len",
-            "desc": "Show network prefix length (/N) in local ip module",
+            "desc": "Show network prefix length (/N) in the local IP module",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1241,14 +1238,14 @@
         },
         {
             "long": "localip-name-prefix",
-            "desc": "Show interfaces with given interface name prefix only",
+            "desc": "Show only interfaces with the given interface name prefix",
             "arg": {
                 "type": "str"
             }
         },
         {
             "long": "localip-default-route-only",
-            "desc": "Show the interface that is used for default routing only",
+            "desc": "Show only the interface that is used for default routing",
             "remark": "Doesn't work on Android",
             "arg": {
                 "type": "bool",
@@ -1258,7 +1255,7 @@
         },
         {
             "long": "localip-show-all-ips",
-            "desc": "Show all IPs bound to the same interface. By default only the first IP is shown",
+            "desc": "Show all IPs bound to the same interface. By default, only the first IP is shown",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1267,7 +1264,7 @@
         },
         {
             "long": "localip-show-flags",
-            "desc": "Show net interface flags in local ip module",
+            "desc": "Show network interface flags in the local IP module",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1285,7 +1282,7 @@
         },
         {
             "long": "dns-show-type",
-            "desc": "Specify the type of DNS servers should be detected",
+            "desc": "Specify which types of DNS servers should be detected",
             "arg": {
                 "type": "enum",
                 "enum": {
@@ -1298,14 +1295,14 @@
         },
         {
             "long": "netio-name-prefix",
-            "desc": "Show interfaces with given name prefix only",
+            "desc": "Show only interfaces with the given name prefix",
             "arg": {
                 "type": "str"
             }
         },
         {
             "long": "netio-default-route-only",
-            "desc": "Show the interfac that is used for default routing only",
+            "desc": "Show only the interface that is used for default routing",
             "remark": "Doesn't work on Android",
             "arg": {
                 "type": "bool",
@@ -1331,7 +1328,7 @@
         },
         {
             "long": "publicip-timeout",
-            "desc": "Time in milliseconds to wait for the public ip server to respond",
+            "desc": "Time in milliseconds to wait for the public IP server to respond",
             "remark": "0 to disable timeout",
             "arg": {
                 "type": "num",
@@ -1340,14 +1337,14 @@
         },
         {
             "long": "publicip-url",
-            "desc": "The URL of public IP detection server to be used",
+            "desc": "The URL of the public IP detection server to use",
             "arg": {
                 "type": "str"
             }
         },
         {
             "long": "publicip-ipv6",
-            "desc": "Whether to use IPv6 for public IP detection server",
+            "desc": "Specify whether to use IPv6 for the public IP detection server",
             "arg": {
                 "type": "bool",
                 "default": false
@@ -1355,8 +1352,8 @@
         },
         {
             "long": "weather-location",
-            "desc": "Set the location to be used",
-            "remark": "Must be URI encoded (e.g. a whitespace must be encoded as \"+\")",
+            "desc": "Set the location to use",
+            "remark": "Must be URI encoded (e.g., a whitespace must be encoded as \"+\")",
             "arg": {
                 "type": "str"
             }
@@ -1372,7 +1369,7 @@
         },
         {
             "long": "weather-output-format",
-            "desc": "The output weather format to be used",
+            "desc": "The output weather format to use",
             "remark": "Must be URI encoded",
             "arg": {
                 "type": "str"
@@ -1380,7 +1377,7 @@
         },
         {
             "long": "wm-detect-plugin",
-            "desc": "Set if window manager plugin should be detected on supported platforms",
+            "desc": "Specify whether window manager plugins should be detected on supported platforms",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1398,7 +1395,7 @@
         },
         {
             "long": "users-myself-only",
-            "desc": "Show only current user",
+            "desc": "Show only the current user",
             "arg": {
                 "type": "bool",
                 "optional": true,
@@ -1407,7 +1404,7 @@
         },
         {
             "long": "player-name",
-            "desc": "The name of the player to use for module Media and Player",
+            "desc": "The name of the player to use for the Media and Player modules",
             "remark": "Linux only",
             "arg": {
                 "type": "str"
@@ -1419,7 +1416,7 @@
             "arg": {
                 "type": "enum",
                 "enum": {
-                    "auto": "Prefer EGL on *nix; prefer platform specific implementation on others",
+                    "auto": "Prefer EGL on *nix; prefer platform-specific implementation on others",
                     "egl": "EGL",
                     "glx": "GLX (*nix only)"
                 },
@@ -1436,8 +1433,8 @@
         },
         {
             "long": "command-param",
-            "desc": "Set the parameter used when starting the shell",
-            "remark": "If set to empty string, it will be ignored",
+            "desc": "Set the parameter to use when starting the shell",
+            "remark": "If set to an empty string, it will be ignored",
             "arg": {
                 "type": "str",
                 "default": "\"/c\" for Windows; \"-c\" for *nix"
@@ -1452,14 +1449,14 @@
         },
         {
             "long": "command-text",
-            "desc": "Set the command text to be executed",
+            "desc": "Set the command text to execute",
             "arg": {
                 "type": "str"
             }
         },
         {
             "long": "colors-symbol",
-            "desc": "Set the symbol to be printed by Colors module",
+            "desc": "Set the symbol to be printed by the Colors module",
             "arg": {
                 "type": "enum",
                 "enum": {
@@ -1525,9 +1522,9 @@
         {
             "long": "<module>-format",
             "desc": [
-                "Set the format string to use for each specific module",
+                "Set the format string to use for a specific module",
                 "To see how a format string works, use \"fastfetch -h format\".",
-                "To see help about a specific format string, use \"fastfetch -h <module>-format\""
+                "For help about a specific format string, use \"fastfetch -h <module>-format\""
             ],
             "arg": {
                 "type": "format"
@@ -1537,9 +1534,9 @@
         {
             "long": "<module>-key",
             "desc": [
-                "Set the key to use for each specific module.",
-                "For modules which print multiple lines, the string is parsed",
-                "as a format string with the index as first character"
+                "Set the key to use for a specific module.",
+                "For modules that print multiple lines, the string is parsed",
+                "as a format string with the index as the first character"
             ],
             "arg": {
                 "type": "key"
@@ -1548,7 +1545,7 @@
         },
         {
             "long": "<module>-key-color",
-            "desc": "Override the global \"--color-keys\" option for each specific module",
+            "desc": "Override the global \"--color-keys\" option for a specific module",
             "arg": {
                 "type": "color"
             },
@@ -1564,7 +1561,7 @@
         },
         {
             "long": "<module>-output-color",
-            "desc": "Override the global \"--color-output\" option for each specific module",
+            "desc": "Override the global \"--color-output\" option for a specific module",
             "arg": {
                 "type": "color"
             },
@@ -1572,7 +1569,7 @@
         },
         {
             "long": "<module>-key-width",
-            "desc": "Override the global \"--key-width\" option for each specific module",
+            "desc": "Override the global \"--key-width\" option for a specific module",
             "arg": {
                 "type": "num"
             },
@@ -1581,8 +1578,8 @@
         {
             "long": "<module>-percent-green",
             "desc": [
-                "Threshold of percentage colors",
-                "Value less then percent-green will be shown in green"
+                "Threshold for percentage color ranges",
+                "Values less than percent-green will be shown in green"
             ],
             "arg": {
                 "type": "num"
@@ -1592,9 +1589,9 @@
         {
             "long": "<module>-percent-yellow",
             "desc": [
-                "Threshold of percentage colors",
-                "Value greater than percent-green and less then yellow will be shown in yellow",
-                "Value greater than percent-yellow will be shown in red"
+                "Threshold for percentage color ranges",
+                "Values greater than percent-green and less than percent-yellow will be shown in yellow",
+                "Values greater than percent-yellow will be shown in red"
             ],
             "arg": {
                 "type": "num"
@@ -1605,7 +1602,7 @@
             "long": "<module>-percent-type",
             "desc": "Set the percentage output type",
             "remark": [
-                "0 for use global `--percent-type` value",
+                "0 to use global `--percent-type` value",
                 "1 for percentage number",
                 "2 for multi-color bar",
                 "3 for both",
@@ -1622,8 +1619,8 @@
         {
             "long": "<module>-temp-green",
             "desc": [
-                "Threshold of temperature colors",
-                "Value less then temp-green will be shown in green"
+                "Threshold for temperature color ranges",
+                "Values less than temp-green will be shown in green"
             ],
             "arg": {
                 "type": "num"
@@ -1633,9 +1630,9 @@
         {
             "long": "<module>-temp-yellow",
             "desc": [
-                "Threshold of temperature colors",
-                "Value greater than temp-green and less then yellow will be shown in yellow",
-                "Value greater than temp-yellow will be shown in red"
+                "Threshold for temperature color ranges",
+                "Values greater than temp-green and less than temp-yellow will be shown in yellow",
+                "Values greater than temp-yellow will be shown in red"
             ],
             "arg": {
                 "type": "num"
diff --git a/src/data/help_color.txt b/src/data/help_color.txt
index 9adcb1c88..821644df9 100644
--- a/src/data/help_color.txt
+++ b/src/data/help_color.txt
@@ -1,24 +1,25 @@
 Usage: fastfetch --color <color>
 
-Shortcut of `fastfetch --color-keys <color> --color-title <color>`.
-If no color is set, the main color of the logo will be used.
+This is a shortcut for `fastfetch --color-keys <color> --color-title <color>`.
+If no color is specified, the main color of the logo will be used.
 
-Following information applies to all settings
+The following information applies to all color settings:
+
+<color> must be a color encoding in ANSI escape sequence format. It is inserted between "ESC[" and "m".
+More information about ANSI escape codes can be found here: https://en.wikipedia.org/wiki/ANSI_escape_code#SGR_(Select_Graphic_Rendition)_parameters.
 
-<color> must be a color encoding as ANSI escape sequences. It is inserted between "ESC[" and "m".
-Infos about them can be found here: https://en.wikipedia.org/wiki/ANSI_escape_code#SGR_(Select_Graphic_Rendition)_parameters.
 Examples:
    35:              sets the color to magenta
-   38;5;38:         sets the color to 38th color of ANSI 256 colors
+   38;5;38:         sets the color to the 38th color in the ANSI 256 color palette
    4;92:            sets the color to bright green with underline
-   5;104:           blinking text on a blue background
+   5;104:           sets blinking text on a blue background
 
 ANSI named colors are also supported:
    magenta:         equivalent to `35`
    underline_bright_green: equivalent to `4;92`
 
-After v2.15.0, some special keys can be used:
-   keys:            use the color set by `--color-keys`
-   title:           use the color set by `--color-title`
-   output:          use the color set by `--color-output`
-   separator:       use the color set by `--color-separator`
+Since v2.15.0, the following special keywords can be used:
+   keys:            uses the color set by `--color-keys`
+   title:           uses the color set by `--color-title`
+   output:          uses the color set by `--color-output`
+   separator:       uses the color set by `--color-separator`
diff --git a/src/data/help_footer.txt b/src/data/help_footer.txt
index 0d478fb1d..4110521c6 100644
--- a/src/data/help_footer.txt
+++ b/src/data/help_footer.txt
@@ -1,4 +1,4 @@
-Parsing is not case sensitive. E.g. "--lib-PCI" is equal to "--Lib-Pci"
+Parsing is not case sensitive. E.g. "--print-logos" is equal to "--Print-Logos"
 If a value starts with a ?, it is optional. An optional boolean value defaults to true if not specified.
 More detailed help messages for each options can be printed with "-h <option_without_dash_prefix>"
 All options can be made permanent with command "fastfetch <options> --gen-config"
diff --git a/src/data/help_format.txt b/src/data/help_format.txt
index 5a66086e3..31d017905 100644
--- a/src/data/help_format.txt
+++ b/src/data/help_format.txt
@@ -1,55 +1,56 @@
-A format string is a string that contains placeholders for values.
-These placeholders begin with a '{', containing the index of the value, and end with a '}'.
-For example the format string "Values: {1} ({2})", with the values "First" and "My second val", will produce "Values: First (My second val)".
-The format string can contain placeholders in any order and have multiple occurrences.
-To include spaces when setting from the command line, surround the whole string with double quotes (").
+A format string is a text string that contains placeholders for values.
+These placeholders begin with a '{', contain the index of the value, and end with a '}'.
+For example, the format string "Values: {1} ({2})" with the values "First" and "My second val" will produce "Values: First (My second val)".
+Format strings can contain placeholders in any order and include multiple occurrences of the same placeholder.
+When setting a format string from the command line that contains spaces, surround the entire string with double quotes (").
 
-In 2.14.0 or newer, the value indices can be meaningful named tags.
-For example: "--title-format '{user-name-colored}{at-symbol-colored}{host-name-colored}'" is equivalent to "--title-format '{6}{7}{8}'"
+In version 2.14.0 or newer, value indices can be meaningful named tags.
+For example: "--title-format '{user-name-colored}{at-symbol-colored}{host-name-colored}'" is equivalent to "--title-format '{6}{7}{8}'".
 See "fastfetch -h title-format" for all supported tags.
 
-In 2.17.0 or newer, a truncation length can be specified using syntax '<arg>:<trunc-length>`
-For example: "--title-format '{user-name:5}'" will truncate user name into 5-length string.
-If '<trunc-length>' is negative, an ellipsis … will be appended at the end when the original string is truncated.
-Note: The string length is counted in raw bytes. Multi-byte unicode characters and ANSI escape codes are not taken into account.
+In version 2.17.0 or newer, a truncation length can be specified using the syntax '{arg:trunc-length}'.
+For example: "--title-format '{user-name:5}'" will truncate the user name to a 5-character string.
+If 'trunc-length' is negative, an ellipsis (…) will be appended when the string is truncated.
+Note: String length is counted in raw bytes. Multi-byte Unicode characters and ANSI escape codes are not taken into account.
 
-In 2.23.0 or newer, `<` or `>` can be specified instead of `:` to set a left or right padding.
-For example: "--title-format '{user-name<20}'" will generate `<user-name>         `;
-"--title-format '{user-name>20}'" will generate `         <user-name>`
+In version 2.23.0 or newer, '<' or '>' can be used instead of ':' to set left or right padding.
+For example: "--title-format '{user-name<20}'" will generate `<user-name>         ` (left-aligned with spaces),
+while "--title-format '{user-name>20}'" will generate `         <user-name>` (right-aligned with spaces).
 
-In 2.24.0 or newer, `{~startIndex,endIndex}` can be specified to slice a string. Negative index counts back from the end of the string.
-If an index is omitted, 0 is used. For example, both `{~,0}` `{~0,}` and `{~,}` are same as `{~0,0}` and will always generate a empty string.
-If `,endIndex` is omitted or greater than the length of the string, the length of string is used.
+In version 2.24.0 or newer, '{~startIndex,endIndex}' can be specified to slice a string. Negative indices count backward from the end of the string.
+If an index is omitted, 0 is used by default. For example, '{~,0}', '{~0,}', and '{~,}' are all equivalent to '{~0,0}' and will generate an empty string.
+If ',endIndex' is omitted or greater than the string length, the length of the string is used instead.
 
-In 2.36.0 or newer, `{$NUM}` can be specified to reference a constant defined in `display.constants`. `{$ENV_VAR}` can be specified to reference an environment variable.
+In version 2.36.0 or newer, '{$NUM}' can be used to reference a constant defined in `display.constants`, and '{$ENV_VAR}' can be used to reference an environment variable.
 
-If the value index is missing, meaning the placeholder is "{}", an internal counter sets the value index.
+If a value index is missing (empty placeholder: "{}"), an internal counter automatically assigns the next sequential value.
 This means that the format string "Values: {1} ({2})" is equivalent to "Values: {} ({})".
-Note that this counter only counts empty placeholders, so the format string "{2} {} {}" will contain the second value, then the first, and then the second again.
+Note that this counter only increments for empty placeholders, so the format string "{2} {} {}" will contain the second value, then the first, and then the second again.
 
-To make formatting easier, a double open curly brace ("{{") will be printed as a single open curly brace and not counted as the beginning of a placeholder.
-If a value index is misformatted or wants a non-existing value, it will be printed as is, with the curly braces around it.
-If the last placeholder isn't closed, it will be treated like it was at the end of the format string.
+To simplify formatting, a double open curly brace ("{{") will be printed as a single open curly brace ('{') and not be treated as the beginning of a placeholder.
+If a value index is incorrectly formatted or references a non-existent value, it will be printed as-is with the curly braces preserved.
+If the final placeholder is not closed, it will be treated as if it were closed at the end of the format string.
 
-To only print something if a variable is set, use "{?<index>} ... {?}".
-For example, to only print a second value if it is set, use "{?2} Second value: {2}{?}".
-If a "{?}" is found without an opener, it is printed as is.
+To conditionally print content only when a variable is set, use "{?<index>} ... {?}".
+For example, to print a second value only if it is set, use "{?2} Second value: {2}{?}".
+If a "{?}" is found without a corresponding opener, it is printed as-is.
 
-To only print something if a variable is not set, do the same as with if, just replace every '?' with a '/'.
-For example to print a fallback for a second value if it is not set, use "{?2}{2}{?}{/2}Second value fallback{/}".
+To conditionally print content only when a variable is NOT set, use "{/<index>} ... {/}" (same syntax as above, but with '/' instead of '?').
+For example, to print a fallback for a second value if it is not set, use "{?2}{2}{?}{/2}Second value fallback{/}".
 
-To stop formatting at any point in the format string, use "{-}".
+To terminate formatting at any point in the format string, use "{-}".
 
-To print something with color, start a placeholder with a '#' and then the linux terminal color encoding.
-"\033[" at the start, and an 'm' at the end is automatically added, so don't do that.
-A "{#}" is equivalent to a "{#0}" and resets everything to normal.
-For example to print something pink and underline, use "{#4;35}...{#}". "{#underline_magenta}" is also supported. See `fastfetch -h color` for detail.
-Information about what the numbers mean can be found here: https://en.wikipedia.org/wiki/ANSI_escape_code#SGR_(Select_Graphic_Rendition)_parameters.
-Which escape codes are supported and how they look is defined by your terminal.
+To apply color to text, start a placeholder with '#' followed by Linux terminal color codes.
+The escape sequence "\033[" at the start and 'm' at the end are automatically added, so you don't need to include them.
+"{#}" is equivalent to "{#0}" and resets all formatting to normal.
+For example, to print text in pink and underlined, use "{#4;35}...{#}". Named formats like "{#underline_magenta}" are also supported.
+See `fastfetch -h color` for details about supported color codes.
+Information about color code meanings can be found at: https://en.wikipedia.org/wiki/ANSI_escape_code#SGR_(Select_Graphic_Rendition)_parameters.
+The supported escape codes and their appearance depend on your terminal.
 
-If a format string evaluates to an empty value, the whole line in the output will be discarded.
-You can therefore use --host-format " " to disable host output.
-Note that --host-format "" would evaluate as not set, and therefore use the built-in host format
+If a format string evaluates to an empty value, the entire line will be omitted from the output.
+You can use this behavior to disable specific outputs, for example: "--host-format " " will disable host output.
+Note that "--host-format ""' (empty string) would be treated as not set, and therefore the built-in host format would be used.
 
-Format string is also the way to go to set a fixed value - just use one without placeholders.
-For example when running in headless mode, you could use "--display-format Preferred".
+Format strings can also be used to set fixed values—simply use a string without any placeholders.
+For example, when running in headless mode, you could use "--display-format Preferred".